CYMA CM.009D MOSFET Edition

The CM.009D is a mostly faithful replica of the Vietnam Era M653 which was amongst the earliest AR15 carbines to be issued to US Army, USMC and MACV-SOG (Military Assistance Command, Vietnam – Studies and Observations Group) during the latter stages of the conflict. The M653 can be identified by its 14.5 inch pencil barrel, fixed A1 carry handle and collapsing 2 position XM177 stock. This rifle was still in use way into the 1980s, and is the conceptual grandfather of the M4A1 we all know and are sick to death of seeing at every skirmish. Lets take a look and see what makes the CM.009D stand out...

Starting at the muzzle we can find a steel birdcage flash hider of the A1 type, with no wire cutter cutout and no facilities to mount QD suppressors. Excellent! Anything else would not be doing this rifle justice. Beneath the flash hider we can find a 14mm CCW thread at the end of the alloy outer barrel, so if you are going for the 80s or BHD look you can still add a suppressor. Moving rearwards we come to the AR15 triangle front sight/gas block, which houses an elevation adjustable front sight blade, bayonet lug for your rubber blades and a sling mount. Next we arrive at the handguards, which are the only part on this rifle that are not period accurate. These are M4A1 large handguards and have been used by CYMA to allow larger batteries to be used in the CM.009D, keeping it running all day long. The handguards feature ribbing across all surfaces to give the shooter positive control over the rifle in even the worst jungle monsoon. The battery connector is a Deans type, reducing resistance and allowing for more efficient battery use. The handguards attach via a "slip ring", the old school equivalent to the delta ring, fulfilling the same function and allowing any delta ring compatible handguards to be used on the CM.009D.

Next we arrive at the receiver, which is 100% period accurate for the M653. The lower receiver is an A1 fenced type with the correct lack of strengthening around the front receiver pin hole, giving it that distinctive A1 profile. The fire selector is present on the left side, and lies comfortably beneath the thumb when taking a firing grip. The markings "SAFE SEMI AUTO" appear on both sides of the receiver and are machined in, pairing well with the period accurate nature of the CM.009D. The magazine release can be found on the right side of the receiver, protected from accidental magazine drops by the "magazine catch fence", which is machined as part of the lower. The upper receiver is an A1 type, featuring a fixed A1 carry handle with A1 aperture sights on the top and a "teardrop" forward assist but no brass deflector on the right side, as should be expected for an M653 replica. The charging handle can be found at the top rear of the receiver, and when pulled, locks the mock bolt to the rear giving you access to the gear adjustable HOP inside the ejection port. The mock bolt can then be released using the "ping pong paddle" bolt release, found on the left side of the receiver. A nice touch adding to the realism of this already super-realistic AEG! The pistol grip is an A1 type, with checkering on both sides to provide a grippy surface, and lacking the finger groove found on A2 grips, which some find less comfortable. The grip has a heat sink motor base plate, allowing the AEG's motor to cool between extended strings of fire. On the left side of the lower receiver you will find your unique serial number, an excellent feature for theft prevention and to help you identify which rifle is yours in the safe zone.

Following the receiver, we can find an AR15 buffer tube which is compatible with any buffer tube stock you wish to put on, though we advise you avoid heresy and keep the original textured polymer XM177 stock right where it is. The buffer tube is a 2 position tube, allowing either fully extended or fully closed positions, though this can be swapped for a modern 6 position one and no one would know and come after you for ruining a period accurate old-school AR. As mentioned, the stock is an XM177 type and uses textured high density polymer construction, with a diamond textured butt plate to stop the stock from sliding around on your shoulder. There is a sling point present on the stock, allowing 2 point slings to be used.

The internals of the CM.009D are exactly what you would expect being a higher-end AEG offering from CYMA. The version.2 gearbox features 8mm steel bearing bushings, a bearing spring guide, aluminium silent piston, and cylinder head and a polycarbonate piston with steel teeth. This combination of parts is proven to be reliable, and a considerable upgrade over most AEGs in this price range. The gearbox also features a quick change spring system, accessible through the buffer tube using the included allen key, allowing the velocity to be increased or reduced depending on your local site's limits. What's more? CYMA has pre-installed a MOSFET processor unit within the gun which provides active braking to prevent your gearbox from over spinning and protect the electrical components inside, as well as raising the rate of fire and trigger response. The inner barrel is a tight bore 6.03mm of 363mm in length, giving this AEG excellent accuracy and consistency. To round things out, the motor inside the CM.009D is a high torque motor with Neodymium magnets inside, assisting the CM.009D in its smooth and rapid operation. If you are a Vietnam war movie fan, BHD impressionist or you want to make a statement about how rails are not needed to get kills, the CM.009D is perfect for you!

Features

• Perfect A1 receiver
• A1 textured pistol grip
• Period Accurate M653
• Full metal construction
• Sling points front and rear
• Quick change spring system
• MOSFET processor unit pre-installed
• 6.03mm Tight bore inner barrel
• Functional mock bolt hold open
• High density polymer furniture
• Lightweight "pencil" outer barrel
• Unique serial number on each replica
• Fixed A1 carry handle ghost ring sights

Package Includes

• CM.009D M653 AEG
• High Capacity magazine
• Allen key for quick change spring system