CYMA Airsoft

For the AK guys who want to join the rest of us in the 21st century, CYMA has come through! The Modular KeyMod Railed Handguard is constructed from aluminium and includes a smattering of KeyMod 20mm Picatinny rail sections pre-installed, which can be moved around and placed wherever you like. This handguard is particularly interesting as it can be set up in several different configurations, either with or without the included handguard extension section and with the choice of leaving the upper handguard sections on or removing them to lower the weight. 

The CYMA CM.041SD6 High-Speed is an SMG-5 Platform Airsoft Electric Gun, which has been upgraded internally to provide an awesome Rate of Fire. A reinforced Version 2 Gearbox awaits inside, with goodies such as Steel Gears, Steel Rack Piston and other anodised CNC internals, to create an SMG-5 that performs like no other.

If your SMG-5 trigger is a bit worn out or you have a flat trigger inside and you want a more classic SMG-5 look, the CYMA Trigger for SMG-5 AEG is what you need. This trigger is only for SMG-5 AEGs which use a version 2 gearbox and will not fit the version 3 gearbox equipped SMG-5K and SMG-5PDW series. The trigger itself is constructed from alloy and has the curve of the original SMG-5 trigger, making for an appropriately realistic look. Included with the trigger is a trigger return spring, so if you have lost this part you're in luck!

If you have damaged your HOP-up unit and are looking for a replacement, CYMA are now offering their original HOP-up units as an aftermarket part. This unit is for the CM.041K and CM.041PDW AEGs, but will not fit the full sized CM.041 AEGs. The unit is constructed from polymer and comes complete other than the HOP-up rubber. The HOP unit, slider, c-clip and HOP nub are all included, so if you have lost or damaged one of these bits you are in luck!

If you need a new nozzle for your CYMA CM.057 or Real Sword Dragonov SVD, CYMA has you covered! The Aluminium Nozzle for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and compatible with the CYMA CM.057 SVD/SVU AEG series and the Real Sword Dragunov SVD AEG. 

This is a replacement original part specifically designed for the Real Sword pattern SVD gearbox used in the CYMA CM.057 series and is not compatible with A&K SVDs or others. If you've built a beast of a DMR with your SVD and you want to get ahead of any potential parts failures this is a great part to have in the toolbox!

If your selector switch is damaged or you lost a bit during maintenance this set can be a lifesaver! The CYMA Ambidextrous Fire Selector Gears for CM.098 is a replacement original part set for the CM.098 series of SR-25 AEGs and includes the internal selector gears and axis for the CM.098 ambidextrous selector switches. 

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

If you want to restore the factory fresh look to your workhorse AK, this part may be of use. The Rear Sight Block for the CM.04x Series is an original replacement part for AKM and AK74 rifles of the CM.04x series. This part will not work on AKS-74U AEGs, but should otherwise fit AKs which use the LCT style of construction. The sight block is constructed from alloy and comes with steel pins to mount it, and includes the handguard disassembly lever but does not include the rear sight or the rear sight leaf spring. The surface finish of this part is a rough textured finish which is a close match for the hard-wearing paint applied to Russian AK variants of the 1960s and onwards.

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 100 rounds so you can stay in the fight longer with your AEG.

The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves. Loaded at the top of the mag using a speed loader, the magazine is that of a mid-cap mag, which means no battle rattle when sneaking around.

Please note that these mags are specifically for CYMA Airsoft AEGs.

Looking to give your CM.706 Sniper rifle a bit more range? The CYMA Upgrade set for CM.706 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

The Stainless Steel Cylinder for CM.701 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.701 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

If you have plans to style up your AK for 21st century combat the CYMA Aluminium M-LOK Handguard adds M-LOK accessory slots so you can mount the latest and greatest mission essentials and benefit from reduced weight! The set includes an upper handguard with "Grater" style vents and a lower handguard with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions.

Both the upper and lower handguard are constructed from aluminium using CNC machining and are finished with matt black anodising for a smooth and flawless finish. Compatibility-wise, this handguard should fit practically an AK47/74 platform AEG or GBB rifle but will not fit AKS-74U rifles due to their shorter length handguards. Give your AK the PMC or civilian tactical look!

