ASG Airsoft

A gas grenade (AKA Moscart) for Airsoft punches out 90 rounds per shot. A new and unique design capable of firing all 90 rounds with sheer force. Each shell can be loaded in under 2 minutes with no use of a speed loader. Excellent for CQB arenas and close quarter battles outdoors.

A replacement Hop-Up Unit for Airsoft AK Rifles, designed and constructed to high standards by Action Sports Games in Denmark as part of their Ultimate Upgrade Parts Range. 

A low capacity AR36 magazine from ASG, with a transparent Polymer casing and dummy rounds which can be seen through the case.

A Co2 Magazine designed for the CZ P-09 Gas Blowback Airsoft Pistol. The magazine is constructed from Alloy, with Polymer Feed Lips, BB Guide and Base Plate. 

A 1x red dot sight, providing a red dot for aiming. This sight provides a red dot sight with no magnification which provides quick target aquisition whilst in the field, allowing for two eye open targeting. 

A high quality very compact Airsoft Red Dot Sight that is suitable to fit any Airsoft 20mm RIS/RAS rail section. Ideal for pistols, compact SMG and low profile rail systems. 

This mini Airsoft Red Dot Sight also comes with a protective Polymer casing that is excellent when storing and transporting your AEG or Optic if you keep it separate from your Airsoft Gun. Windage and Elevation is also easily adjustable for sighting in your Airsoft gun any time of the day.

A 50rnd Extended Gas Magazine for a range of ASG Gas Replicas, including the B&T USW, the Shadow 2, SP-01 and CZ 75. If you own one of these replicas and want the ability to throw 50 BBs down range in a hurry, then the firepower increase of a 50rnd Magazine cannot be overstated.

A set of both thick and thin shims, useful for ensuring your gearbox turns over as smooth as possible.

A pair of 20mm RIS compatible raised scope mount rings, designed to raise up optics to the user's eye-level, or fit larger scopes onto their Airsoft guns. 

Super conductive and easy to route throughout your gearbox and rest of your Airsoft AEG.

A replacement Trigger for the Scorpion Evo, which is designed to be dropped into the gun and decrease the amount of travel time in the trigger, allowing for faster repeat shots. 

If you're wanting some serious carnage, that is sure to put a big grin on your face, this grenade launcher should be right up you're alley.

With it's standalone design featured in such iconic films as the John Wick series, it takes 40mm MOSCART allowing you to shower your targets in a wall of BBs.

Featuring an alloy barrel and high density body, it comes complete with a foldable stock, removable foregrip. Time to cause some havoc!

The ASG P-09 has been a sure choice for Airsofters since it's inital release way back when. It has established itself as a Pistol of choice for IPSC/Target Shooters, as well as Airsoft players running modern loadouts. This update to the Pistol offers an 'Optics Ready Slide', which has a Mount Plate for a Dr. Sight or similar Compact Red Dot Sight. It also includes High Profile Ironsights so that you can still use them if you install a Red Dot Sight on the Slide, as well as a Vented Slide and gorgeous Gold Threaded Barrel. Powered by CO2, this is a ferious Pistol with a strong Blowback that will perform really well in all weather conditions.

A 29-round magazine designed primarily for use with the ASG Challenger XP17 series of pistols.

The ASG SAKO TRG M10 follows the ASG tradition of offering high end Airsoft sniper rifles with full real steel licencing as an alternative to the lightweight and skirmish focussed VSR style platforms. Equally at home in the hands of a sniper as it is in the collection of a skirmisher who values realism, this SAKO TRG M10 replica boasts full metal construction, a whopping 610mm long 6.03mm tightbore inner barrel and a unique dial adjustable HOP-up with a secondary screw to adjust the HOP-up from left to right!

The unique HOP-up system is just the tip of the iceberg when it comes to the innovative features of the ASG SAKO TRG M10 which benefits greatly from being based on a unique high end real steel precision rifle. As one would expect, the TRG has a CNC machined free-floated handguard, fluted outer barrel, ergonomic pistol grip and well designed ambidextrous controls, but what you might not expect is the functional loaded chamber indicator and fully adjustable trigger, bringing much sought-after real steel features into the Airsoft world. If you are a sniper with a desire to skirmish a highly realistic and fully licenced platform this is one of the best we have seen yet!

If you have a damaged wire, snapped motor connector or just want to improve your electric conductivity then this pack is ideal.

A Glass Nylon Fiber constructed Magwell adapter for the ASG Scorpion Evo, which serves as a reference point for your lead hand, and makes guiding a fresh Magazine into the Magwell much easier to perform from memory, allowing you to focus your attention solely on the battlefield where it belongs.

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

Everyone's favourite Puppy-Avenging Pistol is back with a bang, and freshly updated for modern Competition Shooters with a CO2 Magazine out of the box, and a refined and newly cut Slide to reduce overall weight and take its performance into overdrive. If you're looking for a Pistol that is going to make a statement, this is definitely it.

If you have an SSG 69 or M40A3, it's time to give it a bit more range, accuracy and power!

A must have set for any Airsofter and Air Pistol Dan Wesson Revolver owner.

A Gas blowback magazine designed as a replacement or spare for the KC-02 Special Teams Carbine licensed by ASG. With a an ammunition capacity of up to 29 rounds. 

A multipack of magazine for the ASG Scorpion Evo. These new magazines from ASG allow you to insert your own decals to make your magazines look more realistic. 

If you like the CQR look and have a sneaky playstyle this bundle should suit you well! The ASG HERA ARMS Covert OPS Pack comprises the impressive ASG HERA ARMS CQR AR-15 Milspec SSS Edition Rifle, the ASG B&T Rotex-V Mock Suppressor, a Theta Optics Red Dot and two 140rnd NUPROL Mid-Cap Magazines. All you need to get shooting with the CQR is your choice of battery, charger and eye protection!

A Scope Mount designed for Airsoft Sights and Scopes which offsets Sights and Scopes allowing their Eye relief to be adjusted even with minimal rail space. 

A set of two rubberised and textured rail covers for M-LOK rail systems.

A vital spare for Version 3 gearboxes.

A replacement / spare for stock or damaged bearing in Version 6 (V6) and Version 7 (V7) Gearbox. In gearbox spring guides are designed to help the spring in its correct position. 

A magazine for the VFC McMillian M40A3 6mm BB Spring Action Sniper Rifle and holds up to 20 BBs at a time.

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.