New Airsoft Guns & Products

If you like the styling of real steel holographic sights, the T-Eagle Holo MOD.VI Red Dot Sight for 20mm RIS / RAS is one to watch. Patterned after the real steel 551 holographic sight, the Holo MOD.VI is a mid-sized red dot sight, ideal for smaller platforms which struggle with limited rail space. Boasting an integral 20mm Picatinny rail mount, red and green reticle illumination with 5 brightness levels for each colour, the Holo MOD.VI provides the same superb utility as larger holographic-style sights without wasting so much space on your primary. 

Benefitting from a strong alloy hood protecting the delicate internals, this holographic sight design is often credited with being one of the more robust red dot designs on the market, insulating you against accidental bumps and scrapes, unlike other "open" red dot designs. If you're an aggressive, or dare we say it, clumsy skirmisher, this could save you some anguish! If you're looking for a compact holographic-style red dot optic for your SMG-5, AR-9 or other compact SMG, this is the one to go for!

If you're looking for a fantastic value complete uniform in an attractive modern cut, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is a fine choice. A complete set inspired by a famous real-world Gen.3 combat uniform, the 8Fields Tactical version includes a UBACS style combat shirt, combat trousers and knee pads with an expansive range of flat colour and camouflage colour options to choose from!

The body of the shirt is 100% sweat-wicking cotton, intended to help you stay cool while wearing body armour or a plate carrier, and each sleeve features a velcro-secured admin pocket with additional velcro on the outside for I.D or morale patches. On each sleeve, the Combat Shirt is equipped with elbow pad pockets so you can add elbow pads to keep you protected when crawling. The collar is equipped with a zip, so you have the choice of zipping up to protect your throat or unzipping for improved airflow and cooling.

The combat trousers are constructed from a 65% polyester 35% cotton mix and are littered with considerately designed pockets. On each leg, we have a large cargo pocket, a thigh pocket, the usual angled trouser pocket and a lower leg pocket. The ride height of the knee pads can also be adjusted via bungee cord concealed inside the thigh pockets, meaning you will never feel the pain of kneeling on a thorn in the woods or a BB in CQB. Trust us, it hurts! 

Sizing-wise, please refer to the size charts in the product images to ensure you get a proper fit. At a far cheaper pricepoint than equivalent Gen.3 combats with no quality compromises, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is ideal for veteran skirmishers needing a fresh new loadout or new skirmishers seeking the elite look!

If you're looking for a fantastic value complete uniform in an attractive modern cut, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is a fine choice. A complete set inspired by a famous real-world Gen.3 combat uniform, the 8Fields Tactical version includes a UBACS style combat shirt, combat trousers and knee pads with an expansive range of flat colour and camouflage colour options to choose from!

The body of the shirt is 100% sweat-wicking cotton, intended to help you stay cool while wearing body armour or a plate carrier, and each sleeve features a velcro-secured admin pocket with additional velcro on the outside for I.D or morale patches. On each sleeve, the Combat Shirt is equipped with elbow pad pockets so you can add elbow pads to keep you protected when crawling. The collar is equipped with a zip, so you have the choice of zipping up to protect your throat or unzipping for improved airflow and cooling.

The combat trousers are constructed from a 65% polyester 35% cotton mix and are littered with considerately designed pockets. On each leg, we have a large cargo pocket, a thigh pocket, the usual angled trouser pocket and a lower leg pocket. The ride height of the knee pads can also be adjusted via bungee cord concealed inside the thigh pockets, meaning you will never feel the pain of kneeling on a thorn in the woods or a BB in CQB. Trust us, it hurts! 

Sizing-wise, please refer to the size charts in the product images to ensure you get a proper fit. At a far cheaper pricepoint than equivalent Gen.3 combats with no quality compromises, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is ideal for veteran skirmishers needing a fresh new loadout or new skirmishers seeking the elite look!

If you're looking for a fantastic value complete uniform in an attractive modern cut, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is a fine choice. A complete set inspired by a famous real-world Gen.3 combat uniform, the 8Fields Tactical version includes a UBACS style combat shirt, combat trousers and knee pads with an expansive range of flat colour and camouflage colour options to choose from!

