All Electric Parts

If you have damaged your battery connector or you need spares for a build project, this set will sort you out! The NUPROL Mini-Tamiya Connectors Set includes 2 male and 1 female mini-Tamiya connectors with black external connectors.

The packaging states that the set includes 1 male and 2 female connectors but this is based on the external connector design. What is actually included is one connector for your gun(female) and 2 for the battery side(male), click here to see why we classify battery connectors this way.

A useful spare to have around for repairs and equally useful for scratch builds, the NUPROL Mini-Tamiya Connectors Set is a great set to have around just in case!

The Spenca CORE™ V2 Gearbox Shell provides 8mm bushings, radiused cylinder windows to help prevent cracks, and quick release spring functionality. Perfect for starting your ultimate gearbox build! 

If you are lucky enough to have an AEG with the superb Perun V2 Hybrid MOSFET installed, here is how you make it more realistic! The Perun Clicker is designed to work with the V2 Hybrid MOSFET and provides a tactile click when the trigger is pulled, along with a tactile reset. This gives the trigger a far more realistic feel, and while not close to the feel of a real trigger, is far more exciting to use than a normal AEG trigger. 

If you want to squeeze a bit more accuracy and FPS out of your AEG, Laylax has just the thing. This 6.03mm Tightbore Inner barrel is part of the Laylax Prometheus range, widely regarded as the best source for AEG upgrade parts in the world. Inner barrels from this same range are known for their rigid stainless steel construction and immaculate internal finish and are what we use in the phenomenal Bolster Armouries AEGs.

This 6.03mm tightbore is designed for AEG rifles, SMGs, and support guns which use the Tokyo Marui AEG style of barrel cut, which is the vast majority on the market, and will provide an accuracy improvement thanks to its finely polished internal surfaces and a slight increase in FPS thanks to the tighter bore improving air seal and the overall efficiency of the system.

Whether you are upgrading your SMG-5 or repairing it, the CYMA CM.041G/CM.041H Complete Gearbox E-Edition High-Speed is a great excuse to do both at the same time! This gearbox is a Version 2, designed for CYMA CM.041 series SMG-5 AEGs but should fit most SMG-5 AEGs on the market (not SMG-5K) and also includes a high-speed motor of the long shaft variety.

As the heart of the CYMA E-Edition High-Speed Platinum AEG series, this gearbox is absolutely packed with upgraded parts. Highlights of the internals include the CYMA MOSFET/ETU system, steel high-speed 13:1 ratio gears, an aluminium silent piston head and cylinder head and a quick change spring system. Being a replacement original parts set, this gearbox is the exact setup found in the superb CM.041G and CM.041H AEGs, meaning if you have ever been envious of their performance you can now make your SMG-5 shoot just as nicely!

If you are building a version 3 AR36 gearbox or you have an old AR36 AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AR36 AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AR36 doing its dirty work once again!

If you like to keep spare parts on hand, are building a gearbox from scratch or have had a tappet plate failure, CYMA's Tappet Plate for V2 Gearbox is ideal. This tappet plate is designed for version 2 gearboxes and is constructed from polymer. As with all internal parts, we recommend doing your research before attempting to install this tappet plate or consulting a tech who can advise. 

If you have had a mishap when exploring your gearbox internals and the trigger spring has gone walkies, Laylax have your back with its Lightweight Trigger Spring Set. This set provides 2 trigger springs constructed from spring steel with a lighter pull than the original trigger spring, allowing for faster semi-auto spam. The springs are compatible with AEGs which use the Version 2 gearbox, including M4/AR15s, G3 and SMG-5 AEGs.

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

If you're working on your gearbox and looking for more efficiency, the Lonex Aluminium Piston Head for V2/V3 Gearbox is ideal for your build. This piston head is constructed from CNC aluminium and is equipped with a rubber O-ring surrounding its surface to close the gap between the piston head and cylinder, ensuring every bit of air compressed by the piston is translated into downrange effect.

This piston head is compatible with version 2 and version 3 AEG gearboxes and is a handy part to have around for the techy types. Whether you're building a custom gearbox or upgrading, the Lonex Aluminium Piston Head for V2/V3 Gearbox is an essential part!

