GATE TITAN™ II Bluetooth® MOSFET V2; Expert Firmware [AEG Rear Wired]

Gate
Code: TBT2-AER
131.99
  • TITAN™ II - Now with Bluetooth 5.2 built-in
  • For Rear Wired Version 2 AEG gearboxes
  • Improved sensor suite, more functions than ever

If you love to be at the cutting edge of Airsoft technology, the GATE TITAN™ II Bluetooth® MOSFET V2; Expert Firmware [AEG Rear Wired] belongs in your next build! This is the next generation of the superb GATE TITAN™, boasting innumerable improvements over the original, the most notable of which is its direct Bluetooth 5.2 compatibility. This means you no longer need the Gate Bluelink or USB link to customise your settings; simply download the Gate Control Station app and you can access the TITAN™ II's most advanced settings via the included Expert Firmware!

Like the original TITAN™, the TITAN™ II allows you to set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay.

The TITAN™ II also adds more trigger sensitivity options than the previous version, reduced power draw, several new and improved sensors and the ability to adjust pre-cocking by percentage increments, meaning more options than ever before. If you want your primary to be at the very peak of Airsoft technology, the TITAN ™ II Bluetooth® MOSFET V2; Expert Firmware [AEG Rear Wired] belongs inside!

Full description

Description

The Gate TITAN™ II is the latest generation of Gate TITAN™ MOSFET and now includes Bluetooth 5.2 technology, compatibility with many upcoming products in what Gate terms its “ecosystem” and further improvements to the TITAN™ sensor suite. Future possibilities with the TITAN II include a functional bolt catch, a magazine sensor and compatibility with the Gate STATUS on board computer, with much more due down the line!

This TITAN™ II is pre-wired for rear-wired AEG rifles using a version 2 gearbox, including M4/AR-15, SMG-5 and G3 AEG platforms. If you intend to use the TITAN™ II with an HPA engine, you will need the Gate Cables for Dual Solenoid HPA Engines to complete your build.

The TITAN™ II has even more trigger sensitivity settings available than the previous, with over 50 settings for the first millimetre of trigger travel alone. Via its gear movement sensor, the TITAN II has the ability to track the movement direction of each tooth of each gear, making this the first MOSFET in the world with this capability, providing even more precise cycle control than previous Gate ASTER™ and TITAN MOSFET™s.

The TITAN™ II provides all the advanced features of the original, game-changing TITAN™, including Pre-cocking, Burst mode, Binary trigger, adaptive active braking and trigger sensitivity adjustment. The optical sensor suite within the TITAN™ II is used to track the movement of the gears, piston, and trigger to ensure the gears complete a full cycle with each trigger pull and the gears stop exactly where they should. The TITAN™ II MOSFETs also provide premium-level quality-of-life functionality, including protection against over-discharge of your battery, short circuits, and overheating.

Just like its predecessor, the TITAN™ II has remarkably low power consumption and includes a "sleep mode" which activates when your AEG has not been fired for some time. This has been improved in the second iteration of the TITAN™ which boasts a remarkably low current draw, a mere 0.1mA which is ⅓ that of the previous TITAN™. This protects your battery in the event that you forget to disconnect it after a skirmish while other MOSFETs may drain the battery entirely over time, rendering the battery useless.

As with the original TITAN™, the TITAN™ II's board is specially coated with Mil-Spec MIL-V-173C Varnish, making it moisture and fungus-resistant. The TITAN™ II supports batteries in the range of 3V up to 17V, making it great for Ni-Mh, Ni-Cd, Li-Po, and Li-Fe Batteries and is compatible with most version 2 gearboxes on the market with no modification needed. While the fit should be almost "drop-in", we only recommend advanced internal upgrades like the TITAN II to those who are confident working on AEG internals and have the experience, patience and knowledge to get the job done right.