The body of the shirt is 100% sweat-wicking cotton, intended to help you stay cool while wearing body armour or a plate carrier, and each sleeve features a velcro-secured admin pocket with additional velcro on the outside for I.D or morale patches. On each sleeve, the Combat Shirt is equipped with elbow pad pockets so you can add elbow pads to keep you protected when crawling. The collar is equipped with a zip, so you have the choice of zipping up to protect your throat or unzipping for improved airflow and cooling.

The combat trousers are constructed from a 65% polyester 35% cotton mix and are littered with considerately designed pockets. On each leg, we have a large cargo pocket, a thigh pocket, the usual angled trouser pocket and a lower leg pocket. The ride height of the knee pads can also be adjusted via bungee cord concealed inside the thigh pockets, meaning you will never feel the pain of kneeling on a thorn in the woods or a BB in CQB. Trust us, it hurts! 

Sizing-wise, please refer to the size charts in the product images to ensure you get a proper fit. At a far cheaper pricepoint than equivalent Gen.3 combats with no quality compromises, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is ideal for veteran skirmishers needing a fresh new loadout or new skirmishers seeking the elite look!

If you're looking for a fantastic value complete uniform in an attractive modern cut, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is a fine choice. A complete set inspired by a famous real-world Gen.3 combat uniform, the 8Fields Tactical version includes a UBACS style combat shirt, combat trousers and knee pads with an expansive range of flat colour and camouflage colour options to choose from!

The body of the shirt is 100% sweat-wicking cotton, intended to help you stay cool while wearing body armour or a plate carrier, and each sleeve features a velcro-secured admin pocket with additional velcro on the outside for I.D or morale patches. On each sleeve, the Combat Shirt is equipped with elbow pad pockets so you can add elbow pads to keep you protected when crawling. The collar is equipped with a zip, so you have the choice of zipping up to protect your throat or unzipping for improved airflow and cooling.

The combat trousers are constructed from a 65% polyester 35% cotton mix and are littered with considerately designed pockets. On each leg, we have a large cargo pocket, a thigh pocket, the usual angled trouser pocket and a lower leg pocket. The ride height of the knee pads can also be adjusted via bungee cord concealed inside the thigh pockets, meaning you will never feel the pain of kneeling on a thorn in the woods or a BB in CQB. Trust us, it hurts! 

Sizing-wise, please refer to the size charts in the product images to ensure you get a proper fit. At a far cheaper pricepoint than equivalent Gen.3 combats with no quality compromises, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is ideal for veteran skirmishers needing a fresh new loadout or new skirmishers seeking the elite look!

If you're looking for a fantastic value complete uniform in an attractive modern cut, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is a fine choice. A complete set inspired by a famous real-world Gen.3 combat uniform, the 8Fields Tactical version includes a UBACS style combat shirt, combat trousers and knee pads with an expansive range of flat colour and camouflage colour options to choose from!

The body of the shirt is 100% sweat-wicking cotton, intended to help you stay cool while wearing body armour or a plate carrier, and each sleeve features a velcro-secured admin pocket with additional velcro on the outside for I.D or morale patches. On each sleeve, the Combat Shirt is equipped with elbow pad pockets so you can add elbow pads to keep you protected when crawling. The collar is equipped with a zip, so you have the choice of zipping up to protect your throat or unzipping for improved airflow and cooling.

The combat trousers are constructed from a 65% polyester 35% cotton mix and are littered with considerately designed pockets. On each leg, we have a large cargo pocket, a thigh pocket, the usual angled trouser pocket and a lower leg pocket. The ride height of the knee pads can also be adjusted via bungee cord concealed inside the thigh pockets, meaning you will never feel the pain of kneeling on a thorn in the woods or a BB in CQB. Trust us, it hurts! 

