All Airsoft Guns

If you are looking for a pump action shotgun to lay down the law in CQB this is one of our favourites! The CM.360M M3 Super 90 from CYMA is a spring-powered pump action shotgun which uses the Tokyo Marui Tri-shot system, meaning with each trigger pull you get 3 BBs headed downrange from 3 separate inner barrels, improving hit probability by providing a shotgun-like spread pattern.

We have seen Tri-shot shotguns before, and even M3 Super 90 style ones, so what makes this so special? Well, it is full metal, giving it a solid feel in the hands and a decent but not over-the-top weight, and CYMA has added a few frills to this ancient TM design to add extra realism for those that seek it, most notably the moving mock bolt carrier and charging handle, which has been omitted from Airsoft M3 Super 90 shotguns until now. If you have a taste for realism and you need a spring tri-shot to expand your arsenal this would be a great pick!

If you're looking for a target-shooting pistol with realistic features, the UMAREX GLOCK 17 Gen.5 CO2 Target Shooting Pistol; MOS is one to watch. This full-metal Glock Gen.5 MOS replica is a little different, making use of a unique internal system based on UMAREX's airgun line, though it is still chambered in 6mm Airsoft BBs. This means it hits out at an astonishing 400 FPS on 0.2g BBs approximately, promising maximum effect on target but making it unsuitable for Airsoft skirmishing. 

Externally, the GLOCK 17 Gen.5 CO2 Target Shooting Pistol boasts forward slide serrations and an optics-ready slide, meaning you can add a micro red dot sight with a Umarex Adapter plate (available separately). Licenced Glock trademarks are present across the design, giving you the elite look and maximum realism. The frame is a perfect match for the real Gen.5 Glock, with the exception of the disassembly levers and right side slide lock/release catch which are moulded in and non-functional. 

When fired, this Glock is positively ferocious, with snappy, jarring recoil and a violent action a bit more potent in the recoil department than most Airsoft Glock replicas. Build quality is also top-notch, making use of a well-finished alloy slide and outer barrel along with a solid, matt finished high density polymer frame. If you're looking for a purebred steel ringer with maximum effect on target, the UMAREX GLOCK 17 Gen.5 CO2 Target Shooting Pistol; MOS is a fine choice!

If you're looking for a target-shooting pistol with realistic features, the UMAREX GLOCK 17 Gen.5 CO2 Target Shooting Pistol is what you need. This full-metal Glock 17 Gen.5 replica is a little different than the usual Airsoft Glock replica, making use of a unique internal system based on UMAREX's airgun line, though it is still chambered in 6mm Airsoft BBs. This means it hits out at an astonishing 400 FPS on 0.2g BBs approximately, promising maximum effect on target but making it unsuitable for Airsoft skirmishing.

Externally, the GLOCK 17 Gen.5 CO2 Target Shooting Pistol boasts forward slide serrations and licensed Glock trademarks across the design, giving you the elite look and maximum realism. The frame and slide are a perfect match for the real Gen.5 Glock, with the exception of the disassembly levers and right side slide lock/release catch which are moulded in and non-functional.

When fired, this Glock is positively ferocious, with snappy, jarring recoil and a violent action a bit more potent in the recoil department than most Airsoft Glock replicas. Build quality is also top-notch, making use of a well-finished alloy slide and outer barrel along with a solid, matt finished high density polymer frame. If you're looking for a purebred steel ringer with maximum effect on target, the UMAREX GLOCK 17 Gen.5 CO2 Target Shooting Pistol will do what you need it to!

If you're looking for a target-shooting pistol with realistic features, the UMAREX GLOCK 17 Gen.5 CO2 Target Shooting Pistol is what you need. This full-metal Glock 17 Gen.5 replica is a little different than the usual Airsoft Glock replica, making use of a unique internal system based on UMAREX's airgun line, though it is still chambered in 6mm Airsoft BBs. This means it hits out at an astonishing 400 FPS on 0.2g BBs approximately, promising maximum effect on target but making it unsuitable for Airsoft skirmishing.

Externally, the GLOCK 17 Gen.5 CO2 Target Shooting Pistol boasts forward slide serrations and licensed Glock trademarks across the design, giving you the elite look and maximum realism. The frame and slide are a perfect match for the real Gen.5 Glock, with the exception of the disassembly levers and right side slide lock/release catch which are moulded in and non-functional.

When fired, this Glock is positively ferocious, with snappy, jarring recoil and a violent action a bit more potent in the recoil department than most Airsoft Glock replicas. Build quality is also top-notch, making use of a well-finished alloy slide and outer barrel along with a solid, matt finished high density polymer frame. If you're looking for a purebred steel ringer with maximum effect on target, the UMAREX GLOCK 17 Gen.5 CO2 Target Shooting Pistol will do what you need it to!