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.

If you're looking to revamp your old SR25 why not take a walk on easy street and replace the whole gearbox? The CYMA CM.098 SR25 V2 Long Gearbox Set w/Motor is the exact gearbox used in their CM.098 SR25 series and should be compatible with Classic Army style SR25 AEGs which use the version 2 long gearbox (Classic Army, CYMA and A&K). This gearbox is well equipped, and includes a MOSFET/ETU prewired in, a quick change spring system, an M130 spring and also includes a high torque Neodymium magnet motor. Perfect to fix up an old big boy AR!

If you are looking for a pump action shotgun to lay down the law in CQB this is one of our favourites! The CM.360M M3 Super 90 from CYMA is a spring-powered pump action shotgun which uses the Tokyo Marui Tri-shot system, meaning with each trigger pull you get 3 BBs headed downrange from 3 separate inner barrels, improving hit probability by providing a shotgun-like spread pattern.

We have seen Tri-shot shotguns before, and even M3 Super 90 style ones, so what makes this so special? Well, it is full metal, giving it a solid feel in the hands and a decent but not over-the-top weight, and CYMA has added a few frills to this ancient TM design to add extra realism for those that seek it, most notably the moving mock bolt carrier and charging handle, which has been omitted from Airsoft M3 Super 90 shotguns until now. If you have a taste for realism and you need a spring tri-shot to expand your arsenal this would be a great pick!

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you're looking for the ideal GBBR to base your custom build on, you just found it! The CYMA CGS 10.5" M4A1 CQB GBBR is based on the original M4A1 in CQBR configuration, with the classic ribbed handguards, L.E stock and A2 pistol grip. This means either you can run it plane Jane in the classic configuration or build your own custom GBBR without wasting high-end parts.

Not that this platform lacks high-end parts! Inside you will find the same majority steel internal parts and 6.04mm tightbore inner barrel as its Noveske and Daniel Defense cousins. The most important aspect of this GBBR is its internal system which is based on the Tokyo Marui ZET system and enhanced by CYMA's GBBR wing, known as CGS. If you like thunderous recoil, a full metal build and externals just waiting for your own custom touch, the CGS 10.5" M4A1 CQB GBBR is the one to go for!

If you are building a version 3 AK gearbox or you have an old AK AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AK AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AK doing its dirty work once again!

If you have had a mishap with your CYMA CM.028 and cracked the battery tray you aren't the first and you likely won't be the last! The CYMA Charging Handle Base/Battery Tray for CM.028 AK47 AEG is designed to replace the battery tray inside TM pattern AK rifles in the event that it gets broken or damaged. Nothing ruins your AK like the charging handle sliding around loosely in the receiver so if you have a CM.028 that is worse for wear this affordable replacement part could be the key to fixing it up!

If you're looking for a spiffy new flash hider for your SMG-5, you've come to the right page!

Constructed from sturdy alloy, this flash hider sports a birdcage style design, quickly and easily attached / detached using the handy tri-lug attachment system. This flash hider is designed for use with CYMA CM.041 models, however it should fit other brands of SMG-5.

If your CYMA CM.098 or CM.057 needs a revamp, the CYMA Stainless Steel Cylinder for CM.057 SVD & CM.098 SR-25 AEGs should be of use. This stainless steel cylinder is ribbed to promote heat dissipation and polished on the inside for minimal friction. 

This cylinder is a standard bore unported cylinder and is compatible with version 2 long gearboxes found in CA/A&K SR-25 AEGs and CYMA CM.098 SR-25 AEGs and also fits the Real Sword spec SVD gearbox used in the CYMA CM.057 SVD/SVU series and the Real Sword SVD Dragunov. 

If you've got leaky M4 ZET system mags, these could help fix them up! The CYMA CGS Enhanced M4 ZET System Gas Route Bucking 70 Degrees - Set includes 5 gas route buckings/seals for TM ZET system M4 GBBR magazines constructed from 70-degree hardness rubber for temperature resistance and improvements in strength. 

