- Dupont Zytel Polymer construction
- 1400rnd Capacity - Fill 10 mid-caps
- Loads an EPM-1 in 20 seconds!
If you're always the last one to be ready to hit the field or you want to save some time and effort loading your mags, the EMG "Autobot" 1400rd Automatic Electric Airsoft BB Speed Loader will be your best buy this year! The most powerful compact speed loader on the market, the Autobot is powered by either 7.4V or 11.1V LiPo batteries (not included) and uses a high-power drive motor which enables it to load a PTS EPM1-RX 250rnd Mid-cap in under 20 seconds!
The set includes 4 adapters which are secured to the Autobot using a steel set screw, allowing you to load AEG, GBBR, GBB Pistol and Sniper Rifle magazines along with tri-shot shotgun shells. The housing is made from super strong Dupont Zytel Polymer like PTS magazines and the feed tube is CNC machined stainless steel with a high-polish finish, promising ultra-smooth loading and maximum long-term reliability. One of the Autobot's most nifty features is the built-in unloading nozzle, allowing you to drain your magazines at the end of the game day directly back into the loader, without breaking a single fingernail or losing a single BB!
Some may say this is the lazy person's PTS ODIN Sidewinder, but we see it as the one speed loader to rule them all. How many thumb plunger loaders have you been through over your Airsoft career? With the EMG Autobot, you'll never need to buy another speed loader again!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
If you want to save time getting kitted up for skirmishing, the EMG "Autobot" 1400rd Automatic Electric Airsoft BB Speed Loader is the key. Boasting broad compatibility allowing it to load almost any Airsoft magazine out there, this convenient and super-high-quality electric speed loader will be the last speed loader you ever buy!
The housing is made from superlative quality Dupont Zytel Polymer just like PTS magazines and the feed chute is CNC machined from stainless steel; polished to perfection to guarantee flawless reliability and buttery smooth loading each time you use it. The internal gearset is also CNC machined from high-carbon steel, giving it incredible strength for maximum reliability with the high-power internal motor which has the torque to load even PTS 250rnd EPM1-RX Mid-caps in a mere 20 seconds!
Packaged with adapters for loading AEG mags, GBBR/GBB pistol mags, sniper rifle mags and tri-shot shotgun shell mags, the Autobot is as versatile as it is convenient! Each of these adapters is secured to the loader using a steel locking set screw to ensure it stays firmly attached while the Autobot does its job. The set also includes a 3M self-adhesive anti-slip pad which can be fitted to the base of the loader to keep it firmly in place on flat surfaces.
The battery compartment is located on the bottom; simply open the port to reveal the Deans/T-plug battery connector inside. The compartment itself measures 19 x 26 x 73mm approximately, well suited to a 7.4V 600mAh LiPo battery. The Autobot can also handle 11.1V LiPos but make sure you measure up before ordering!
To load your magazine, install your battery and the appropriate adapter, securing the adapter with the steel grub screw/set screw on the side of the stainless steel feed chute. Next, press the on/off switch on the side to bring the loader online. Position your magazine's feed port to align with the loading nozzle then push it down and hold it in place. The loader will automatically load your magazine to capacity, and when you hear the noise change, remove your magazine; you are now ready to shoot!
If the game ends and you still have BBs loaded, the Autobot will handle that too! Simply install the appropriate nozzle on the unloading port on top and you can empty your magazines directly back into the loader, avoiding losing BBs to the floor and saving you even more time so you won't be the last one on-site.
No matter what type of magazine you use, the EMG Autobot will change your game, saving you time and effort so you can focus on the more enjoyable aspects of the hobby. Whether you have a handful of EPM1 mags to load, a pocket full of shotgun shells, 10 GBBR magazines or practically anything else, the EMG "Autobot" 1400rd Automatic Electric Airsoft BB Speed Loader is the key to spending more time shooting and less time loading up!
Features
- 1400rnd Capacity - Enough to load 10 standard Mid-caps, loads an EPM1 in 20 seconds!
- No winding - Save yourself the hassle, strain and time!
- Dupont Zytel polymer construction - Rock hard, high quality polymer
- The fastest & most powerful compact electric speed loader on the market - Save yourself time loading up!
- Locking reservoir cover - Store it in your kitbag without worrying about spillage
- High-polish CNC stainless steel loading tube - Ultra-smooth feeding, maximum reliability
- High-power drive motor - Powerful enough to load mid-caps with the strongest springs (EPM1 & EPM1-RX)
- CNC Machined internal gear set - Maximum longevity and durability
- Customisable Dot Matrix on either side - Mark your loader for I.D purposes
- Unloading nozzle - Convenient and easy unloading at the end of a game day
- 3M Self-adhesive non-slip base pad included - Keeps the loader firmly in place on flat surfaces
- Supplied with 4 nozzle adapters:
- For AEG
- For Shotgun Shells
- For GBBR/GBB Pistol
- For Sniper Rifle
- A locking set screw keeps the adapter securely in place during loading - No chance of failure
- Powered by a 7.4V or 11.1V LiPo battery (not included) - Recommended battery: 7.4V 600mAh LiPo
- Battery compartment dimensions: 19 x 26 x 73mm approximately (Deans/T-Plug connector required)
Package Includes
- EMG "Autobot" 1400rd Automatic Electric Airsoft BB Speed Loader
- AEG adapter
- Shotgun Shell adapter
- GBBR/GBB Pistol adapter
- Sniper Rifle Adapter
- 3M Self-adhesive non-slip base pad
Specification
General
|
Parts & Accessories Type
|
Magazine Accessory, Speed Loader,
|
|---|---|
 |
No
|
 |
Li-Po, Li-Po - Never Leave Charging Unattended , Li-Po - Only Use Approved Chargers , Li-Po - Charge in a Fire Safe Area ,
|
Weight and Dimension
|
Product Height
|
Approx. 7.3cm
|
|---|---|
|
Product Length
|
Approx. 1.9cm
|
|
Product Width
|
Approx. 2.6cm
|
Construction
 |
Black
|
|---|---|
 |
Dupont Zytel High Density Polymer.
|
 |
Dupont Zytel Polymer
|
Customer reviews
