- Limited Edition
- Electronic Trigger
- Quick Change Spring
The KRYTAC Kriss Vector is back in business in a gorgeous Limited Edition Alpine finish. Featuring a new MK5 Modular Rail, E-Trigger, Quick Change Spring, Rotary HOP Unit, 30K High Torque Motor, Padded Cylinder Head and much much more, the best just got even better.
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
Airsoft's hottest SMG just made a ferocious comeback with a Limited Edition run of gorgeous Alpine White KRISS Vectors, which are more than just a fancy lick of paint, and include a world of goodies inside to refine the platform and make the KRISS Vector the best it can possibly be.
The outer shell is constructed to a fantastic standard using Reinforced Fibre Polymers for the Upper & Lower Receiver, as well as the Pistol Grip and Stock. The Handguard is a Hard Anodised Aluminium M-LOK design which comes complete with 20mm Rail Pieces already installed for you to start adding accessories out of the box. The Outer Barrel Assembly has been extended to accommodate the new Handguard, and also features a 14mm CCW Thread underneath the Flash Hider for the installation of Suppressors, Tracer Units and other Muzzle Devices (be sure to remove the Grub Screw from the Flash Hider before removing). The top of the Receiver is 20mm railed as you would expect, and comes with a set of Flip Up Ironsights in the box ready to install. The Sliding Stock at the rear makes for a very adaptable platform which can be comfortable outdoors and inside thanks to the six positions it can be set to. The stock also features QD Sling Sockets for the installation of Quick Release Sling Loops. The Fire Controls are ambidextrous as per the older model, making this a very friendly platform for Left Handed Players. The Battery is housed inside the Pistol Grip, where you will find a Deans connector. A Deans to Mini Tamiya Converter Lead is included should you not have a Battery on Deans. A Rotary HOP Unit applies backspin to your BBs as they leave the barrel and can be adjusted inside the Dust Cover of the replica, which can be opened by pulling the Charging Handle.
Internally the KRISS Vector features a wealth of up-rated goodies to bring the replica to a mind-blowing spec. Every aspect has been thought through, from the enclosed HOP Unit to ensure maximum air seal, to the precision Gearbox housing which ensures perfect meshing between the Pinion and Bevel gear. The KRISS Vector has an integrated MOSFET which allows for the Two Round Burst function that is typical of the real gun, and protects the circuitry of the replica at the same time. The Trigger is an electronic design which makes for a rapid Trigger Response and much longer life span over traditional Trigger Contacts. Other internal goodies include a Quick Change Spring, Padded Cylinder Head, Relief Cut Cylinder Window, Temperature and Wear Resistant Bucking, 30K Neodymium High Torque Short Motor, and a 6.05mm Inner Barrel.
Included in the box is a 95rnd Long Mid Cap Magazine, as well as a 50rnd Short Mid Cap Magazine. Also included are a set of Flip Up Ironsights, an Extended Battery Cap to give you more room in the Battery Compartment, a Deans to Mini Tamiya Converter Lead and a Certificate of Authenticity. If you're looking for hardcore quality inside and out, or are a fan of the KRISS Vector platform, then there really is no other way to go than the Krytac KRISS Vector Alpine Limited Edition.
Features
- Limited Edition
- 1 of 3000 Units
- MK5 Modular Rail
- Quick Change Spring
- M-LOK/RIS Combo Handguard
- Extended Outer Barrel
- 14mm CCW Thread
- Flip-Up Ironsights
- Extended Battery Cap
- Ambidextrous Fire Selector
- GEN II Pivoting Trigger
- Safe/Semi/2rnd Burst/Auto
- 8mm Gearbox
- Integrated KRYTAC MOSFET
- Padded Cylinder Head
- Relief Cut Cylinder Window
- Rotary HOP Unit
- Temperature/Wear Resistant Bucking
- 30K Neodymium Magnet High Torque Motor
- Long & Short Magazine Included
- Reinforced Piston
- Sliding Stock
- QD Sling Sockets
- Rubber Butt Pad
- Deans Connector
- Deans to Tamiya Converter Lead Included
- 155mm 6.05mm Inner Barrel
Package Includes
- KRYTAC KRISS Vector Alpine Limited Edition
- 95rnd Mid Cap Magazine
- 50rnd Mid Cap Magazine
- Flip-Up Ironsight Set
- Deans to Tamiya Converter Lead
- Extended Battery Cap
- Certificate of Authenticity
Specification
General
|
Submachine Gun
|
---|---|
|
Yes
|
|
Yes,
No,
|
|
Approx. 337fps ± 10%, using 0.20g BB
|
|
Yes
|
|
Yes
|
|
|
|
Regular Player, Experienced Player,
|
|
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area
|
Weight and Dimension
|
Approx. 2.78kg
|
---|---|
|
68cm
|
|
77cm
|
Construction
|
White
|
---|---|
|
Black
|
|
No
|
|
Polymer upper & lower receiver, pistol grip and stock. Alloy handguard, outer barrel, buffer tube and trim.
|
|
Polymer
Alloy
|
|
Polymer
Alloy
|
Weapon Specific
|
Electric
|
---|---|
|
None
|
|
Vector
|
|
Vector
|
|
Safe
Semi Automatic
Full Automatic
Two Round Burst
|
|
Trigger Lock
|
|
Right Handed
|
|
Standard
|
|
1:1
|
|
0.25g
|
Hop-Up
|
Yes
|
---|---|
|
Rotary
|
|
Inside dust cover (charging handle opens flap)
|
Furniture
|
|
---|---|
|
20mm RIS / RAS , MLOK Rail System,
|
|
Sliding
|
|
6 Position
|
|
Iron Sights
|
|
QD
|
Barrel
|
Male
|
---|---|
|
CCW (Counter Clockwise)
|
|
14mm
|
|
6.05mm
|
|
155mm
|
Magazine Specific
|
Medium Capacity , AEG,
|
---|---|
|
Approx. 95 Rounds
|
|
Speed Loader
|
|
Top
|
Electric Gun Specific Information
Gearbox
|
Yes
|
---|---|
|
Yes
|
Battery Specific
|
Deans ,
Deans To Mini Tamiya Adaptor,
|
---|
Compatible Battery
|
Li-Po
|
---|---|
|
Stick
|
|
7.4v
|
Product Testing Data
|
337FPS
|
---|---|
|
ASG Blaster 0.20g BBs
|
|
13/12/19
|
Detailed Power Tests
FPS
FPS, using 0.25g BB
|
Approx. 337fps, using 0.25g BB
|
---|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |