G&G Armament L85 A1 ETU Series AEG

G&G Armament
Code: …
€526.99
  • L85 A1 Airsoft Replica
  • ETU Controlled 
  • Bullpup Rifle

This Airsoft gun is a replica of the famous L85 / SA80 used by the British Armed Forces as their standard issue rifle. This Airsoft replica is G&G's offering into the L85 replica range, and features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback.

Full description

Help
Size guide

Description

The replica is built from high quality materials, including Aluminum, Nylon, Fiber, Steel, Zinc, and Polymers. The replica features a full metal body and outer barrel, with a polymer cheek rest, pistol grip, and handguard, with a rubberised butt plate. 

Externally the replica has everything you would come to expect from an L85 replica, with all of the replica parts which would make it an A1 version, with the standard straight charging handle. The replica features a rubberised cheek rest and butt plate to prevent slippage, and a large hand guard with opening top cover where they batteries are stored which power the replica. 

Internally the replica features G&Gs new ETU system which makes it stand out from all the other available replicas on the market.  The replica includes an Electronic Trigger Unit, making the trigger pull light and consistent. The ETU also helps prevent gearbox locking when rapid firing on single shot, as well as preventing the classic fault of trigger contact failure. The trigger can also be programmed to fire in three round burst. The weapon also features a MOSFET which allows for the use of 11.1v batteries. Thanks to the power of 11.1v LiPo the blowback mechanism is crisp, making the gun even more fun to use.

This replica is perfect for those Airsoft Skirmishers who are looking to put together a British Army loadout, or for those who love the look of Bullpup AEG.

Features

  • G&G ETU MOSFET System
  • Electronic microswitch trigger
  • Based on the L85 A1
  • 11.1v Li-Po battery ready
  • Safe, Semi and Fully Automatic firing modes
  • Programmable 3 round burst setting
  • Piston driven electronic blowback
  • Strong blowback action
  • Top dovetail mount rail
  • Detachable front sight
  • Pistol grip storage compartment
  • Front and rear sling loop points
  • Large battery storage compartment in the handguard
  • Rubberised butt plate to prevent slippage
  • Rubberised cheek rest for comfort
  • Mock bolt plate can be locked back for access to the hop-up
  • Adjustable gear based hop-up system for range and accuracy
  • Hi-roque long axis motor
  • 8mm Brass bushings
  • 413mm inner barrel
  • 45rnd Hi-Capacity Magazine
  • Branded:
    • 'UE 85 A08419'
    • 'RIFLE 5.56mm'
    • 'G&G L85 A1'
    • '1005-99-966-6470'

Package Includes

  • L85 A1 Carbine ETU Series AEG
  • Magazine
  • Instruction Manual

Special Instructions

Please note, the replica contains a G&G ETU meaning that 11.1v LiPo must be used.

Please note, that if you do not use an 11.1v LiPo the replica may double fire or jam due to the blow-back system.

Please note, that if you value your face then do not attempt to use the rifle left handed as the charging handle flies back at some force.

The carry handle is for cosmetic look only, and should not be used to carry the rifle, the rifle is too heavy to sustain the weight of it on just the handle.  Do not carry this rifle with what is the rear sight system on the L85 airsoft rifle.

The externals of the replica are metal where they would be on the real world gun. This includes things like the outer barrel, handguard, and receiver. If a real world gun has polymer parts then the gun will still be marked as full metal externals, examples of this would be an M4, where the Stock and Pistol grip are always made from Polymer.

Downloads
L85 Carbine ETU Series AEG Instruction Manual

Specification

General

Weapon Construction External
 Weapon Type
Assault Rifle
Over 18 Only Icon
 Over 18
Yes
Icon UKARA - United Kingdom Airsoft Retailer Association
 Defence / UKARA Required
Yes, No,
FPS Icon
 FPS (Feet Per Second), using 0.20g BB
Approx. 321fps ± 10%, using 0.20g BB
Site Legal Icon
 Site Legal, using 0.20g BB
Yes
Screwdriver Icon
 Pre-Built
Yes
Package
 Included Items
Magazine
Skill Level Icon
 User Skill Level
Regular Player, Experienced Player,
Patrol Base - Warning Icon
 Warnings
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area

Weight and Dimension

Weight KG Icon
 Weight (KG)
Approx. 3.78kg
Weapon Length Collapsed
 Length (Collapsed)
78.5cm
Weapon Length Extended
 Length (Extended)
78.5cm