Sizing-wise, please refer to the size charts in the product images to ensure you get a proper fit. At a far cheaper pricepoint than equivalent Gen.3 combats with no quality compromises, the 8Fields Tactical Army Combat Uniform Gen.3 with Knee Pads is ideal for veteran skirmishers needing a fresh new loadout or new skirmishers seeking the elite look!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

If you're planning on running your GBBR through winter or fancy mag dumping like it's going out of fashion without the dreaded "cooldown" effect, the Army Armament HPA P30 Adapter for M4/AR-15 AEG Magazines; CGS/MWS System is what you need! 

A collaborative project between Army Armament and T8 Systems, this HPA adapter is designed for the Tokyo Marui M4/AR-15 ZET System and the CYMA CGS M4/AR-15 GBBR series, allowing standard AEG mags to be used along with a High Pressure Air (HPA) power source. The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. 

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're already running HPA you probably have all the bits to make this work already and experience shoulder-thumping recoil through the frosty months!

If you're looking for an easy way to carry a couple of extra pistol magazines, you're in luck! The Amomax Universal Polymer Pouch For Pistol Magazines fits the most common 9mm, .40 and .45 style magazines. This includes common magazines like Hi-Capa and EU series.

Simply slide your magazines in the holsters and the polymer retention system will keep them secure. If you're struggling to insert or remove magazines, there is a toolless screw in the centre of the holster that allows you to tighten or loosen the width of the magazine insert area.

The holster attaches to belts using the paddle back, however, this can be removed using an Allen key and you can set the Amomax Universal Polymer Pouch For Pistol Magazines up in a drop leg holster or attach it to some MOLLE on a chest rig. Carry your pistol magazines in style with a retention holster and carry your magazines onto the battlefield with ease.

The Jing Gong 100rnd P90 Mid-Cap Magazine is transparent, allowing you to constantly monitor your remaining BBs so you don't get ambushed whilst having an empty magazine! This magazine fits perfectly into the CM.060, giving you smooth reloads even in the heat of the battle when the adrenaline is pumping!

It is made from a strong polymer and sturdy steel feed spring making it a mighty fine magazine that will last you a long time. This magazine can hold approximately 100 BBs so you have plenty of shots available if you opt for semi-auto firing, but if you prefer full spraying, this large magazine will surely have enough BBs in it so you can hit your target, or at least we would hope so...

If you need more firepower without extra length, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty is ideal. Based on the real steel M203 grenade launcher used by Arnie in Predator and serving with the US Army from the late Vietnam War right up until the present day, this M203 is the "Super Shorty" version, even shorter than the "Short" version and ideal for compact SMGs and short-barrelled rifles. The pre-installed mount is a QD example for 20mm Picatinny rails, meaning you can quickly mount it and remove it in seconds depending on the situation at hand.

Like other Airsoft M203s, the A&K Super Shorty uses 40mm MOSCART grenades as a power source and will require at least 1 grenade to function. Most MOSCARTs work like a giant shotgun, sending between 18 and 140 BBs downrange with a single pull of the trigger with a game-dominating spread, though specialised MOSCARTs which shoot different payloads are available. If you want to give your primary a more aggressive look with a firepower increase as a bonus, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty will give you what you need!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

If you have a Hi-Capa-shaped hole in your heart and are seeking a realistic experience, the EMG R611-3 STACCATO 2011 Hi-Capa P GBB is what you need. This full-metal Hi-Capa platform is a perfect replica of the real steel STI/STACCATO Firearms 2011 P, complete with licensed trademarks across the design in engraved, laser engraved and embossed form, very fancy.

As one might expect with such a high-end real steel pedigree, the STACCATO is kitted out externally with a raised light-enhancing front sight paired with an anti-glare rear sight, a red dot mounting plate for RMR footprint red dot sights, a flared magazine well and slide serrations at both the front and rear. From a handling standpoint, this thing is top-tier!

Internally, the STACCATO P is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. If you'd love to run a Hi-Capa with premium styling and stand out from the crowd, the R611-3 STACCATO 2011 Hi-Capa P GBB from EMG belongs in your loadout!

If you're a fan of real steel pistols then surely the STACCATO C2 frame has you interested! This compact, cutting-edge Hi-Capa 3.8 looks like a real premium sidearm. Boasting full metal construction with licensed STACCATO trademarks and its aggressive hand-stippled grip, this pistol looks elite and will make your friends and foes jealous of your sexy sidearm.

