CYMA Airsoft

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.

If you're running the super cool CYMA CM.136 Grach EBB as your sidearm, this is the place to stow it! The CYMA Retention Holster for CM.136 Grach EBB Pistols is specifically designed for the CYMA CM.136, meaning no worries with compatibility and a flawless fit. This is a retention level 2 holster, meaning it requires the external button to be pressed to draw the pistol which results in greater security than level 1 holsters, ideal for aggressive skirmishers who get stuck right in!

The holster comes pre-fitted with a "paddle" mount attached via the common 30mm toothed rotary interface. The paddle mount fits practically any belt, from wide tactical belts to regular civilian belts and the rotary interface allows you to adjust the draw angle to suit your playstyle and work around anything else you may have on your belt kit. 

A massive advantage of the rotary interface is the wide variety of different wear options it provides, from MOLLE mounts to shoulder harnesses and drop leg panels. No matter how you plan to run your CM.136 Grach EBB, the CYMA Retention Holster is good to go!

If you want glowing BBs without making your primary any longer, the CYMA Tracer HOP-Up Chamber for M4/AR-15 AEGs is a great shout! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub. 

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself. 

While it is designed for use with the CM.097 series and other CYMA Platinum M4/AR-15 AEGs, this unit should work with most M4/AR-15 AEGs on the market, potentially requiring modifications to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your CQB primary with the CYMA Tracer HOP-Up Chamber for M4/AR-15 AEGs?

If you are looking for a cheap base gun for your dream sniper rifle build, this is ideal! The CYMA CM.701 Spring Bolt Action Sniper rifle is based on the popular R700 series of real steel bolt action rifles on the outside and is a clone of the Tokyo Marui VSR-10 Pro on the inside. The outer barrel and receiver are constructed from alloy and the stock is textured high density polymer, matching the metal proportions of the real thing perfectly.

On the inside, CYMA has generously added a 6.03mm tightbore inner barrel into the mix for improvements in accuracy and a slight FPS boost. Also present is a far stronger spring than in the Tokyo Marui version, the result of which is 500 FPS straight out of the box on a 0.2g BB. If you are building a beast of a sniper rifle, this would be a great start, just don't forget you will need an aftermarket 20mm Picatinny rail if you want to mount a scope!

A full metal spring powered pump action Airsoft 6mm shotgun that is tri-barrelled and comes with a sawn-off style pistol grip as standard.

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.

A 320rnd High Capacity Magazine for the CM.099 VSS Vintorez AEG, filled with BBs by pouring them into the Fill Window at the top of the Mag. A Clockwork Winding Wheel is turned at the base of the Magazine to start feeding BBs through the mechanism, just like any other Hi-Cap.

If you have lost or damaged your original AK AEG bolt carrier it will probably still work, but man, is it ugly! CYMA's Charging Handle/Mock Bolt for AK AEG is a drop-in replacement part which solves this aesthetic issue, providing a black-finished alloy mock bolt carrier mimicking the finish applied to the real AK-74 series bolt carriers. This part will fit almost all CYMA AK AEGs and should also fit others with TM AEG compatibility. 

A Tactical Suppressor for Airsoft AEG Rifles or Pistols rocking a 14mm CCW thread. This classic suppressor style will fit right on almost any Airsoft Assault Rifle!

This updated Airsoft Electric Pistol is roughly based on the comfortable EU Series, and offers a much better Rate of Fire and Performance than their standard equivalents. This version includes a MOSFET which 'amps' up the Performance with a faster Trigger Response, and the ability to dump an entire Magazine Fully Automatic in seconds.

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

This updated Airsoft Electric Pistol is roughly based on the comfortable EU Series, and offers a much better Rate of Fire and Performance than their standard equivalents. This version includes a MOSFET which 'amps' up the Performance with a faster Trigger Response, and the ability to dump an entire Magazine Fully Automatic in seconds.

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

Think AK, but bigger! The RPK is everything you love about the iconic AK, except it has been supersized. The CYMA CM.052 RPK-74 AEG is a faithful replica of the Russian support rifle. This AEG looks brilliant and shoots just as wonderfully, this is something that can be observed in all of CYMA's full metal AK platforms.

The CM.052 sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and authentic real wood furniture matching the iconic rifle that was issued to Russian armed forces. The RPK-74 takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45-round style high cap magazine which holds a stupendous 750 BBs!

If you've lost your mock cleaning rod, your AK will be looking odd! Here's what you need to fix that. The CYMA Mock Cleaning Rod for AK-47/74 AEG is designed for the CYMA CM.04x AK AEG series but should also fit other AKs from other brands which use the LCT or VFC build style. The rod is constructed from steel, and it goes without saying, you should never attempt to use this rod to clean the barrel of your Airsoft gun, it is only for the look!