Features

  • 12 Months Manufacturer Warranty
  • TITAN™ II Improvements:
    • Direct Bluetooth 5.2 Compatibility - Adjust settings with a mobile device, no need for the Bluelink!
    • Reduced power draw - Only ⅓ that of the original TITAN™
    • More trigger sensitivity options - 50 Settings for the first millimetre of travel!
    • New optical gear sensor - Tracks the position of each individual gear tooth
    • Improved mechanical protection of the trigger sensors - Stronger than ever
    • New current sensor - Provides more precise telemetry measurements
    • Pre-cocking is now adjustable in % increments - More options than the original
  • Complete trigger set replacement kit
  • Designed for highly efficient AEG builds
  • Suitable for stock AEGs and upgraded AEGs
  • Great for DMR and standard FPS setups
  • Re-programmable with Gate USB Link or Gate Blulink
  • Optical sensor controlled - No mechanical contacts
  • Eight Optical Sensors
    • 1 Gear Sensor
    • 3 Selector Sensors
    • 5 Trigger Sensors
  • Replaces the Cut-off Lever
  • Compatible with most V2 Gearboxes on the market without Modification
  • Auto-Adjusting Pre-cocking / Braking system
  • Works with Dual Sector Gear and Short Stroked Gears
  • Detects up to 6 Trigger Positions for the Fine Tuning of the Trigger Breakpoint
  • MILSPEC Board coating - Robust coating, prevents corrosion
  • Adjustable Trigger Sensitivity - From a hair trigger to a realistic full trigger pill
  • Adjustable Pre-cocking Boost - Super fast response in semi-automatic
  • Adjustable Fire-Selector Mode - Loads of options!
  • Adjustable Burst Mode - Improves hit probability when engaging moving targets
  • Adjustable Rate of Fire - Great for maintaining realistic rate of fire
  • Two-Stage Trigger Mode, Possible for Semi / Full Auto without using a Fire Selector
  • Sniper Delay Modes - Tune your AEG up and use it as a sniper rifle!
  • Run-away motor 30 rounds limit mode
  • Protection for the TITAN™ II unit against overcurrent, under current, and overheating
  • Low Battery Warning - Stops you damaging your battery or getting caught off guard
  • Over-discharge battery protection
  • Configurable Fire Selector
    • Safe - Semi - Auto
    • Safe - Semi - Semi
    • Safe - Semi - Burst
    • Safe - Burst - Auto
    • Safe - Semi - Burst / Auto (Short Press - Burst, Long Press - Auto)
    • Semi - Burst - Auto (Safe Mode via fast switch Safe - Semi - Safe)
  • Kit comes with required parts for fitting (Please see Special Instructions)
  • Deans connector type - Pre-wired
  • Protection for Li-Po, Li-Ion, Li-Fe batteries
  • Optical sensor test mode for easier installation
  • Updateable firmware via USB-Link on a Windows / MAC PC
  • Statistics and additional settings are accessible using a USB-Link or Blulink with the GATE Control Station app
  • Can be diagnosed for errors using the USB-Link or Blulink
    • UVP1 – your battery is discharged
    • UVP2 – the voltage is lower than 3.8V
    • OCP1 – over current protection
    • OCP2 – the motor power supply circuit is shorted
    • OTP – the drop-in module temperature is too high
    • MOTOR DISC – you pulled the trigger but the motor did not move
  • Smart fuse system - Prevents power surges and wiring damage

Package Includes

  • GATE TITAN™ II Bluetooth® MOSFET V2; Expert Firmware [AEG Rear Wired]

Specification

General

Parts & Accessories Type
Electric Internal Parts, Internal Parts,
Internal Part Type
MOSFET
Patrol Base - Warning Icon
Warnings
Patrol Base - Warning Icon
Parts Fitting
Patrol Base - Warning Icon
Unique Part
Custom Parts

Part Specific

Part for Power Source Type
Electric
Package Includes
MOSFET

Electric Part Specific

Gearbox Icon
Gearbox Version
V2 Gearbox
Gearbox Version Compatibility Variant
Version 2

Size guide

Parts Fitting

Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff. 

Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.

We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!

Unique Parts

Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.

Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.

If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.