CYMA EMG CM.092A Spike's Tactical Assassin M4 SBR

EMG and Spike's Tactical have teamed up for something a little special. EMG bring their knowledge of the Airsoft market and Airsoft rifle construction and Spike's Tactical bring their experience in real-world firearms for a match made in heaven. All this project was materialized by manufacturer CYMA, who has been a mainstay in the Airsoft world for many years now, only going from strength to strength, bringing you something at a fantastic price, considering the features, details and build quality of this rifle. If you're looking for an AR M4 platform but fancy something a little more unique, the CM.092A Spike's Tactical Assassin SBR is a fantastic choice, and in full metal no less!

Starting at the front of the 12-inch barrel, we have the side venting muzzle brake, which is a fitting inclusion in this stripped-down and skeletonised build as the brake has large side cuts on the side, which perfectly fits the aesthetics of the build. This flash hider mounts to 14mm CCW male threading, so if you have a preferred flash hider or you want to add a tracer unit or suppressor this is easily done, no adaptors necessary.

The most striking feature of this rifle is the 10-inch skeletonised handguard, which is quite unlike anything else seen recently in terms of design and features. If you like the M-LOK system, with skeletonised stylings, but still enjoy the feel or a more chunky classic, quad rail style form factor, this will definitely appeal to you. The handguard features diagonal serrations, which not only reduce weight but also show off the sleek alloy barrel underneath for a really sleek and modern look. The serrated grooves also complement the rail system in terms of aesthetics. This is true of both the monolithic top rail, which joins with the receiver seamlessly and the included 2.5 rail panel, which attaches to any of the MLOK slots. Built directly into the handguard are 4 QD sling points, which can be found on either side at the front and rear of the handguard, for use with attaching the sling of your choice and can be used in tandem with the sling points on the stock and the sling plate behind the buffer tube.

The CM.092A sports fully-licensed Spike's Tactical, advanced flip-up ironsights, which means you can have the flipped-down for a lower profile when the sights aren't being used, during run and gun-style gameplay. The rear sight also sports an aperture design to allow for more accurate aiming to pick off far-away targets with ease. The sights can also be adjusted for windage and elevation, with the rear sight having a rotary gear that can be adjusted from left to right and the front sight having a gear that can shift the sight up or downward. The rear sight also features indentations to indicate when the sight is central.

As we arrive at the receiver we can see some great additions to the CM.092A and details that are unique to the Spike's Tactical range. Particular attention has been taken by EMG and Spike's Tactical to create a fully licensed replica, meaning that this Airsoft rifle has been manufactured with MOD-ST15 standards. Specific engraving from spike tactical can be found on the lower receiver. An important thing to notice each of these Airsoft rifles has a unique serial number. All this particularity of this replica gives it a more realistic appearance and comes as close to the real thing as possible. The well-weighted alloy makes for a sturdy build that feels great when rampaging around the battlefield.

The CM.092A comes packed with a 130-round magazine, which is, again, constructed from tough, but lightweight alloy. The magazine is that of a mid-cap design, meaning that there is no wheel winding to feed the BBs and no 'battle-rattle' of loose BBs inside the mag like in high-caps, which may make the difference during skirmishes if you're trying to conceal your presence.

Moving downwards, the CM.092A features a somewhat traditional pistol grip, that is a little wider and more filled out than other standard offerings. This allows for a comfortable grip in combination with the stippled texture, featured on the entirety of the grip.

At the rear of the receiver, we are treated to an ambidextrous sling plate which offers points to attach a hook-style sling on either side of the AEG. This sling point is perfect for a single-point sling, but can also be used in tandem with the front QD sling sockets if you prefer a two-point sling. This sling plate in particular sports a slimline design so as to not be intrusive when the rifle is held against your person. Behind the sling plate, we come to the castle nut, which holds the 6-position M4/AR15 buffer tube onto the receiver.

The CM.092A comes included with a 130-round magazine, which is, again, constructed from tough, but lightweight alloy. The magazine is that of a mid-cap design, meaning that there is no wheel winding to feed the BBs and no 'battle-rattle' of loose BBs inside the mag like in high-caps, which may make the difference in the field if you're trying to conceal your presence.

