New Airsoft Guns & Products

If you're tricking out your M4/AR-15 AEG, the G&G Armament M4 AEG Pistol Grip is a great affordable option! This grip follows the standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style.

The style of this pistol grip replicates the real steel "A2" finger-ridged pistol grip commonly found on military-issue M4, M16 and MK18 rifles. This grip has an ergonomic design with a finger ridge for improved comfort whilst aiming down sights and carrying your platform. The set includes a heatsink motor baseplate pre-installed. If you're going for a military-style build, this is the grip for you!

This VFC 4" Barrel Extension will sit on the end of your current 14mm outer barrel and provide 4" of extra barrel length but keep the same male 14mm CCW threading which can make all the difference when trying to get your muzzle device to sit perfectly on the end of your platform. Alternatively, it is perfect for making your outer barrel ridiculously long, if you are trying to achieve one seriously mean-looking DMR.

This barrel extension is extremely useful for mounting tracer units and large suppressors on platforms which you previously couldn't.

If you're after a cheap sniper scope to get a better view of your targets, the PCS 4X32 Rifle Scope is a great budget option! Packaged with a pair of 25mm scope rings for 20mm Picatinny rails, this scope is ready to mount on any Airsoft rifle with a 20mm Picatinny rail on the top. 

This scope offers fixed 4x magnification and adjustable windage and elevation, ideal for long-range Airsoft engagements. Adjustments can be applied by removing the caps from each of the turrets and turning the concealed dial inside with a flat tool. This means your zero will be maintained regardless of any mid-skirmish bumps or scrapes and also helps keep dust and debris out of the delicate internals of the scope. If you want to sample long range Airsoft warfare without spending too much, the PCS 4X32 Rifle Scope is a fantastic entry-level scope!

If your 1911 Pistol had an underwhelming performance in the cold weather, you need a CO2 magazine and the performance will be much better! CO2 is much better in cold weather and yields a far, stronger recoil, meaning gassing out is a thing of the past! Also remember that CO2 does not contain any lubricant of its' own, and so you will need to lubricate your Pistol regularly using a Silicon Lubricant, such as: Abbey Silicone Gun Oil 35 Spray.

Just remember that the laws of physics still apply, and if you try to dump an entire Magazine quickly, you could cause damage to the Nozzle of your Pistol. Please ensure that all CO2 has been used in the Magazine before attempting to remove the Bulb, as it could still be under pressure. Excess CO2 is best used by firing the Pistol, rather than pressing the knocker valve on the back of the Magazine.

Keep your 1911 performing well no matter the weather with the WE 15rnd CO2 Magazine for 1911 GBB Pistols, come rain or snow your 1911 will still be able to complete the mission.

If you've had a cut-off lever failure or you like to keep parts on hand just in case the worst happens, the G&G Armament Cut Off Lever For V2 Gearbox is perfect. This is a replacement original part constructed from alloy, compatible with most version 2 gearboxes on the market.

The cut-off lever is a piece that sits between your trigger and sector gear and serves to interrupt or disconnect the trigger once your gearbox has made a complete cycle, very useful!

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 30mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard Picatinny rail sections, often found atop your Airsoft platform. To secure your rifle scope, you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

For those working on a build which pushes the limits, you will require some decent gears! Introducing the VFC Avalon 18:1 Steel gearset, a standard ratio gearset constructed from hardened steel. The set includes a spur gear, sector gear, and bevel gear which are all precisely machined for perfect meshing and smooth, reliable performance.

These gears are tuned to an 18:1 ratio, which means for every 18 revolutions of your motor the gearbox will complete one full cycle. The benefit of using standard ratio gears is that you can make either a DMR or a high-rate-of-fire CQB beast without wholly committing to one or another, meaning you can adapt your build to the scenario which suits, and without overstressing the gearbox by running it considerably beyond its design parameters.

Treat your AEG to some premium gears and have it shooting consistently for a long long time, plus you have the flexibility of running a DMR one day, then alternating to a rapid-fire monster the next day!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you've lost your front body pin, you're in luck! The Delta Armory Front Body Pin for M4/AR-15 AEGs is a replacement original part for Delta Armory M4/AR-15 AEGs with a polymer receiver but should also fit most other brands, such as Specna Arms, Lancer Tactical and Evolution. The pin slides straight into your receiver and may require some force to ensure it is tightly secured.