If you're looking for a target-shooting pistol with realistic features, the UMAREX GLOCK 17 Gen.5 CO2 Target Shooting Pistol is what you need. This full-metal Glock 17 Gen.5 replica is a little different than the usual Airsoft Glock replica, making use of a unique internal system based on UMAREX's airgun line, though it is still chambered in 6mm Airsoft BBs. This means it hits out at an astonishing 400 FPS on 0.2g BBs approximately, promising maximum effect on target but making it unsuitable for Airsoft skirmishing.

Externally, the GLOCK 17 Gen.5 CO2 Target Shooting Pistol boasts forward slide serrations and licensed Glock trademarks across the design, giving you the elite look and maximum realism. The frame and slide are a perfect match for the real Gen.5 Glock, with the exception of the disassembly levers and right side slide lock/release catch which are moulded in and non-functional.

When fired, this Glock is positively ferocious, with snappy, jarring recoil and a violent action a bit more potent in the recoil department than most Airsoft Glock replicas. Build quality is also top-notch, making use of a well-finished alloy slide and outer barrel along with a solid, matt finished high density polymer frame. If you're looking for a purebred steel ringer with maximum effect on target, the UMAREX GLOCK 17 Gen.5 CO2 Target Shooting Pistol will do what you need it to!

If you're looking for a target-shooting pistol with realistic features, the UMAREX GLOCK 17 Gen.5 CO2 Target Shooting Pistol is what you need. This full-metal Glock 17 Gen.5 replica is a little different than the usual Airsoft Glock replica, making use of a unique internal system based on UMAREX's airgun line, though it is still chambered in 6mm Airsoft BBs. This means it hits out at an astonishing 400 FPS on 0.2g BBs approximately, promising maximum effect on target but making it unsuitable for Airsoft skirmishing.

Externally, the GLOCK 17 Gen.5 CO2 Target Shooting Pistol boasts forward slide serrations and licensed Glock trademarks across the design, giving you the elite look and maximum realism. The frame and slide are a perfect match for the real Gen.5 Glock, with the exception of the disassembly levers and right side slide lock/release catch which are moulded in and non-functional.

When fired, this Glock is positively ferocious, with snappy, jarring recoil and a violent action a bit more potent in the recoil department than most Airsoft Glock replicas. Build quality is also top-notch, making use of a well-finished alloy slide and outer barrel along with a solid, matt finished high density polymer frame. If you're looking for a purebred steel ringer with maximum effect on target, the UMAREX GLOCK 17 Gen.5 CO2 Target Shooting Pistol will do what you need it to!

If you're looking for a compact and lightweight AR platform which is perfect for close-quarters engagements, the Specna Arms SA-C12 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C12 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're looking for a compact and lightweight AR platform which is perfect for close-quarters engagements, the Specna Arms SA-C12 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C12 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

A gas blowback 6mm Airsoft BB Gun, based on the Hi-Capa 3.8 range this is a custom pistol designed to look as unique and modern as possible whilst still retaining all of its key features.

An electric powered 6mm Airsoft M4 styled weapon that is majoritively made from high density Polymers to keep the weight down, and after a few hours of carrying around you'll be thanking them for it!

Based on the iconic pistol used by the US Armed Forces, this Airsoft replica B92 features white dot ironsights and diamond textured pistol grip for extra comfort. This pistol is great for those tight CQB situations where you need the extra manoeuvrability or for those times you need to get a quick draw on somebody.

WE Europe are known for their punchy gas blowback recoil, that is more gas efficient with quicker cycling speeds than other brands and the B92 is no exception!

If you need a gun on your gun so you can shoot while you shoot, the S&T G316 Grenade Launcher is ideal! This imposing piece of equipment is designed for AR36 platform Airsoft guns, and will install in place of your handguard to provide an awesome under barrel 40mm Grenade Launcher for you to effortlessly fire Airsoft MOSCART Grenades from underneath your Assault Rifle. 

The included handguard is designed to replace either the K or the E (full-length) AR36 handguards, so if you want to add it to your AR36C you will most likely need a barrel extension to clear the handguard. If you want a serious firepower upgrade for your AR36, then the S&T G316 Grenade Launcher is just what you were looking for!

If you're put off full metal SMG-5s because of their immense weight, this high density polymer alternative should suit you perfectly! The Jing Gong SMG-5 A5 RAS replicates the iconic SMG design in its RAS configuration, with 20mm Picatinny rails at 3, 6 and 9 o'clock on the handguard, ready for your mission essential accessories. Up front, we have a QD flash hider mounted to a threaded tri-lug muzzle device, giving you loads of tracer and suppressor mounting options straight out of the box.