Externally, the STACCATO C2 is equipped with an optics-ready slide with an RMR footprint red dot mount plate pre-installed, a light enhancing front iron sight paired with an anti-glare rear sight, forward slide serrations and an undercut trigger guard, providing everything a modern Hi-Capa needs to compete with the best on the field.

Inside, this upgraded STACCATO C2 features the same 6.03mm tightbore inner barrel, redesigned nozzle made of cold-resistant polymer, and a magazine valve that maximises gas efficiency and reliability. But now, the upgraded version has steel components in key areas that are most likely to suffer from wear and tear. This includes the hammer assembly and recoil spring guide. If you're seeking a sidearm with no performance compromises, the EMG R612A STACCATO 2011 Hi-Capa C2 GBB; Upgraded Version is for you!

If you're running one of the newer G&G platforms with the G&G rotary HOP-up, check this out! The Airtech Studios TDC Conversion Set for G&G Rotary HOP-up Unit is intended to provide maximum performance from your original G&G rotary HOP-up unit. Designed specifically for the latest G&G rotary HOP-up design, this kit includes an enhanced HOP-up arm, TDC trolley, 2 x M-nubs and a centring unit.

The benefits of a TDC HOP-up unit include a stronger HOP-up effect and less chance of side-to-side shot deviation when using heavy BBs at high FPS. This part will require modification to your original outer barrel to fit, but thankfully these mods are quite easy and thoroughly explained on the Airtech Studios website. If you want your G&G Rotary-equipped AEG to reach out and touch the enemy at crazy ranges, this TDC Conversion Set is what you need!

The G&G Armament G2 21.20MM Aluminium Nozzle For AEG is an excellent replacement piece for your Airsoft AEG. It is constructed from aluminium which improves performance and consistency, plus, it is durable and has a longer lifespan compared to polymer nozzles.

If you're building a gearbox from scratch or have some repairs to carry out, the G&G Armament G2 21.20MM Aluminium Nozzle For AEG is a handy spare to have around just in case. Compatibility-wise, this nozzle is designed for version 2 gearbox-equipped M4/AR-15 AEGs and has an overall length of 21.20mm.

The Delta Armory EGL/EAGLE Stock for M4/AR-15 features a slimline design which is unique to some of the latest releases from Delta Armory. It features a QD sling socket on either side, a low-profile adjustment lever on the bottom together with conventional "footman loops", aka sling slots.

The highlight of this stock is its rubber butt plate featuring lattice checkering and an angled section at the toe for providing grip in the most modern shooting stances, with or without body armour. It's the perfect low-profile stock for any skirmisher who hates snagging the back of their rifle on the surroundings!

If you're in search of a low-cost red dot sight with a military-style look, the T-Eagle Holo Mod.2 Red Dot Sight for 20mm RIS / RAS is exactly that. Based on a well-known real steel "holographic" style sight, the Holo Mod.2 offers an illuminated ringed cross reticle which glows either green or red depending on your selection and is fully adjustable for windage and elevation. 

The Holo Mod.2 is designed with a strong alloy hood to protect it from bumps and scrapes, making it ideal for fast-moving skirmishers. The Holo Mod.2 is ready to mount via its integral 20mm Picatinny mount and sits at the same height as a standard M4/AR-15 front sight, making it comfortable to view through on basically any Airsoft platform, though if you use a full-face mask you may need a riser. If you're looking for a strong red dot sight design with a militant aesthetic, the T-Eagle Holo Mod.2 is ideal

If you like your rifle looking like a real steel rifle then you need this! The G&G Armament Knights Armament URX4 13'' Handguard is a replica of a real steel handguard but much more affordable and designed specifically for Airsoft. It is constructed from superb CNC aluminium with a flawless finish, guaranteeing perfect in-spec attachment. A tremendous handguard designed for those who like to keep their platforms looking stylish and effective.

This handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories in the perfect position. The handguard also comes equipped with steel QD points at the receiver side. This is perfect for those who like to sling their rifles or use other QD attachments.