Keep your assault rifle in one piece with a replacement Delta Armory Steel Front Body Pin For M4/AR-15 AEGs, nobody wants their receiver to fall to bits out on the battlefield!

If you're working on a beast of a sniper rifle, the Trusight TDC Conversion Kit for VSR-10 will get you there! This TDC HOP-up conversion set is a very impressive design, providing TDC functionality for reduced side-to-side deviation and a stronger HOP-up effect without requiring your outer barrel to be drilled!

That said, limited modifications to the TDC carrier are required due to purposely being made off-spec. This allows you to get the perfect fit for your specific HOP-up chamber by carefully filing it down with hand files. Installation instructions are available on the Trusight Website but for those who don't like reading, check out the video here.

The main benefits of this set over other TDC kits are it doesn't require any permanent modifications to your original VSR-10 parts and you won't need to carry an Allen key in-game or ruin the looks of your VSR with a dial on the top of the barrel as you'll be using the original slider adjuster. Compatibility-wise, this set is designed specifically for the Tokyo Marui VSR-10 series but may also fit VSR-10 clones, though extra modification may be needed for a perfect fit.

If you have worn out your AEGs trigger or you want the mil-spec look to replace your current trigger, this is perfect for you! The G&G Armament Trigger For V2 Gearbox is constructed from alloy with a textured finish and is patterned after the standard curved "Milspec" trigger found on the M4A1 rifle, MK18 MOD.0 and MOD.1, along with most other M4/AR-15 rifles used in military service in the real world.

The trigger is compatible with version 2 gearboxes which are found in the vast majority of M4/AR-15 AEGs. This means that the G&G Armament Trigger For V2 Gearbox trigger should work in practically any M4/AR-15 AEG but will require the gearbox to be opened for installation.

If you're thinking of making a gearbox from scratch or you've had a disaster with your current anti-reversal latch or ARL spring, the VFC Anti Reversal Latch For V2 Gearbox will sort you out! This set includes a steel ARL and spring steel ARL spring, making this ideal for upgraded AEGs with strengthened gearsets.

The anti-reversal latch in your airsoft electric gun is responsible for preventing reverse motion of the gears, which could cause damage to your piston and gears if it happens during a cycle of the gearbox.

This Anti-reversal latch set is intended for version 2 gearboxes and is a great spare or repair to have in your toolbox for those who like a bit of DIY when their AEGs stop cooperating. If you've lost that awkward little ARL spring, this set offers an easy route to replacing it for relatively cheap too!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the  Vector Optics Picatinny Rail Section for KeyMod; 124mm is what you need! This 20mm rail section is constructed from Aluminium and has 124mm of available rail space, so you can mount your mission essentials anywhere. This rail has a sleek skeletonised look, with weight-reducing cutouts and less angled corners, keeping your rail slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the Vector Optics Picatinny Rail Section for KeyMod; 124mm is ideal. KeyMod is cool but you can't go wrong with some extra 20mm Picatinny rail space!

If you want to ramp up your semi-auto speed and you run a G&G, you need this! The Airtech Studios STC™ Speed Trigger Converter for G&G AEGs is designed to reduce trigger travel to a hair, allowing you to seriously spam semi in the most efficient way possible.

The STC is designed to fit a wide range of G&G AEGs (full compatibility list on Airtech Studios Website) and makes use of your original trigger, reducing trigger travel by 80%! This set will require opening the gearbox to install so we don't recommend it for newcomers. If you're a CQB player needing an edge, this will do it!

The G&G Armament G2 Tappet Plate For V2 AEG is a reinforced AEG Tappet Plate for use with version 2 gearboxes. It is specially formulated to be strong yet flexible enough to bend slightly. The plate is constructed from extremely lightweight polymer and is designed to be attached to the air nozzle and sector gear. This process controls the feeding of BBs from the magazine into the hop up chamber.