On the inside, the G.E SMG-5 is modestly equipped but surprisingly potent for the price. The internals are based around the Tokyo Marui SMG-5, meaning a version 2 gearbox, slider adjustable HOP-up unit and full compatibility with aftermarket TM spec upgrade parts. Improving on the original TM design, Jing Gong has added 7mm ball bearing bushings into the mix for reduced friction, increased rate of fire and a smoother gearbox report. Another nice little sweetener is the platform's 6.03mm tightbore inner barrel which raises FPS and improves accuracy, saving you a few quid when it comes time to upgrade!

If you ever thought the EU series was falling behind the Hi-capa platform as far as options are concerned, think again! Introducing the EMG SAI BLU, an enhanced EU17 pistol with all the bells and whistles! The SAI BLU sports a tactical slide with front and rear serrations, raised suppressor height sights, a threaded barrel with 14mm CCW adapter, and the ability to mount a red dot sight with any of the included 4 mounting plates!

An Airsoft Electric Gun based on the M4 platform, which offers Zinc/Aluminium externals, microswitch trigger, a quick change spring system and top spec components in one rock-solid package.

If you have caught AR-9 fever (it's contagious!) but you want something realistic, and ultra-compact, EMG has something for you to take a look at! The Angstadt Arms SCW-9 is a modern AR-9 platform designed to be as compact as physically possible for concealability when used by close protection details and bodyguards and fortunately for us, this translates directly into a seriously competitive CQB platform that is probably the most compact option on the market right now. 

This pocket-sized M4/AR15-derived submachine gun features full metal construction, a female threaded outer barrel complete with14mm CCW male thread adapter and an in-line MOSFET which pairs well with the microswitch trigger to provide a snappy response for some rapid double taps in CQB. All of the controls are either ambidextrous or extended, making for a familiar but enhanced feel for M4 users, and its innovative compact PDW stock makes this tiny boi barely bigger than a pistol. If you want the edge when it comes to challenging CQB scenarios, the SCW-9 would be a great choice!

An absolutely stunning and hefty electric powered Airsoft 6mm replica based on a world-famous Navy Seals favourite. As you would expect from Specna, this replica doesn't compromise on quality, inside or out!

Authentic and gorgeous, this is the first thought you should have when looking at this real wood A&K Dragunov SVD Sniper Rifle. A replica of the renowned Russian marksman rifle, this AEG looks seriously badass! This version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first produced for the Russian military in 1963. This Dragunov boasts full metal construction with some steel parts as well, giving it a reasonably realistic weight without making it a pain to carry around all day!

It features a custom gearbox and a 6.03mm diameter barrel. This, paired with the Dragunov's neodymium motor and 590mm inner barrel, means it can pack quite a punch and a superior range. The A&K Dragunov would be an excellent platform for a DMR or sniper rifle loadout, just like its real-world utilisation. If you are looking for a long-range platform that has an authentic and iconic look, with real wood and steel, then the A&K Dragunov SVD Sniper Rifle should be in your sights!

If your collection is full of short, lightweight CQB AEGs and you have been feeling the draw towards a big, long rifle for some outdoor BB slinging, we have just what you have been looking for! The JG1404 M14 EBR is a close reproduction of the M14 Enhanced Battle Rifle, issued to US Army and Special Forces troops during the Iraq and Afghanistan conflicts. This rifle is a big boy, tipping the scales at 5.4kg with a lengthy 500mm inner barrel and the impressive M14 "V-HOP" system copied from the superb Tokyo Marui M14, giving this platform excellent potential to become a DMR rifle!

The UMG models are great, but wouldn't it be great if we just had something a little more modern? Introducing the G&G PCC45, the 21st Century rendition of the very tired UMG style platform. 

It's so hard to find a unique looking M4/AR-15 AEG these days, thankfully companies such as APS have not lost their creative spark! The Ghost Patrol Phantom M4/AR-15 AEG is a CQBR length rifle with an M-LOK handguard, sound amplifying muzzle device, a well-built gearbox with a quick change spring system and an electronic trigger unit pre-installed housed inside a redesigned receiver with some superb modern touches, both stylistic and functional. The Phantom also sports ambidextrous controls, and programmable fire selector modes thanks to the APS SDU 2.0 MOSFET which allows for burst modes of varying duration to be set.

