- 11.1V 3S LiPo
- Deans/T-Plug connector
- 1500mAh Capacity
If you're running an upgraded or MOSFET-equipped AEG, this Gens Ace 11.1v 25C 1500mAh LiPo Battery may be just what you need to power it. This Lithium Polymer (LiPo) battery is pre-wired to a Deans/T-Plug battery connector and consists of 3 cell groups wired in nun-chuck/crane/butterfly configuration. The wire length between the cells and connector is approximately 8cm and each of the 3 cells measures approximately 0.8 x 1.6 x 13 cm.
Not all Airsoft AEGs are capable of running an 11.1V LiPo without causing damage, if you are unsure check the recommended battery section of the your gun's product description. LiPo batteries require balance charging, meaning this battery MUST be charged using a LiPo balance charger with the balance port connected. We recommend using a battery charging bag for storage and charging, and to never leave an Airsoft battery on charge while unattended.
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Charge this battery the right way...
Description
Features
- Lithium Polymer
- 1500mAh Capacity
- 25C Discharge rating
- 8cm Wire Length
- Deans/T-Plug battery connector
- Crane/nun-chuck configuration
- Battery charging bag recommended
Package Includes
- Gens Ace 11.1v 25C 1500mAh LiPo Battery
Specification
General
|
Parts & Accessories Type
|
Battery
|
|---|---|
|
Product Length
|
Approx. 13cm
|
|
Product Height
|
Approx. 2.4cm
|
|
Product Width
|
Approx. 1.6cm
|
 |
Approx. 0.099kg
|
 |
Li-Po - Never Leave Charging Unattended
Li-Po
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area
This LiPo battery must be charged using the balance port and a LiPo balance charger.
|
Battery Specification
 |
Li-Po
|
|---|---|
 |
Crane
|
 |
 |
 |
11.1V
|
 |
1500mAh
|
 |
25
|
 |
3
|
 |
3.7V
|
 |
0.8cm
|
 |
8cm
|
Size guide
MAKE SURE YOU USE THE CORRECT CHARGER TYPE FOR THE CORRECT BATTERY
Airsoft Battery should only be charged with the chargers as they are specifically designed to work with the specific voltages required by the battery.
Different battery types have different chemical configurations, and require certain chargers to charge them. Charging a battery with the wrong charger can cause damage to the battery and charger, and can cause fires and further damage. Please ensure that before charging you double check that you are using the correct charger.
If your charger supports multiple battery types always ensure that it is on the correct settings before starting the charge.
We always recommend charging LiPos and other batteries in a charging bag.
If you are unsure of what battery or charger you have please get in touch with us via the Contact Us Page.
Using a LiPo?
If you're using a Li-Po battery only use a Li-Po charger!
Failure to do so can cause damage to the battery and charger!
Using a NiMh?
If you're using a Ni-Mh battery only use a Ni-Mh charger!
Failure to do so can cause damage to the battery and charger!