With this muzzle device you can keep your AEG looking like the real thing! The VFC Bird Cage Flash Hider replicates the real M4 muzzle brake seen on service rifles and is constructed from steel with 14mm CCW threading. Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake it will give your Airsoft rifle a modern, iconic look.

Its steel construction and black finish are sure to withstand most bumps and scrapes on the battlefield, making it the perfect way to keep your outer barrel and precious inner barrel safe from damage.

If you need to carry some extra mags into battle you need this! The FMA Kydex Double Holster for Pistol Magazines fits the most common 9mm and other small magazines. This includes magazines for pistols such as EU/GLOCK, CZ P-09, B9 and F226.

Slide your magazines in the holsters and the polymer retention system will keep them secure. If you're struggling to insert or remove magazines, there is a Phillips head screw in the centre of the holster that can be adjusted to tighten or loosen the magazine insert area.

The holster attaches to belts using the paddle back, it fits on belts with a 2" width or less, meaning it should fit on most common tactical belts. With the FMA Kydex Double Holster for Pistol Magazines you can carry your pistol magazines easily and with style, just make sure to bring enough for the battlefield!

If you're in search of a lightweight rifle that doesn't compromise on style then you're in luck! The Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG is constructed almost entirely from polymer, making it perfect for new skirmishers or veterans looking for something easier on the arms. This version is SA-F09 Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high-density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best-value AEG platforms on the market. Whether you're a new skirmisher looking for a long rifle shape with more features than the average or a veteran looking for some precision with a lightweight DMR-type, the Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG will be an asset to you!

If you're in search of a lightweight rifle that doesn't compromise on style then you're in luck! The Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG is constructed almost entirely from polymer, making it perfect for new skirmishers or veterans looking for something easier on the arms. This version is SA-F09 Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high-density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best-value AEG platforms on the market. Whether you're a new skirmisher looking for a long rifle shape with more features than the average or a veteran looking for some precision with a lightweight DMR-type, the Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG will be an asset to you!

If you want to take your S&T Nambu Type 100/40 Submachine Gun AEG out on the skirmish field, you're going to need some spare magazines! This magazine has a durable steel shell and reliable feeding spring, ensuring that this magazine with survive anything a skirmish has to throw at you. Its 110rnd capacity is plenty enough for any skirmisher who plays close-quarters whilst out on the battlefield.

The mid-cap design means that you don't need to wind this magazine at all and it will feed until it's empty, this allows for faster reloads and complete uninterrupted play until the magazine is empty. The curved design allows for a better grip on the magazine whilst reloading and whilst holding the magazine during firing.

Keep your Nambu Type 100/40 Submachine Gun AEG well fed whilst out on the battlefield with an extra 110rnd for every magazine, exactly what you need to skirmish your WW2 loadout effectively!

This classic pistol needs no introductions, the iconic 1911 sidearm has been around since the start and the fact it's still here today, well, that says it all really. The WE Europe M1911 GBB Pistol; CO2 Version is just as amazing as the original WE 1911 except now, it comes with a CO2 magazine, making it effective for all weather conditions.

A CO2 magazine not only improves this pistol's cold weather performance, but it also improves the power of this pistol and gives it a thunderous recoil, just like the real thing. If you're looking for a sidearm to aid you during the winter months, or you're interested in having a powerful pistol with a realistic feel, the WE Europe M1911 GBB Pistol; CO2 Version is the perfect choice for you!

If you love your Russian platforms but are not stuck in the past, the CYMA CM.039C AK-47 Tactical AEG Rifle should definitely interest you. This beast is constructed using a lot of steel components to help provide an extremely realistic weight. It comes equipped with a foldable foregrip, so you can take down your opponents with precise handling whilst on the battlefield.

Inside, you'll find a 6.03mm tightbore inner barrel which provides some extra power and accuracy when sending BBs down range. The gearbox is a version 3 fitted with 18:1 steel gears running on 8mm ball bearing bushings, a tried and trusted formula guaranteeing consistency. If you're searching for an ultra-modern tactical AK replica to live out your tactical fantasies, the CYMA CM.039C AK-47 Tactical AEG Rifle is one to watch!