Airsoft Clearance Sale

A lightweight, warm and comfortable Mid-Layer Jacket for Airsoft or other Outdoor/Hiking uses, that is made with a combination of Grid Fleece and Softshell material. The Grid Fleece core keeps your body warm, whilst remaining breathable, whereas the Softshell material offers some Water Resistance for when the rain hits. Whether you need a walking jacket or you want to make this part of your Airsoft loadout, the Highlander Tactical Hirta Hybrid will do you proud.

If you are creating a lightweight summer loadout a belt kit would be a superb choice for extra comfort and heat dispersion in the warmer months. The EmersonGear Modular MOLLE tactical belt is a two part belt system, and includes the inner belt, which threads through the belt loops of your trousers and the outer belt which mounts over the top via velcro and a strong polymer buckle at the front. The inner belt is rigid and keeps its shape well, and the outer belt sports two rows of MOLLE attachment loops with plenty of space for pouches, holsters and other equipment. This belt is sized to fit a waist size of 38"-43" approximately.

This Hard Case is manufactured from seriously tough but lightweight Polypropylene (PP) + Glass Fibre material, and has deep dimensions but a modular design that allows you to stack multiple cases together. Tested by a third party quality-assurance Company, these cases are rated to prevent the ingress of Water and Dust, protect against hard Impacts and Extreme Temperatures.

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

An efficient and well-constructed Air Nozzle which is available for a wide range of replicas, and ensures improved durability and smooth operation.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

The Ironclad is a wide and deep Hard Case made from seriously strong Polypropylene (PP) + Glass Fibre filled with four layers of Pick and Pluck Foam, so that you can customise it to suit your needs perfectly. With a Water and Dustproof seal, IP67 Waterproof Rating, Crush and Impact protection as well as Extreme Temperature performance and a Pressure Equaliser Valve, this is the best way to protect important items during transit and storage.

An Airsoft Magazine designed for use with Tokyo Marui's Recoil Shock Airsoft TM 417 6mm BB Guns. The magazine is constructed entirely from Heavy Duty Polymer, and features a Transparent Black Shell allowing the user to see through to the Internal Mock rounds which add Realism to the Magazine.

Introducing a backpack that seemingly does it all. The STOIRM Tactical Backpack keeps you equipped on the move, with a huge full clamshell main compartment, full MOLLE and Velcro backed front compartments and a hardened upper most compartment, all double zipped. 

If that wasn't enough, it features two elasticated side pouches and a host of interior features such as two rear facing zip pockets. The Velcro divided rear section and a fully modular Velcro attached interior MOLLE system gives you a huge level of customisation so you can weather any STOIRM!

Introducing a backpack that seemingly does it all. The STOIRM Tactical Backpack keeps you equipped on the move, with a huge full clamshell main compartment, full MOLLE and Velcro backed front compartments and a hardened upper most compartment, all double zipped. 

If that wasn't enough, it features two elasticated side pouches and a host of interior features such as two rear facing zip pockets. The Velcro divided rear section and a fully modular Velcro attached interior MOLLE system gives you a huge level of customisation so you can weather any STOIRM!

Introducing a backpack that seemingly does it all. The STOIRM Tactical Backpack keeps you equipped on the move, with a huge full clamshell main compartment, full MOLLE and Velcro backed front compartments and a hardened upper most compartment, all double zipped. 

If that wasn't enough, it features two elasticated side pouches and a host of interior features such as two rear facing zip pockets. The Velcro divided rear section and a fully modular Velcro attached interior MOLLE system gives you a huge level of customisation so you can weather any STOIRM!

The No. 33276 Tardigrade ROTA Hard Case is named after the toughest animal on Planet Earth... and for good reason! It is a Polyethylene constructed Hard Case for the transport or storage of sensitive electronic and medical equipment. With Fungal and Chemical Protection, you can be sure your perishables are safe, and an IP67 Water/Dustproof Rating keep the Case safe from the ingress of unwanted material. A rock-solid construction with uniform wall thickness makes the Case extremely tough, and will provide ultimate protection to whatever you need to keep safe.

A replacement or upgrade air nozzle for Airsoft electric SMG-5Ks.

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

An Alloy constructed sunshade for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

If you are one for hot-swapping your Hi-capa grips, congratulations on taking pure advantage of the modular nature of the platform! These grip screws from CowCow are designed to replace your old, worn-out grip screws so you can continue to swap and change to your heart's content!

If you are one for hot-swapping your Hi-capa grips, congratulations on taking pure advantage of the modular nature of the platform! These grip screws from CowCow are designed to replace your old, worn-out grip screws so you can continue to swap and change to your heart's content!

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

If you want to give your LCT AK a modern touch, the M4/AR-15 Buffer tube for LCT Side-Folder AK AEGs will do exactly that! Constructed with a steel folding mechanism and alloy buffer tube, this stock adapter is every bit as well made as LCT AKs and compatible with any LCT AK which uses a side folding AKS-74 style receiver. A detailed compatibility list can be found in the "Full Description" below.

The buffer tube allows practically any M4/AR-15 sliding stock to be installed and provides 5 positions of adjustment, perfect for any body type. If you're working on your PMC primary or want to give your LCT Side-folder AK a taste of modern ergonomics, this is what you need!

A moderately sized and incredibly efficient Cooler Box that is perfect for any Camping or other Outdoor Activities that require perishables to be kept fresh. The Cooler will keep your perishables fresh for up to seven days, and provides two whole days of ice retention. Not only this, but it is 'bear resistant', meaning that the scent of your ham sandwiches won't be carried on the wind to attract the local fauna. Coupled with the usual line-up of Intertek certified ratings such as IP67 Waterproof, Impact Resistance and Extreme Temperature testing, you can be sure that this Cooler Box will go the extra mile.

A highly realistic 24mm CW Suppressor/Tracer Unit made from Steel, with an internal rechargeable battery that lasts for thousands of shots. This Tracer Unit is made specifically for AKs that feature a 24mm CW Thread (please check before purchase), and can be charged using the Micro USB Cable just like your Mobile Phone.

These CYMA/EMG CM.102 SGR-12 Tri-Shot Shotguns found their way to the Boneyard due to generally poor quality control. These are brand new guns, unused and never shot but we can make no guarantees of proper functionality. As with all Boneyard items, these do not have a warranty and are sold as spare parts, wall hangers or props.

For a detailed product description and more specifications, click HERE to view the original product.

If you're looking for the ideal GBBR to base your custom build on, you just found it! The CYMA CGS 10.5" M4A1 CQB GBBR is based on the original M4A1 in CQBR configuration, with the classic ribbed handguards, L.E stock and A2 pistol grip. This means either you can run it plane Jane in the classic configuration or build your own custom GBBR without wasting high-end parts.

Not that this platform lacks high-end parts! Inside you will find the same majority steel internal parts and 6.04mm tightbore inner barrel as its Noveske and Daniel Defense cousins. The most important aspect of this GBBR is its internal system which is based on the Tokyo Marui ZET system and enhanced by CYMA's GBBR wing, known as CGS. If you like thunderous recoil, a full metal build and externals just waiting for your own custom touch, the CGS 10.5" M4A1 CQB GBBR is the one to go for!

The LCK-15 is an Airsoft Electric Gun based on the AK-15, which is a modernisation of the AK platform that went through many iterations and updates to counter issues, until the AK-12 and AK-15 were finalised.

A vital spare for Version 3 gearboxes.