If you're looking for a sturdy upgrade to your AEG, you can't get any better than something from Bolster Armouries. This O-ring is constructed from high-density rubber and provides a superior seal to increase the reliability and lifespan of your Airsoft rifle. This O-ring can improve your air seal consistency, which can result in increased accuracy. This o-ring is compatible with most AEG piston heads.

If you are looking to further extend your advantage and push your TM NGRS system to the limits reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is specifically designed for the Tokyo Marui Next Generation Recoil Shock (NGRS) gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

A replacement Trigger for the Scorpion Evo, which is designed to be dropped into the gun and decrease the amount of travel time in the trigger, allowing for faster repeat shots. 

Generation 3 Micro Computer Programmable Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. 

If you're running an AEG with a version 3 gearbox, the Gate TITAN™ MOSFET V3; Expert Firmware is what you need to turn your primary into a space gun! This advanced MOSFET/ETU system is the latest version of the original TITAN™, designed for version 3 gearboxes found in AK, AR36, AUG and SMG-5K AEGs, boasting a drop-in fit with the vast majority of V3 shells on the market. That said, the TITAN™ still requires knowledge of AEG internals, care and patience to install; as such, we only recommend this upgrade for those with a decent level of technical knowledge and confidence working on AEGs.

The latest version of the TITAN™ V3 includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay.

For those in the process of transforming their V3 gearbox-equipped AEG into an absolute beast, the Gate TITAN™ MOSFET V3; Expert Firmware is an essential addition to your shopping list. The TITAN™ extends the lifespan of your AEG by eliminating the cut-off lever and trigger contacts, along with offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options. If you want your AEG to perform at the top of its game, the TITAN™ is a big part of achieving that!

A set of both thick and thin shims, useful for ensuring your gearbox turns over as smooth as possible.

If you have had a mishap with your bevel gear, this KRYTAC replacement part should sort it! The KRYTAC Bevel Gear Assembly for V2/3 AEG Gearbox is constructed from hardened steel and is compatible with any AEG which uses a V2 or V3 gearbox. The hardened steel construction makes this bevel gear perfect to pair with an upgraded motor to guarantee long-term performance.

Super conductive and easy to route throughout your gearbox and rest of your Airsoft AEG.

If you're working on the ultimate AK AEG build, the RetroArms Precision CNC HOP-Up Chamber for AK AEGs is an integral part! This CNC machined HOP-up unit is made from 7075 Aluminium, granting it steel-like strength and flawlessly precise machining with the weight reduction perks of aluminium. 

The most unique aspect of this HOP-up unit is the inclusion of what RetroArms call the "collet nut", a threaded nut which seals the gap between the inner barrel and HOP-up chamber walls. This saves you any messing around with PTFE tape and ensures your platform's air-seal is perfect, resulting in more consistent FPS readings translating to improved accuracy downrange. 

The set includes everything you'll need to complete the HOP-up unit with the exception of the bucking, nub and inner barrel but will require assembly. As such, we only recommend this HOP-up unit to those confident working on Airsoft internals. Best used with the RetroArms CNC Version 3 Gearbox but compatible with almost every TM-based AK AEG on the market, the RetroArms Precision CNC HOP-Up Chamber for AK AEGs is a fantastic upgrade option for performance-oriented AK build!

If you have a damaged wire, snapped motor connector or just want to improve your electric conductivity then this pack is ideal.

If you love working on gearboxes or have a version 3 custom build on the cards, the FPS Softair Complete Gearbox Spring Set for V3 Gearbox belongs in your toolbox. This set includes all of the springs needed for a version 3 gearbox build, including the tappet plate spring, ARL spring, motor height spring, cut-off lever spring, trigger return spring and switch return spring.

All of the springs in this set have been manufactured by FPS Softair to be more durable than the original springs and with more precisely calculated tension for maximum efficiency. Whether you've lost a spring, are working on a version 3 gearbox build or need spares for your technical projects, the FPS Softair Complete Gearbox Spring Set for V3 Gearbox will be useful addition to your parts bin!