It is compatible with almost every Version 2 gearbox on the market and comes with only the tappet plate.

If you've had motor issues and need a cheap replacement, here you go! The VFC Long Shaft Ferrite Motor is a standard-speed long shaft motor for M4/AR-15, SMG-5 (not K), G3 and P90 AEGs. The set includes a pre-installed O-type pinion gear and pinion spring, both of which are pre-installed on the shaft.

If you want to make your AK a little more... AK. Then the LCT AK104 Flash Hider is for you! This flash hider is a replica of the real steel AK104 trumpet-style flash hider. It attaches to 24mm CW threading and is constructed from steel, giving it a hefty weight and a realistic feel. It has a wear-resistant finish and its sturdy construction ensures that it will survive more than its fair share of skirmish-related bumps.

To fit this flash hider on more common threads you will need a 24mm to 14mm thread adapter. Give your AK the classic look with a real steel-styled flash hider and keep your AK in the 20th century, right where it belongs.

If you're looking for an easy way to carry a lot more ammo, the Delta Armory 50rnd Extended Magazine for P-Series GBB Pistols has you covered! This magazine is constructed from a heavyweight alloy with a steel feed spring and polymer feed lips. The base plate can easily be removed, making maintenance and repairs a breeze. On the rear of the magazine, we can find some markings that count up to 31, presumably a nod to real steel extended pistol magazines.

This double-stacked magazine holds a whopping 50 BBs, which can be loaded either at the top or front, using a speedloader. To fill the gas, there is a fill valve located on the bottom, recessed into the magazine. Due to the magazine being larger than a regular pistol mag, it takes longer to cool down when shooting so you'll get more shots at full power before noticing a dip.

Compatibility-wise, this magazine is designed for the Delta Armory P-series pistols but should fit most EU-style pistols, including the Tokyo Marui EU pistol and the Umarex Glock. If you're looking for extra BBs to dominate with your sidearm, the Delta Armory 50rnd Extended Green Gas Magazine for P-Series GBB Pistol is for you!

If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!

Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!

Lee Enfield fans, this is another one to add to your collection! The S&T Lee Enfield No.4 MK.I is constructed entirely from metal and luxurious real wood, just like the real thing. It has a phenomenal amount of detail paid in its construction, a near-perfect replica of the early wartime No.4 variant, the Rifle No.4 MK.I, which was supplied to the British, Canadian and other allied troops during the early years of WWII.

Most of the metal parts are durable alloys, granting strength and realistic weight and heft, and the wood finish on the stock is gorgeous, looking slightly nicer than a real No.4 MK.I with its deep woodgrain and consistent finish. Whether you want a Lee Enfield for WWII reenactment, skirmishing, or you simply want a wall hanger as a centrepiece for your man cave, the S&T Lee Enfield No.4 MK.I Bolt Action Airsoft Rifle is a must-have for Lee Enfield fans!

Built on the bedrock of 21 highly successful previous Bolster Armouries releases, the AEGIS Advanced M4 AEG is Bolster's first foray into high-end military-style replicas. The AEGIS marries the peak performance and phenomenal effect on target provided by the ONYX series with a new external form patterned after a highly advanced real steel AR-15 rifle every British Military buff should instantly recognise.

Starting with the G&G SR15 E3 AEG, a licenced replica of the Knights Armament Company SR15 with superb quality core parts, the AEGIS is styled to closely replicate the latest service rifle of the British Armed Forces, the L403A1 aka the KS-1 Rifle. The real steel KS-1 is currently in the trials and development stage and the Airsoft market doesn't yet cater for those who want to build one in AEG form. If you want to be one of the first in the country rocking a KS-1 AEG, here is your chance.

With a very limited pool of appropriate external parts available, replicating the KS-1 was Bolster's biggest challenge yet. A custom 13.7-inch dimpled outer barrel was commissioned and paired with the Airsoft Artisan L403A1/KS-1 URX 6 M-LOK Handguard, the Angry Gun QDC/MCQ-PRT suppressor, an authentic Magpul CTR stock and the universally-loved PTS Syndicate EPG pistol grip. The result is as close to a real KS-1 as you'll get using AEG parts, ideal for the Milsim-oriented skirmisher who likes to lead the pack!