If you want to speed up your shotgun skills, this is a sure fire way to do it! The Cyma Front Fibre Optic Sight simply snap fits onto your barrel to provide a bright red glowing point of aim, without the need for batteries or power at all! This sight can either be used with a rear sight or on its own for up close and personal work.

A pre-assembled, ready to use complete gearbox set designed for use in 6mm Airsoft BB replica M14 AEGs. With all the components assembled and in place, this gearbox is ready to be dropped into place in your M14 AEG, replacing any old and worn out gearboxes.

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

If you are the sneaky type of skirmisher and fancy using something Russian, the AKS-74U is calling your name! This bundle combines the superb CM.045A AKS-74U AEG from CYMA with a PBS-4 Suppressor and two spare 150rnd mid-cap magazines getting you ready to skirmish eastern style or as a mercenary/PMC. The PBS-4 is the caliber correct suppressor for the AKS-74U, giving you a professional setup which will impress the milsim inclined and avoid any of the "ACKCHYUALLY" moments. 

So you are after new magazines for your sneaky Russian DMR assault rifle thing? There's little point in having such a stealth-oriented setup if your magazines rattle! Introducing the 150rnd Mid-cap magazine for the CYMA CM.099 VSS Vintorez, granting you the capacity to compete but without the rattle of high-cap magazines. The magazine features reinforcement ribs on the outside which double as gripping surfaces, and is constructed from high-density polymer. These magazines fit and feed in the CYMA CM.099 VSS Vintorez but are not compatible with AK AEGs. 

An Alloy constructed Muzzle Brake for AK model replicas, which comes supplied with an adaptor to install it on any 14mm CCW thread.

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

A 6mm BB Airsoft Electric non-blowback Pistol, based on the iconic original 1911 pistol perfect for if you are wanting to get into Airsoft skirmishing. The CM.123 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to get a quick draw on an opponent. 

Designed to be easy to use, right out of the box, this electric Airsoft 6mm BB gun let's you get into battle right away.

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate pencil barrel and 2 position XM177 style stock, the CM.009D M653 is the old school tacticool carbine from a time before the M4!

Constructed from alloy, this is an Airsoft AEG replica of the OTs-03 SVU ‘Dragunov’ bullpup sniper rifle, the successor to the legendary 'Dragunov' SVD, first seen used by the Russian Federation in the First Chechen War.

If you have HOP-up woes with your SMG-5 this could be what you need to fix it up! The CYMA HOP-Up Chamber with Rubber and Nub for SMG-5 AEG is a replacement original part for the CM.027 SMG-5 series but should also work in any TM based SMG-5 AEG (not NGRS variants). The set includes a complete HOP-up unit with the HOP-up arm and also includes a basic HOP-up rubber and nub, giving you everything you need to replace the entire unit in a single package. 

This set is designed for the CM.027 which is a copy of the Tokyo Marui SMG-5 AEG and should also work with similar designs but is not compatible with the Classic Army SMG-5 or the later CYMA CM.041 series SMG-5 AEGs. 

If you're searching for more mags for your CM.136 EBB, here they are! CYMA's 15rnd Magazine w/ 11.1V 350mAh LiPo Battery for CM.136 Grach is loaded through the feed/fill window on the top using a speed loader or by hand, designed specifically for the CM.136 Grach EBB with an 11.1V LiPo battery built-in. 

The integral battery is charged using the cable included with your CM.136 via the charging port on the baseplate. As with all LiPo batteries, this battery MUST be charged using a LiPo balance charger through the balance port. Standard LiPo safety applies, including not leaving your battery charging while unattended and always using a battery charging bag. Keep your super fun EBB Grach running for longer in-game with the CYMA 15rnd Magazine w/ 11.1V 350mAh LiPo Battery for CM.136 Grach!

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear. 

If you are a real Dragunov fan, nothing beats steel and real wood! The CYMA CM.057 is widely known to be the best replica of the iconic Dragunov SVD DMR rifle and this version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first issued. The CM.057 boasts full metal construction with a large proportion of steel in its build, giving it a reasonable and realistic weight without making this Dragonov a drag (hehe) to carry around all day!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD a great base platform for a DMR build. If you are after a long-range platform and want something with hints of modernity combined with the retro looks of real wood, the CM.057 should be at the top of your list!

A Medium Capacity Magazine for the CYMA CM.033 Thompson / M1A1, that holds a total of 60rnds and will feed BBs into your replica until empty, without the annoying rattle of High Cap Magazines. It is filled from the top using a Speedloader to force BBs into place, and is constructed to a tough standard using Polymer. As a final party trick, these Magazines are compatible with Tokyo Marui replicas as well.