Airsoft Handguards

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

The Strike handguard also comes with an angled foregrip pre-installed on the 6 o'clock M-LOK slots which can be removed and repositioned wherever you prefer. Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip will do the trick!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

The Strike handguard also comes with an angled foregrip pre-installed on the 6 o'clock M-LOK slots which can be removed and repositioned wherever you prefer. Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip will do the trick!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

If you're working on a classic M4A1 build or you broke your handguards and need cheap replacements, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are ideal. These handguards are constructed from high density polymer with the classic M4A1 ribbed design and a slightly wider profile than XM177 handguards. 

These are two-piece handguards designed to mount to M4/AR-15 delta rings found on M4A1, XM177, CQBR and other classic M4 configurations. If you aren't sure if these handguards are right for your AR, contact us for clarification. Ideal for lightweight builds or the retro aesthetic, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are affordable and functional!

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

If your M4/AR-15 is due a style up, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need! This unique handguard boasts hexagonal vent ports, M-LOK slots at 3, 6, and 9 o'clock and a 20mm Picatinny rail up top, ready for your choice of M-LOK or 20mm Picatinny accessories. The vent ports both look fantastic and reduce weight considerably, giving you a fast-to-point front end and slick external styling. 

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. The HEX handguard also includes the correct barrel nut to mount it, pre-installed inside the handguard and constructed from aluminium. 

As with most M4/AR-15 handguards, you'll need an M4/AR-15 barrel nut wrench to install the HEX but it should fit most M4/AR-15 receivers on the market, AEG or GBB. If you're looking for a fresh look for your AR platform and want more accessory options with less overall weight, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need!

If you are an AK fan but are getting green-eyed over the M4/AR-15's accessory options, a railed handguard will cure that! The CYMA 20mm Picatinny Railed Handguard for AK AEG is constructed from solid high density polymer and provides 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for 20mm Picatinny accessories.

The side rails are short lengths, ideally designed to mount a tactical flashlight or aiming laser but can also be removed if you prefer slick sides on your handguard. The top rail features 12cm of rail space, allowing for a forward mounted red dot sight to be fitted for that slick PMC look. The bottom rail is 11cm long, providing enough room at the front so you can add a vertical or angled foregrip, or even a bipod if you see fit. The sides of the lower handguard also include ribs for extra grip, similarly to the standard issue AK-10x polymer handguards. If you want to mount your mission essential kit to your AK AEG or GBBR this handguard is one of the cheapest ways to do it!

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

Bring your SMG-5 variant into the 21st century and make all the ARP-9 users jealous! The CYMA M-LOK handguard is extremely light, as heavy or less so than a standard polymer handguard. Even with no accessories mounted, this sleek handguard is comfortable to grip and looks very modern, meaning your SMG-5 variant could disappear in a pile of AR15s and even they wouldn't notice the intruder! Looks even more operator when combined with the CYMA Picatinny and M-LOK top rail for SMG-5 or SMG-5K!

Is your SMG-5/MP-5 looking left out amongst its railed-up brethren? Here is the solution! It's all included in the box, a 20mm rail system, 2 rail covers, and a vertical grip to stop those sexy rails from slicing your hands to pieces. Cyma even throw in a metal outer barrel! It is not essential to install the outer barrel to make the rail system compatible but it is nice that it is included!

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear. 

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

If you've lost your mock cleaning rod, your AK will be looking odd! Here's what you need to fix that. The CYMA Mock Cleaning Rod for AK-47/74 AEG is designed for the CYMA CM.04x AK AEG series but should also fit other AKs from other brands which use the LCT or VFC build style. The rod is constructed from steel, and it goes without saying, you should never attempt to use this rod to clean the barrel of your Airsoft gun, it is only for the look!

A replacement Gas Tube for Airsoft AK models, constructed from Alloy to the original specification as a direct replacement. If you own an AK Model and need a replacement Gas Tube or are looking at making Handguard changes, you can't go wrong with a spare.

If you are planning on loading up your Kriss Vector with a full complement of tactical equipment, this will be useful! The Laylax Nitro Vo M-LOK Handguard is intended to provide the Krytac Kriss Vector with additional rail space in the form of both Picatinny and M-LOK, and a longer handguard for use with more modern shooting stances. The handguard is constructed from aluminium using CNC processes to provide a flawless shape and keep the weight low, and is coated in a hard wearing black anodised finish. If you are looking for a way to c-clamp your vector without getting in the way of the charging handle, you need this!

If you are rocking the Sig Air MPX and you are worried your battery will poke out of the handguard, worry no longer, Laylax have an innovative solution! The Handguard Battery Block for MPX AEG is designed to mount to the outer barrel using a grub screw and close the front end of the handguard up to stop your battery from hanging out when the SMG is pointed down. The block is constructed from aluminium with a matt black anodised finish and is styled to look like the gas block of the bigger MCX, meaning it shouldn't detract too much from the realistic looks of the MPX. This is why we love Laylax, they always come up with a nifty solution for these little niggles!

For the AK guys who want to join the rest of us in the 21st century, CYMA has come through! The Modular KeyMod Railed Handguard is constructed from aluminium and includes a smattering of KeyMod 20mm Picatinny rail sections pre-installed, which can be moved around and placed wherever you like. This handguard is particularly interesting as it can be set up in several different configurations, either with or without the included handguard extension section and with the choice of leaving the upper handguard sections on or removing them to lower the weight. 

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

If you like to keep pace with the latest British Army-issued firearms, you must be planning a KS-1/L403A1 build! The Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is the handguard you need to complete it. Constructed from superb quality CNC aluminium with flawlessly crisp matching, this rail is phenomenal quality, as we might expect from Airsoft Artisan. 

The L403A1 handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories perfectly. Also included in the box is a set of outer barrel shims to completely eliminate wobble, allowing the L403A1 handguard to be paired with a wide variety of barrels on PTW, GBBR and AEG M4/AR-15 platforms. If you're working on a KS-1 build and want it to be stitch-perfect, the Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is a must!

If you have plans to style up your AK for 21st century combat the CYMA Aluminium M-LOK Handguard adds M-LOK accessory slots so you can mount the latest and greatest mission essentials and benefit from reduced weight! The set includes an upper handguard with "Grater" style vents and a lower handguard with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions.

Both the upper and lower handguard are constructed from aluminium using CNC machining and are finished with matt black anodising for a smooth and flawless finish. Compatibility-wise, this handguard should fit practically an AK47/74 platform AEG or GBB rifle but will not fit AKS-74U rifles due to their shorter length handguards. Give your AK the PMC or civilian tactical look!

If you are gearing up to spruce up your old AK AEG this might be handy! The Front Handguard Cap with Sling Point from CYMA is an original replacement part for the CM.04x series AKM/AK74 AEG. The part is constructed from alloy and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the CM.04x series but should also work with VFC and LCT AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full size AK handguards only.

A CNC Aluminium Upper Handguard for select LCT LCK (AK) Airsoft Replicas. It offers stunning precision manufacture and a top 20mm Rail for accessories, and is the perfect companion to any Custom Build / Modified AK.

A custom made Handguard for the ASG Scorpion Evo, which is made of the same solid Glass Nylon Fiber as the original furniture and has been designed with comfort and ergonomics in mind; allowing users to effortless achieve a repeatable C-Clamp on the fore-end for consistent aiming.