As is the standard set by Bolster Armouries, almost none of the G&G internal parts remain; everything found to be suboptimal has been removed and replaced with the very best aftermarket upgrades available. Parts from Laylax Prometheus, Warhead Industries, RetroArms, FPS Soltair, Gate Electronics along with other big names in the high-end Airsoft aftermarket feature inside, and the result is every bit as impressive as previous game-changing Bolsters. Despite its Milsim leaning, the AEGIS discretely telegraphs its upgraded internals thanks to its unique Gate NOVA CNC trigger finished in Bolster Armouries Violet.

While sourcing the right upgrade parts is one thing; installation, fine-tuning and R&D are a different story. With Bolster Armouries, you can shoot with confidence, knowing your primary was assembled and tuned by talented and proven techs who take pride in their work and simply will not let anything less than perfection leave the workbench.

Affirming the team’s confidence in its builds, the Bolster Armouries Dedicated After-sales Service Programme supplied with each Bolster AEG has you covered for 24 months from the date of purchase, meaning the unparalleled performance of the AEGIS when it hits the sand will be maintained in the long term.

If your mock bolt has become damaged or the paint has started to wear off, you should get a new one! The Delta Armory Metal Mock Bolt For M4/AR-15 AEG is a replacement piece constructed from steel. It will fit on most common Airsoft M4/AR-15 AEGs, allowing you to smarten up your rifle receivers with brand-new shiny parts.

Don't let your mock bolt ruin your AEG's pristine aesthetic, get the Delta Armory Metal Mock Bolt For M4/AR-15 AEG so it can be shiny and brand new again!

If you're in need of an RMR mounting plate for your Army Armament STACCATO pistol, then you've come to the right place! This plate is the perfect accessory for those wanting to mount a red dot sight to their pistol for some extra accuracy whilst out on the battlefield. It is constructed from aluminium and comes with the necessary steel mounting screws to attach this plate to your pistol.

It is compatible with red dot sights that have an RMR footprint, such as the PCS Miniature Red Dot Reflex Sight. If you're looking for a replacement RMR plate, or you need one to mount your desired red dot, the Army Armament Staccato RMR Mounting Plate is perfect for you.

The VFC Tappet Plate For V2 Gearbox is designed for use with version 2 gearboxes. It is specially constructed with reinforced polymer to be strong yet flexible enough to bend slightly. The plate is extremely lightweight and is designed to be attached to the air nozzle and sector gear inside your Airsoft rifle. This process controls the feeding of BBs from the magazine into the hop-up chamber so they can be shot.

It is compatible with almost every Version 2 gearbox on the market and comes with only the tappet plate. If your primary is having issues and you need a Tappet Plate for repair, the VFC Tappet Plate For V2 Gearbox has you covered!

If you need a rifle mag pouch which fits your bigger DMR magazines and such, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M14 mags to G3 and SCAR-H magazines. It is uncertain if 417 magazines will fit in this pouch.

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring numerous rigs, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is the pouch you need!

If you need a rifle mag pouch which fits your bigger DMR magazines and such, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M14 mags to G3 and SCAR-H magazines. It is uncertain if 417 magazines will fit in this pouch.

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring numerous rigs, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is the pouch you need!

If you need a rifle mag pouch which fits your bigger DMR magazines and such, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M14 mags to G3 and SCAR-H magazines. It is uncertain if 417 magazines will fit in this pouch.

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring numerous rigs, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is the pouch you need!

If you've dropped your SigAir 100rnd Mid-Cap Magazine and now the baseplate is damaged, then you're in luck! The VFC SigAir Polymer MPX AEG Replacement Magazine Baseplate fits only these magazines and comes with a steel screw so you can instantly replace your broken or marked baseplates. It is only compatible with these magazines and will not fit on other magazines.

The baseplate features SigAir trademarks on the bottom, we imagine nobody is really going to notice these, but when you reload your MPX John Wick style, your teammates and foes alike may catch a glimpse of the trademarks when you get your own cinematic slow-motion shot.