Double Eagle M923A DEK762 7.62/.300 BLK AEG

Following in the footsteps of Double Eagle's Honey Badger, UTR45 and Aeronox AX15, the M923A DEK762 gives you the same fantastic internals recent Double Eagle releases have been lauded for in a unique new PDW style body with a leaning towards dealing with close encounters. With a CNC machined aluminium M-LOK handguard, 14mm CCW male threaded outer barrel and 20mm Picatinny railed receiver, you will never be short of accessory options running the DEK762, and on the inside, things get even more impressive!

Inside the DEK762 the Double Eagle FALCON EFCS takes pride of place, offering programmable fire controls including burst mode, binary trigger and trigger sensitivity adjustment; features which are very, very rare in a platform in this price range. To make things even sweeter, the inner barrel is a 6.04mm tightbore example, the HOP-up unit is the latest rotary adjuster design and the steel gearset runs on 8mm ball bearing bushings for low friction and a smooth gearbox sound. Whether you need a new primary to contend with the ever-increasing number of ultra-short setups out there or you simply like to play aggressively and move quickly, the DEK762 is a fantastic choice with the added bonus that it looks absolutely unique!

Starting at the front we can find a sound amplifying muzzle device mounted to the 14mm CCW male threads at the tip of the 5-inch outer barrel. This device is what gives the DEK762 its absolutely epic muzzle report, guaranteed to scare the living daylights out of anyone within earshot and rivalling the legendary G&G Firehawk when it comes to the intimidation factor. If you skirmish more discreetly and like to sneak around, you may find a tracer unit or suppressor to be better suited to your playstyle but thanks to the 14mm CCW male barrel threads, you can mount one right away with no adapter needed.

The sound amp sits slightly recessed into the 5.5-inch M-LOK handguard, giving the DEK762 the modern snub-nosed look of a super compact AR PDW. Fortunately, the handguard is designed with this in mind and is enlarged at the front, allowing the sound amp or a tracer/suppressor with an outer diameter of approximately 35mm to be installed while still allowing the front M-LOK slots to be used. Visible through the handguard's M-LOK slots we can also see a nice touch of realism in the form of a dummy gas block, giving the DEK762 two thumbs up from the stitch counters!

The handguard itself is CNC machined from aluminium for precise details and perfectly in-spec rails and M-LOK slots. The upper surface has a 20mm Picatinny rail machined in which meets the receiver rail seamlessly, allowing for large optical sights and red dot sights with magnifiers to be mounted with plenty of space to spare. M-LOK slots are present at the 3, 6, and 9 o'clock positions with additional slots at the offset angles, giving you more options than most when it comes to where you mount your M-LOK accessories. On either side, we are also treated to a QD sling socket constructed from steel which can be paired with QD sling swivels, allowing you to mount your sling and quickly remove it in seconds.

Included in the box is an M-LOK hand stop with barricade bracing texture at the front and a pair of M-LOK rail covers, giving you a few thoughtful accessories to get your DEK762 up to speed. Also included and pre-installed onto the top rail is a set of flip-up iron sights which can be used in either "open sight" configuration when left flipped down or as an "aperture sight" when flipped up, with similar functionality to the iron sights provided on the real world MP7 but with a more modern look. When flipped up, the iron sights are fully adjustable for both windage and elevation via the rotary dial on each sight, and the rear sight provides 2 different aiming apertures; a large one for low light use and full auto fire and a smaller one for more accurate shots and bright, outdoors environments.

The receiver is constructed from high density polymer, keeping the weight of the DEK762 low and leaning into its PDW design. The polymer used is very strong, with not a hint of flex, creaking or wobble to be found and has a lovely matt finish with a textured feel. The receiver design is patterned after real steel "billet" style AR receivers, boasting a built-in magazine well flare, angular receiver details and a built-in trigger guard to improve strength when compared to the standard AR receiver design. The front of the magazine well also has linear serrations on its surface, allowing it to be used as a makeshift grip when shooting in unconventional positions.

The fire selector is located just above the pistol grip, right where we expect it, and offers 3 modes of fire; Safe, semi-automatic and fully automatic, with a 90-degree throw between each mode. Thanks to the pre-installed FALCON EFCS MOSFET, the fire controls can also be reconfigured for burst modes of varying duration and binary trigger, giving the DEK762 some advanced party tricks to improve hit probability and letting you easily customise the setup to suit your playstyle.