FPS Softair brings us a Carbon Fibre Reinforced AEG Tappet Plate for use with version 2 gearboxes. It is specially formulated to be strong yet flexible enough to bend slightly.

The plate is constructed from extremely lightweight polycarbon and is designed to be attached to the air nozzle and sector gear. This process controls the feeding of BBs from the magazine into the hop up chamber.

A complete upgrade Cylinder set for AEGs which includes: Cylinder, Piston, Cylinder Head, Piston head and Nozzle. Improve your air seal and shot for shot efficiency today for improved range and accuracy.

An ultra compact Generation 3 MOSFET built to be as compact as possible, requiring the smallest amount space possible, and is water resistant.

If you want to add a more elite look to your M4 or you want a more snappy, responsive trigger, this should do the trick! The MAXX MODEL Advanced Speed Trigger for M4/AR-15 AEG; Type E is compatible with any M4/AR-15 AEG which uses a version 2 gearbox and is adjustable for both pretravel and overtravel, allowing you to cut out any unnecessary movement and lay down a hail of fire far more efficiently. 

The trigger is machined from a single piece of aircraft-grade aluminium using CNC processes, with a separate titanium pivot pin for maximum durability. The trigger shape is intended to provide a natural trigger position for the vast majority of hand sizes and has chamfered edges and three rubber pads to ensure comfort, enhance traction and provide positive control of the trigger. Either for use on its own or paired with an ETU/MOSFET, the Advanced Speed Trigger is ideal for CQB builds, DMR builds and others which prioritise trigger response!

If you want to breathe new life into your AEG in the form of speed and torque, the Specna Arms BLDC Brushless Motor; Long is calling your name! The BLDC motor is the affordable option in Specna Arms' new brushless motor lineup, offering the same benefits as the top-end DARK MATTER™ motors with a more economical cast aluminium housing. This variant is the 27K option, offering 27,000 revolutions per minute, plenty for a high-speed build but also an asset to any DMR build requiring a high torque solution. 

Brushless Motors boast lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. This, the "long shaft" variant is designed for M4/AR-15 derived AEGs, G3, SMG-5 and P90 AEGs and is a relatively simple install job, though you may need to reinforce other parts to cope with the impressive torque and speed delivered by the BLDC motor. 

If you're upgrading your M4, G3, SMG-5 or P90 AEG and seeking more speed for a higher rate of fire or more torque for a better trigger response and the ability to pull strong DMR springs, the BLDC Brushless Motor from Specna Arms is the ideal affordable option!

If you're done with AEGs and want to revamp your build for HPA, the GATE PULSAR D Dual Solenoid HPA Engine is a fantastic option. Designed for Version 2 AEG gearboxes, the PULSAR D is designed to work with a GATE TITAN™ II V2 ETU (HPA Version), giving you unlimited advanced programming options along with the bob on consistency, top-tier accuracy, killer rate of fire and wealth of tuning opportunities HPA builds are known to provide.

The set includes the complete engine but will require a V2 gearbox shell, V2 trigger and TITAN™ II ETU HPA Version to complete the build. When compared to the original and more affordable PULSAR S, the PULSAR D offers a higher FPS range, universal compatibility with AEG nozzles, less precision required in the assembly of the build and impressively high air efficiency, using only 0.7 PSI per shot on average at 90 PSI with a 0.8L air tank.

The PULSAR D also has the edge in accuracy and versatility over the simpler single solenoid PULSAR S, being suitable for any build objective, from CQB monster to DMR dominator. As with all internal upgrades, we only recommend this engine to those who are confident working on AEG and HPA internals, but if you're ready for the PULSAR D, you're sure to be impressed!

Increasing the rate of fire on your airsoft rifle sometimes causes it to misfeed, resulting in dry firing. A sector gear delay will solve your feeding problems 99.9% of the time with a simple add-on.

This sector gear clip increases the time it takes for the air nozzle to cycle. Delaying the cycle improves BB feeding by allowing the air nozzle to be retracted from the hop-feed for a longer duration.

This tiny add-on could instantly transform your AEG if it has been suffering from firing issues.

Although this is designed to be a perfect fit, it is recommended that this be permanently fixed in place using superglue, after testing to prevent it from potentially loosening over time.