Jing Gong JG101 T3 RIS AEG Assault Rifle

Introducing the T3 RIS from JG, a solid performing AEG assault rifle with a polymer body, keeping the rifle light, wieldy, and affordable. Based on the real G3 battle rifle, this is a big boy, with a large 7.62 style high capacity magazine holding a whopping 500 rounds! Equipped with a solid stock providing plenty of battery space, this is a great platform for outdoor skirmishes.

Starting at the tip we find the alloy G3 style flash hider which threads onto the 14mm CCW male threads at the tip of the alloy outer barrel. The barrel on the T3 RIS is long, housing a lengthy 470mm inner barrel within, making this a great platform to accurize with loads of potential to reach out and touch the enemy team. As we move rearward we come across the front sight, which is made from alloy and is a fully hooded design, protecting it from damage. Integral to the front sight block we can find a sling loop, mounted to the left side of the sight block. Behind this, we can see the pin which retains the RIS handguard; simply push the pin through from the right side to remove the handguard. The handguard is entirely constructed from aluminium with alloy mounting parts and provides 29 slots of Picatinny rail on the sides and 30 slots along the bottom - plenty of space for vertical foregrips, flashlights and lasers should you wish to take advantage of this platforms modularity. Attractive vents machined into the handguard keep the rifle lightweight. Above the handguard lies the polymer cocking tube, within which resides an alloy HK style charging handle, which actuates the mock bolt and allows access to the rotary HOP unit inside the receiver. The charging handle can be locked to access the HOP unit more easily but we do not recommend doing the "HK slap" with this rifle, due to its polymer construction.

The cocking tube leads back to the polymer receiver, which features the ejection port on the right side, and two grooves along either side allowing for use of a sliding stock, though this rifle comes with a fixed solid stock. Atop the receiver, we can find the rear iron sight, which is a rotary drum aperture type sight providing 4 differently sized apertures to aim through depending on the range you are shooting at and the level of precision required.  Between the rear sight and the ejection port there are 4 raised lugs moulded into the receiver, providing a mounting point for G3 and MP5 type receiver rail mounts, should you require an optical sight. The magazine is a "rock and lock" style insertion, allowing the magazine to lock into the rifle reliably with little chance of it falling out. The magazine can be released in two ways; with the ambidextrous "paddle" protruding at the bottom of the receiver ahead of the trigger guard, and with the button release, found on the right side of the receiver above the paddle. The lower receiver/ fire control group is made from polymer, and features an ergonomic pistol grip, providing a solid and comfortable grip for both right and left-handed users. The fire selector, found on the left side, features a textured extension to ensure your thumb can easily move it between modes without slipping off. The stock of the T3 RIS is a fixed polymer stock, providing a large battery compartment with enough space to house a battery that will keep your T3 running all day without changing! The cheek weld the stock provides gives a great view through the iron sights, allowing the sight picture to remain consistent every time the rifle is shouldered, encouraging accuracy. The stock features a sling loop on the left side, which together with the front sling point allows this rifle to use two-point slings. The butt plate is made from rubberized polymer with texturing to ensure the stock of the rifle can be shouldered with confidence that it will not slip off the shoulder.

The internals of the JG T3 RIS are in line with the other rifles in the T3 series; sporting a version 2 gearbox with full AEG compatibility, a rotary drum style HOP unit providing ease of adjustment and less likelihood of losing its setting due to vibration, and a lengthy 470mm 6.08mm inner barrel allowing you to get the most out of the full bore cylinder inside the gearbox. The T3 RIS is perfect for anyone who wants a long rifle, whether for a DMR conversion or just to allow for a bit more reach on the skirmish field.

Features

• Rotary HOP unit
• Picatinny RIS Handguard
• Ergonomic pistol grip
• Rotary drum Diopter rear sight
• Exceptionally long inner barrel
• 500 round high capacity magazine
• Compatible with MP5/G3 receiver rails
• Full stock provides a massive battery compartment
• Alloy outer barrel with 14mm CCW male threads
• Great starting point for a DMR project

Package Includes

• JG T3 RIS AEG Rifle
• 500 round High capacity magazine
• Vertical foregrip
• Instruction manual
• Hi-cap winding key