The magazine release is positioned on the right side of the magazine well, safety recessed inside the "magazine well fence" to reduce the chances of an inadvertent mag drop in the thick of it. Following the standard M4/AR-15 pattern, the magazine release is a push-through design which is very easy to reach from a firing grip and has texture on its surface to provide effective grip in all weather conditions. Over on the left side, we have what looks like an ambidextrous magazine release but unfortunately, this is a dummy control designed in for pure aesthetics. While this is a bit of a shame, if you know your way around an M4/AR-15 AEG you can install your own ambidextrous magazine release to allow for left-handed use.

At the bottom of the receiver we come to the pistol grip, which is an ergonomic design which has a similar look to the renowned PTS EPG-C; with a more compact, slimline design than most M4/AR-15 AEG grips and linear texture on the front and rear, with additional crackle texture on either side for flawless gripping qualities. As they did with previous releases, Double Eagle has done a fantastic job with this grip, partnering high-quality polymers with a very comfortable design and smoothly transitioning the grip to the receiver to reduce "hot spots" which can cause irritation when used for long durations. The techy types will be happy to hear that the motor height adjustment screw is nice and large, making it easier to apply motor adjustments following disassembly for upgrades or maintenance.

The charging handle is also right where we would expect it; at the top rear of the receiver. The handle design mimics real-world "raptor" style charging handles but can only be operated from the left side due to its left side latch. Pulling the charging handle rearwards will spring open the mock dust cover and retract the mock bolt carrier beneath, providing access to the rotary adjustable HOP-up unit.

The rotary HOP-up design is widely known as the best HOP-up design for M4/AR-15 platform Airsoft guns and benefits over the older gear adjuster in that it holds its setting more effectively over long durations under the vibrations of full auto fire and provides far finer adjustment increments. The HOP-up allows you to tune your DEK762 for different weights of BB, looking for the flattest possible trajectory. When your adjustment is complete, you can hit the realistically designed "ping pong paddle" bolt release on the centre left of the receiver to send the mock bolt carrier home with a satisfying "clank".

Following the receiver, we come to the adjustable PDW stock which differs from the average PDW stock in one very important aspect; its decently sized battery compartment. The usual case with PDW stock is that you have to source a battery which is a very specific size and you will usually need at least two to guarantee you have enough juice for a full-day skirmish. Thankfully, the compartment in the DEK762 fits standard buffer tube style stick batteries, meaning you probably already have one that will fit straight in.

To access the battery compartment, simply hold the stock adjustment lever and the lever at the opposite side down, then side the butt plate and stock bars off to the rear. With this done, you will see the hinged battery cap at the rear of the buffer tube, simply press the button on the top to open it up. Inside, we have a Deans battery connector to which you connect your chosen battery. We recommend an 11.1V 1300mah LiPo battery in stick configuration for the best performance.

The stock can be adjusted by simply pulling it straight out, saving you time messing with levers and buttons in the heat of a firefight and can be collapsed again by pressing the lever on the left side, pushing the stock closed and releasing the lever to lock it in place. The buffer tube and butt plate are both constructed from high density polymer and the stock bars are alloy to add strength where needed. On the bottom of the buffer tube, we are treated to another QD sling socket, positioned centrally to allow for ambidextrous operation. This can be used alone to mount a single-point sling via QD sling swivels or paired with the front QD sockets for a two-point sling setup, giving you access to the latest and greatest way to mount your sling.

On the inside, the DEK762 is very well equipped, even before you consider the price! The inner barrel is a 6.04mm tightbore example, promising improved accuracy at range and a slight FPS boost thanks to improved air efficiency. The gears are constructed from steel and run on 8mm ball-bearing bushings, producing minimal audible drama as the gun fires and providing reduced friction for a longer lifespan. All of the gearbox internals are Tokyo Marui version 2 spec, meaning upgrades are easily within reach for those who simply cannot use an AEG without upgrading it!

Adding some seriously advanced features to the DEK762 we have the FALCON EFCS MOSFET, Double Eagle's programmable ETU system which allows for burst modes or binary trigger to be programmed in using the fire controls of the AEG itself (instructions can be found below in the "Special Instructions" section). The FALCON also provides low voltage cutoff, preventing the AEG from being used when the battery voltage drops too low, and also allows you to select one of 3 different trigger sensitivity settings, from a hair trigger to a more realistic full pull. Features like these are usually only found in replicas twice this price and are a big part of what elevates the DEK762 above other similarly priced AR PDW AEGs, giving you an advanced look on the outside and advanced functionality to match!

