ASG Airsoft

If you have a damaged wire, snapped motor connector or just want to improve your electric conductivity then this pack is ideal.

A hard plastic case designed to hold ASG's Dan Wesson Revolver. The case is constructed from Polymer and features laser cut foam inside specifically shaped to the pistol for an extra snug fit.

A one point sling designed for MP9 gas blowback submachine guns, with a quick release clasp for easy handover to a marshal or other player.

Everyone's favourite Puppy-Avenging Pistol is back with a bang, and freshly updated for modern Competition Shooters with a CO2 Magazine out of the box, and a refined and newly cut Slide to reduce overall weight and take its performance into overdrive. If you're looking for a Pistol that is going to make a statement, this is definitely it.

A low capacity AR36 magazine from ASG, with a transparent Polymer casing and dummy rounds which can be seen through the case.

A high quality very compact Airsoft Red Dot Sight that is suitable to fit any Airsoft 20mm RIS/RAS rail section. Ideal for pistols, compact SMG and low profile rail systems. 

This mini Airsoft Red Dot Sight also comes with a protective Polymer casing that is excellent when storing and transporting your AEG or Optic if you keep it separate from your Airsoft Gun. Windage and Elevation is also easily adjustable for sighting in your Airsoft gun any time of the day.

A semi transparent magazine coupler allowing you to connect your ASG CZ Scorpion Evo magazines together for faster reloading.

If you're looking for a holster for your Dan Wesson hand cannon, this will do the trick! The ASG Belt Holster for Dan Wesson 715 6" & 8" Revolver fits both the Airsoft and Airgun versions of the Dan Wesson 715, specifically the 6-inch and 8-inch barrel versions. Made from form-moulded real leather with a soft inner lining, this holster will fit your 715 like a glove and keep its phenomenal finish intact and scratch-free!

The Belt Holster mounts to any belt of under 2 inches in width, though it is unlikely to fit chunky battle belts and MOLLE belts. Your 715 is secured by a snap-button/velcro-secured thumb break which can be removed entirely for a faster draw with the balancing factor of slightly less security during movement. Whether you're shooting targets or skirmishing with your wheel-gun, the ASG Belt Holster for Dan Wesson 715 6" & 8" Revolver is the perfect holster!

An incredibly unique and simple Airsoft pistol, this almost silent non-blowback handgun is the ultimate sneaky Airsoft sidearm. Based on the MK2 Ruger and featuring an alloy exterior, this is excellent for garden shooting and as a long range DMR pistol.

A Gas powered non-blowback CO2 Airsoft 6mm BB revolver created by ASG with their brand new design, transforming the Dan Wesson range of revolvers from 'Party Piece' to 'skirmishable platform'. This set is supplied with high-power shells so if you're hitting the field with this wheelgun, pick up some Power Down Shells to keep the marshalls happy!

If you have an SSG 69 or M40A3, it's time to give it a bit more range, accuracy and power!

A must have set for any Airsofter and Air Pistol Dan Wesson Revolver owner.

An ideal battery for those who have very limited space or for those who have a front wired PEQ box style setup or RC cars. With a 1000mAh 30C discharge expect a good rate of fire but 2 or 3 are recommended for a full day of constant shooting.

A Gas blowback magazine designed as a replacement or spare for the KC-02 Special Teams Carbine licensed by ASG. With a an ammunition capacity of up to 29 rounds. 

If you're wanting some serious carnage, that is sure to put a big grin on your face, this grenade launcher should be right up you're alley.

With it's standalone design featured in such iconic films as the John Wick series, it takes 40mm MOSCART allowing you to shower your targets in a wall of BBs.

Featuring an alloy barrel and high density body, it comes complete with a foldable stock, removable foregrip. Time to cause some havoc!

A pack of 10 Rubber Stop Caps for ASG 40mm Airsoft Grenades, which simply fit into the top of the Shell once they are filled with BBs. 

A 50rnd Extended Gas Magazine for a range of ASG Gas Replicas, including the B&T USW, the Shadow 2, SP-01 and CZ 75. If you own one of these replicas and want the ability to throw 50 BBs down range in a hurry, then the firepower increase of a 50rnd Magazine cannot be overstated.

A stiff but flexible molded Retention Holster for the ASG Shadow 2 Gas Blowback Airsoft Pistol. This Holster will attach over your belt to securely hold the Shadow 2 on your hip, not releasing it until you press the Release Button on the side of the Holster.

The ASG Dot Sight is a red/green dot sight designed to allow you to engage the enemy more quickly and effectively than with standard iron sights. This works by projecting a red or green dot on the internal lens of the sight, meaning all you have to do to make the hit is line the dot up with the target and pull the trigger! 

If you find the red dot is off when you take your first shot, no need to worry, the sight can be zeroed using the dials on the top and sides for perfect precision. Compatible with any 20mm Picatinny rail thanks to its included one-piece mount, the ASG Dot Sight is a cost-effective piece of kit with unique styling!

A Green Gas powered Spare Magazine for the ASG STI Combat Master Pistol. If you own one of these Sidearms, chances are you're a fan of the film. If you're a fan of the film, chances are you're going to want to fling Magazines all over the place. Stock up on Spare Mags today to give you the best chance of avenging your pupper, and so you can spend more time playing, and less time back in the safe zone reloading.

The ASG Urban sniper spring sniper rifle magazines made from Polymer and holds up to 30 6mm Airsoft BBs at a time. Easy to adjust with a side press button release catch and compact for easy storage during mid game use. 

The perfect option for snipers who want to spend more time concealed in their hide and less time frantically scrambling around for a speed loader to reload their magazines - giving away your position. 

If you're a true Sniper, then each one of these magazines has a potential for 20 kills.

An official spare sling hook, allowing for the replacement of the lost or broken part of your Airsoft Scorpion Evo. 

A replacement / spare for stock or damaged bearing in Version 6 (V6) and Version 7 (V7) Gearbox. In gearbox spring guides are designed to help the spring in its correct position. 

A 20mm RIS lower mounted point designed to stop the operator of the weapons' hand from sliding forward in front of the barrel. 

A mock Airsoft suppressor designed specifically for the MP9 GBB submachine gun, featuring genuine Brugger & Thomet AG licensed trademarks.

A Glass Nylon Fiber constructed Magwell adapter for the ASG Scorpion Evo, which serves as a reference point for your lead hand, and makes guiding a fresh Magazine into the Magwell much easier to perform from memory, allowing you to focus your attention solely on the battlefield where it belongs.

A Scope Mount designed for Airsoft Sights and Scopes which offsets Sights and Scopes allowing their Eye relief to be adjusted even with minimal rail space. 

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

If you're looking for a unique muzzle device to top off your build, check this out! The ASG Flash Hider for EVO Carbine; 14mm CCW is constructed from aluminium and has a unique, slanted design with aggressive ports on each side. 

While it is designed for the ASG CZ Scorpion EVO 3 A1 it can be mounted on anything with a 14mm CCW male threaded barrel, so go wild!

The perfect pouch for speedy revolver shenanigans! The Dan Wesson Revolver Speed loader pouch from ASG can hold a single 6 shot revolver speed loader and is an open-topped design for fast access. The pouch is constructed from rigid woven fabric and provides decent retention, meaning your speed loader will not fly out during a sprint! This pouch has a velcro loop at the rear for attachment, is compatible with standard belts (maximum 2-inch width), and can also be attached to MOLLE webbing loops. If you are building your Revolver Ocelot loadout, or you just fancy trying some speedy revolver trick shooting, this pouch will serve you well!