Positioned on the right hand of the receiver on the magazine well, The magazine release is protected from accidental mag drops by a protruding magazine well fence machined into the receiver itself. This is great for when you are carrying the CM.097A on a sling, as it prevents the mag catch from being pressed by your kit. The position of the mag release is well thought out and sits right within reach of the trigger finger when the rifle is held in a firing grip.

The HOP unit can be found behind the mock ejection port by pulling back the ambidextrous charging handle, revealing the chamber inside with the rotary-style unit. The rotary gear can be adjusted to add backspin to your shots, which in turn adjusts your shots for windage and elevation.

Constructed from aluminium alloy, the buffer tube is compatible with the vast majority of aftermarket M4/AR15 AEG stocks, though the one that comes with the gun is very impressive. The stock is that of a modernised crane stock, with a well-sized battery compartment, a low profile adjustment lever with QD sling sockets on either side and a hinged butt plate. Like the crane stock, the sides of this stock are angled to provide a comfortable cheek weld, and there are slots present in the stock for a traditional strap sling.

The low profile adjustment lever reduces the chances of the stock snagging on your kit as you move, and the hinged butt plate means when you need to switch batteries you don't have any separate parts to drop in the leaf litter and never see again. To access the battery compartment, simply pull the button in the centre of the butt plate down, and the butt plate will hinge down, revealing the battery compartment and the Deans connector within. We recommend a 7.4V 1300mAh LiPo battery for the CM.097A in either stick or nunchuck configuration.

As for the internals. we are in for a real treat, due to the replica coming equipped with upgraded CYMA Platinum technology. The usual Platinum gearbox found in the other CYMA Platinum AEGs remains, with its pre-installed ETU and MOSFET, quick change spring system and reinforced shell, but now has additional upgrades installed, because, why not? The standard steel gearset has been replaced with a 13:1 ratio gearset running on 8mm bearing bushings, which combines with the impressive high-speed motor to provide a monstrous rate of fire, and exceptional trigger response.

A silent piston head and a silent cylinder head have also been installed, with a double O-ring on the cylinder head and a ball bearing on the piston head to help reduce the overall noise from the gearbox for a smoother sound and more efficient running. The spring guide is also equipped with ball bearings, reducing the stress on the rear of the gearbox and effectively resolving a known weakness in Airsoft gearbox designs.

Adding to the already impressive internals we have a 6.03mm tightbore inner barrel, which grants you improved accuracy and a slight FPS increase when compared to a standard bored barrel, helping you get a bit more power from the same internals for a more efficient overall system. Everything is upgraded on this AEG, so if you want to save yourself some hassle down the line and get something future-proofed, the CM.092A would be an excellent choice.

If you're looking to skirmish with something a little more unique, that is also fully licenced, full metal and as close to the real-world Spike's Tactical rifle as possible in an AEG replica, the CM.092A is a fantastic bit of kit. With an eye-catching design, complete with modern features such as both RIS and M-LOK rail systems, this rifle is sure to turn heads and take names on the battlefield!

Features

• Full metal construction
• Licensed Spike's Tactical design
• 6.03mm Tightbore inner barrel
• MOSFET/ETU pre-installed
• Version 2 CYMA Platinum gearbox
• High speed motor
• 13:1 Ratio high speed gearset
• Silent piston head and cylinder head
• Rotary adjustable HOP-up unit
• 14mm CCW male threading - Tracer/suppressor ready
• 10" Skeletonised handguard - reduces weight, while looking sweet!
• M-LOK handguard - Slots at 3, 6, and 9 o'clock
• 20mm Picatinny railed receiver - ready for an optical sight
• 2.5" Picatinny rail panel
• Flip up aperture iron sights - Fully adjustable, nice and light
• Ambidextrous steel sling plate - Perfect for a single-point sling
• Front and rear QD sling sockets - Great for a two-point sling
• Ergonomic pistol grip with texture
• 6 Position sliding stock - Adjustable for any body type
• Modern battery stock - Low profile adjustment lever, hinged butt plate
• Compatible with M4/AR15 AEG magazines

Package Includes

• CYMA EMG CM.092A Spike's Tactical Assassin M4 SBR
• 130rnd mid-cap magazine
• 2.5" Picatinny rail panel
• Allen key