If you want to start your Airsoft journey with something that shoots a little better than the usual beginner platform, this bundle is ideal. The Silent OPS CQB Bundle is based around the pre-upgraded DA-B03-ETU with its integral suppressor, hybrid aluminium/high-density polymer build and programmable fire controls including burst mode, pre-cocking and binary trigger. 

We paired the DA-B03-ETU with 2 spare mags, BBs and a speed loader so you can keep it topped up, a Red Dot Sight for fast target acquisition (lens protector recommended) and a LiPo battery, charger and charging bag to keep it fueled.

This setup would be ideal for a sneaky CQB specialist or an aggressive outdoors skirmisher who wants to start with the edge over other newcomers. The DA-B03-ETU is a cut above standard beginner AEGs thanks to its electronic trigger unit which gives it a frightening semi-auto trigger response and killer rate of fire!

If you're after an MK18 and a full complement of accessories, this is what you need! The Delta Armory MK18 BRAVO™ Binary Bundle pairs the Delta Armory DA-B15-ETU MK18 with 2 extra magazines, a red dot sight (lens protector recommended), BBs, a speed loader, LiPo battery, charger, and a battery charging bag, giving you everything you need to get going with a slick Military style setup!

This bundle is named for the Binary Trigger function of the pre-installed ETU system inside the MK18, though it can also provide burst mode and pre-cocking for a faster trigger response. If you do a mix of indoor and outdoor skirmishing, this setup will see you well-equipped!

Built by G&G from the ground up this weapon is rather unique, based on a .308 styled AR receiver this weapon really stands out from the crowd with its' larger profile and magazines.

If you're sick and tired of seeing the usual M4 and AK variants, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) should excite you! This interesting and unique bullpup design is based on a real steel prototype designed in Germany by Otto Repa, known as the SOC SLR. This variant is the AR-SOC, the assault rifle variant and is the ideal primary to pair with a sci-fi-style loadout which requires a plausibly realistic platform which doesn't look like any rifle issued in the current day.

Inside, we have a unique gearbox shell with wide parts compatibility with version 2 gearbox internals. The Ares EFCS MOSFET is also present inside, allowing for the AR-SOC's super satisfying 2-round burst mode and super snappy trigger response. The EFCS also provides programmable fire modes through the Ares EFCS Programming Box (available separately) and also provides cycle control, meaning you'll never get a trigger lockup with the AR-SOC no matter how fast you pump out those semi-auto shots.

We think the AR-SOC would be a fantastic stand-in for the Helldivers 2 Liberator assault rifle but also looks straight out of Halo! If your next move is to build a mould-breaking sci-fi loadout, the Ares Otto Repa SOC SLR Assault Rifle AEG (AR SOC) is the perfect primary!

The LCK-15 is an Airsoft Electric Gun based on the AK-15, which is a modernisation of the AK platform that went through many iterations and updates to counter issues, until the AK-12 and AK-15 were finalised.

If you feel the need for recoil, this bundle was made with you in mind! The BERETTA PMX Gas Blowback Bundle pairs the hard-kicking PMX SMG with 2 spare magazines, a can of NUPROL 2.0 green gas and Delta Armory 0.28g BBs, giving you everything you need to get busy with this Spicy Meatball of a GBB SMG!

The Heckler & Koch G3.

Possibly one of the most authentic & iconic firearms in the world, the H&K G3 has lived through some of the most famous wars of all time and is certainly a platform to be appreciated. Now the time has come for you to get your hands on one of the most awesome Gas Blowback Airsoft Replica's and take the skirmish by storm, H&K Style!

If you're into compact sidearms but want a stylish, custom look, the RAVEN Hi-Capa 3.8 Pro GBB Pistol w/Red Dot Sight should suit your needs. This full-metal Hi-Capa platform is as compact as Hi-Capas get, with a 3.8-inch outer barrel and shortened slide, resulting in improved gas efficiency, slide speed and a faster draw from a holster. 

The 3.8 Pro is available in either chrome silver or metallic gold, giving your sidearm a side of style to make it pop next to boring black pistols. When it comes to sights, the 3.8 Pro is remarkably well-equipped, boasting light-enhancing iron sights with green inserts and a pre-installed "BDS" red dot sight, ideal for fast target acquisition and low light skirmish scenarios. As with other RAVEN Hi-Capas, the 3.8 Pro is also rocking a 6.03mm tightbore inner barrel, giving you an accuracy edge you really don't deserve for this price! 

Based on the M45A1 CQBP, which was based on the MEU (SOC) US Marines adaption of the 1911 pistol, this Airsoft Replica Ticks all the boxes. With a solid full Alloy Construction, Tactical Grips and 20mm Pistol Rail, what more could you ask for?