For those looking for a compact primary with a unique look and the ability to use standard M4/AR-15 AEG magazines or its own unique 7.62x39 style AR mags, the DEK762 is the way to go. Rocking all the modern accoutrements a cutting-edge design deserves with battery space almost unheard of for a PDW M4 platform, the DEK762 will give anything else out there a run for its money!

Features

• 6.04mm Tightbore inner barrel
• 14mm CCW male threaded outer barrel - Suppressor/tracer ready!
• Sound amplifying muzzle device pre-installed - One of the loudest AEGs we have ever shot
• CNC Aluminium M-LOK handguard - M-LOK slots at 3, 6, 9 & offset angles, 20mm Picatinny at 12 o'clock
• 20mm Picatinny railed receiver - Ready for red dot sights & scopes, pre-installed flip-up iron sights
• Modern "billet" style receiver - High density polymer construction, flared magwell & enlarged trigger guard built-in
• Ambidextrous fire selector switch - Great for left or right-handed shooters, programmable fire modes via MOSFET
• Rotary adjustable HOP-up unit - Accessible with the charging handle pulled and mock bolt locked back
• Ambidextrous QD sling sockets front and rear - Ready for QD sling swivels and single or two-point slings
• 4-Position sliding PDW stock - Compact and adjustable with plenty of battery space inside
• Ergonomic pistol grip - Linear texture front and rear, crackle texture on each side for flawless grip
• Includes 2 x M-LOK rail covers and an M-LOK hand stop - Less for you to buy to get her set up!
• Rear wired to a Deans battery connector - Smaller and less resistance than the mini-Tamiya connector
• Packaged with a 7.62x39 style M4/AR-15 magazine - Compatible with standard M4/AR-15 AEG magazines (see "Special Instructions")
• Recommended battery: 11.1V 1300mAh LiPo stick battery

Package Includes

• Double Eagle M923A DEK762 7.62/.300 BLK AEG
• 130rnd Medium capacity magazine
• User manual
• Cleaning rod
• Deans connector kit
• Deans to mini-Tamiya adapter
• M-LOK Hand stop
• M-LOK Rail cover x 2

Special Instructions

Magazine compatibility

The Double Eagle DEK762 accepts the vast majority of M4/AR-15 AEG magazines but will not accept NUPROL LS-Mag series magazines.

FALCON EFCS MOSFET

Please note that the gun's EFCS system is only compatible with LiPo Batteries, and is not compatible with LiFe or NiMh batteries.

Please note that both binary fire and burst modes can be set, as binary fire is applied to semi, and 1-5 fire mode is applied to full auto.

Please note that fitting the supplied Deans connector kit will constitute a modification of the replica. If you carry out this modification you will not be able to return your replica.

FALCON EFCS Protection Feature

Gearbox Protection

When the current is too high or abnormal the power supply on the EFCS will disconnect to protect the motor and battery, and the motor will vibrate three times.

If the battery's voltage is too high the EFCS power supply will automatically disconnect and the motor will vibrate twice.

Battery Protection

The FALCON EFCS has an operating voltage between 6-13v. If the voltage is too low or too high the power supply will be cut. If the voltage of your battery is too low, the FALCON will notify the user via 5 vibrations, then cut the power to protect your battery.

Vibration Description

• 1 - Power On
• 2 - System Error
• 3 - Voltage too high
• 5 - Low Voltage

Falcon Electronic Fire Control System

1-5 Shot Mode

• Set the fire selector to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger once and release it to enter 1-5 shot programming mode. Release it when the motor makes a sound.
• Pull the trigger 1-5 times depending on the amount of shots you want a single trigger pull to make.
• Set the fire select to full auto.

Trigger Sensitivity

• Set the fire selector to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger twice and release it to enter sensitivity programming mode. Release it when the motor makes a sound.
• Pull the trigger between 1-3 times for different levels of sensitivity.
  • 1 - Highest Sensitivity
  • 2 - Standard Sensitivity
  • 3 - Low Sensitivity

Binary Fire Mode

• Set the fire selector to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger three times and release it to enter binary fire programming mode. Release it when the motor makes a sound.
• Set the fire selector to semi-auto
• Repeat the same process to disable binary fire

Reset to Default

• Set the fire selector to SAFE.
• Pull the trigger and hold for 5 seconds to reset all settings.