Construction

Colour Wheel Greyscale
 Primary Colour
Black
Colour Wheel Greyscale
 Secondary Colour
Olive Green
Two Tone Icon
 Pre Two-Toned
No
Construction Icon
 Construction
Aluminum / Nylon / Fiber / Steel / Zinc / Polymer
Weapon Construction External
 External Construction
Polymer
Aluminium
Steel
Nylon Fiber
Zinc
Gearbox Icon
 Internal Construction
Polymer
Alloy

Weapon Specific

Power Source Icon
 Powered By
Electric
Blowback Icon
 Blowback
Electro Mechanical Blowback
Weapon Platform
L85A1/A2
Magazine Style Icon
 Magazine Style
STANAG
Fire Select Icon
 Fire Selector
PatrolBase | Fire Select Safe
 Safe
Patrol Base | Fire Select - Semi Automatic
 Semi Automatic
Patrol Base | Full Automatic
 Full Automatic
Patrol Base | Burst
 Burst
Programmable
Patrol Base | Burst
 Three Round Burst
Weapon Safety Features Icon
 Safety Features
Trigger Lock
Shooter Configuration Icon
 Shooter Configuration
Right Handed
Weapon Configuration Icon
 Weapon Configuration
Bullpup
Weapon Scale Icon
 Weapon Scale
1:1
Suggested BB Weight
0.28g

Hop-Up

Hop-Up Unit Icon
 Hop-Up Unit
Yes
Hop-Up Unit Adjuster Icon
 Hop-Up Adjuster
Gear
Hop-Up Unit Location Icon
 Hop-Up Location
Adjustable behind mock bolt plate when charging handle to the rear.

Furniture

Rail System Icon
 Rail System
Unique
Icon Stock Positions
 Stock Setting
None
Sight Type Icon
 Sight Type
Aperture Iron Sight

Barrel

Inner Barrel Length
510mm

Magazine Specific

Magazine Type
High Capacity, Wheel Wound, AEG,
Magazine BB Capacity
Approx. 450 Rounds
Magazine BB Fill Method
Fill Window
Magazine BB Fill Location
Top

Electric Gun Specific Information

Gearbox
Wiring Icon
 Gearbox Wiring
Front Wired
Digital Trigger Icon
 Gearbox Electronic Trigger
Yes
Motor
Airsoft Motor Icon
 Motor Type
High Torque
Battery Specific
Battery Connector
Patrol Base | Icon | Mini Tamiya
 Mini Tamiya
Compatible Battery
Compatible Battery Type
Li-Po
Compatible Battery Configuration
Crane
Compatible Battery Voltage
11.1v

Product Testing Data

Notepad Icon
 Test Description
Tested using 0.20g BB, tested on both 9.6v Ni-Mh and 11.1v Li-Po, only suitable for 11.1v.
Notepad Icon
 Test Date
15/05/20

Further Information

**Special Instructions**

The carry handle is for cosmetic look only, and should not be used to carry the rifle, the rifle is too heavy to sustain the weight of it on just the handle.  Do not carry this rifle with what is the rear sight system on the L85 airsoft rifle.

Size guide

Joule Charts

Special Instructions

These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.

FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.

Tap the tabs below to open the relevant chart for your replica.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
325 0.98 1.23 1.37 1.47 1.57 1.77 1.96 2.11 2.21 2.45
328 1.00 1.25 1.40 1.50 1.60 1.80 2.00 2.15 2.25 2.50
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
335 1.04 1.30 1.46 1.56 1.67 1.88 2.09 2.24 2.35 2.61
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
345 1.11 1.38 1.55 1.66 1.77 1.99 2.21 2.38 2.49 2.76
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
355 1.17 1.46 1.64 1.76 1.87 2.11 2.34 2.52 2.63 2.93
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90
420 1.64 2.05 2.29 2.46 2.62 2.95 3.28 3.52 3.69 4.10
430 1.72 2.15 2.40 2.58 2.75 3.09 3.44 3.69 3.86 4.29
440 1.80 2.25 2.52 2.70 2.88 3.24 3.60 3.87 4.05 4.50
450 1.88 2.35 2.63 2.82 3.01 3.39 3.76 4.04 4.23 4.70
460 1.97 2.46 2.75 2.95 3.15 3.54 3.93 4.23 4.42 4.91
470 2.05 2.57 2.87 3.08 3.28 3.69 4.10 4.41 4.62 5.13
480 2.14 2.68 3.00 3.21 3.42 3.85 4.28 4.60 4.82 5.35
490 2.23 2.79 3.12 3.35 3.57 4.02 4.46 4.80 5.02 5.58
500 2.32 2.90 3.25 3.48 3.72 4.18 4.65 4.99 5.23 5.81
510 2.42 3.02 3.38 3.62 3.87 4.35 4.83 5.20 5.44 6.04