Not only a handy spare to have on hand for anyone with TM ZET system M4 magazines, these gas route buckings can also help improve gas efficiency by reducing gas leakage between the magazine and nozzle, especially if you've installed a CGS nozzle or bolt carrier group into your TM. The CGS Enhanced M4 ZET System Gas Route Bucking is compatible with Tokyo Marui and CYMA CGS M4 magazines and should also fit the Double Eagle M4 ZET system magazines. 

If you need a replacement bolt handle for your CM.707 Sniper rifle you are in luck! This CYMA part is an original replacement, intended for the refurbishment of an old and worn out sniper rifle. The handle is constructed from steel and does not include the polymer end piece so you will need the original end piece from your rifle to complete it.

If you need a set of backup iron sights to finish off your build, CYMA has something that might interest you! The CYMA Polymer Flip-up Iron Sight Set for 20mm Picatinny rails offer tool-less adjustment, ambidextrous flip-up buttons and compatibility with 20mm Picatinny rails, meaning they fit on any Airsoft rifle with 20mm rails, which these days is most of them!

The sights offer two rear apertures to aim with, a smaller one for semi-automatic fire and long-range use and a wider one which is well suited to full auto fire and low light conditions. The sights can be deployed by pressing the textured section at the front of each sight from either side, after which they can be manually raised into position. Adjustments can be applied via the dial on the right side of the rear sight, which will move the aperture from side to side, and in the centre of the front sight post which will raise and lower it for elevation adjustments.

While few people actually use their BUIS in-game other than in emergencies, a set of backup iron sights are one of those small details which really help finish off a realistic build. Give your primary a professional look with the added confidence that you can still aim, even if left your red dot sight turned on since the last game!

If you want to squeeze a bit more range from your CM.703 or CM.707 sniper rifle this upgrade kit will do it! The CYMA Upgrade Kit For CM.703/707 Sniper Rifle includes an aluminium piston, aluminium ball bearing spring guide and M175 main spring which should provide approximately 575 FPS with a 0.2g BB when installed in a rifle with good air seal.

As always, we recommend checking the FPS/joule limits of your local site before installing the spring, but the piston and spring guide can be used with the standard spring in your rifle to provide improved strength and long-term durability if your site limits your rifle to 500 FPS.

If you own an AK-47S underfolder AEG and you want to elevate its realism, a metal body kit is the key! The CYMA Metal Receiver for TM AK47S AEG is compatible with the CYMA CM.028S and Tokyo Marui AK-47S AEGs and will also fit others as long as they use the Tokyo Marui external design and have an underfolding stock.

The receiver is designed to match the original AK-47S "milled" receiver style, complete with weight-reducing cutouts at the front on either side, steel mock pins for some nice extra detail and engraved Cyrillic fire selector markings, an appropriate nod to realism. At the rear of the receiver, there are cutouts so an underfolding stock can be installed, and there are no conventional stock tangs on this receiver so it is not compatible with the full stock or side folding stock variants of the AK-47 AEG. If you want your AK-47S to be as its creator intended, this metal receiver kit is what you need!

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and you can choose between rear-wired and front-wired configurations. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

This SR25 Gearbox set by CYMA is designed to fit right into most SR25 / AR25 / AR10 style Airsoft Rifles / Guns. Included is a Piston, Cylinder, Gear Set, Tappet Plate, Nozzle. This GEARBOX set does not come with the shell, internals only.

If you want to add a modern touch to your AK, the CYMA Aluminium KeyMod Handguard for AK-47/74 is what you need! This CNC Aluminium handguard is equipped with KeyMod negative space attachment slots at 3, 6, & 9 o'clock with a 20mm Picatinny rail running along the top, ready for a PMC-style forward-mounted red dot sight. 

On each side, we are treated to a pre-installed 20mm Picatinny rail adapter for KeyMod, giving you the option of using more common 20mm Picatinny accessories or removing the adapters to mount more modern KeyMod solutions. The handguard itself is constructed in two parts, allowing you to use both or simply the upper or lower handguard, depending on your build requirements. If you're going for the modern tactical AK look, the CYMA Aluminium KeyMod Handguard for AK-47/74 is perfect for your build!