VORSK VMP-1C GBB SMG

If you've been looking for a GBB SMG to run as a backup to your sniper rifle, this is it! The VORSK VMP-1C GBB SMG is the compact version of the VMP-1, cutting out the stock and flash hider for a more compact form that is easier to move with, especially when carrying multiple long guns. To replace the stock, VORSK has fitted a QD sling socket along with a QD sling swivel so you can add a single-point sling and keep the VMP-1C handy for those close encounters, whether it's in the cramped confines of a CQB site or out in the woods.

Starting at the front, we can find a VORSK thread protector concealing 14mm CCW male threads beneath. While the VMP-1C is not compatible with the VMP-1X suppressor, you can fit your own 14mm CCW suppressor or tracer unit straight away for a sneaky look or a CQB instinct-aiming advantage!

Next up we reach the high density polymer receiver which is adorned with weight-reducing grooves matching VORSK’s unique external style, making this the perfect bigger brother to VORSK’s Hi-capa which has similar cuts in its slide. The 12 o’clock position boasts a full length 20mm Picatinny rail with a relief channel in the centre to allow the built-in light-enhancing iron sights to be aligned.

Due to the compact nature of these sights, you can mount whatever optical sight you require to the rail and still have the sights available for emergency use. Like the legendary MP7, there is a whole lot of rail space on this bite-sized platform so if you want to dress it up like you are hunting Bin Laden, a PEQ box, red dot sight and magnifier combination is not out of the question!

Either side of the VMP-1C features a 20mm Picatinny rail which can be positioned on either the upper or lower rail attachment points or removed entirely, allowing you to customise the VMP-1C for your needs and playstyle. In the default configuration, the rails are mounted in the lower slots, but if you prefer to take a higher grip or use the “thumb over bore” technique you can raise the rails up to give your hands a bit more space for a solid grip on the platform.

The 6 o’clock position is also equipped with a 20mm Picatinny rail and is perfectly placed to allow a vertical or angled foregrip to be mounted for greater comfort and improved weapons handling. This rail, like the 12 o’clock rail, is moulded as a part of the high density polymer body, meaning no chance of failure and maximum strength.

The controls of the VMP-1C mimic the legacy Steyr TMP and B&T MP9 in their layout, with a push-through fire selector switch located on the pistol grip which can be used by both left and right-handed shooters. The fire selector offers 2 modes; semi-auto and of course, fully automatic, aka the fun mode. The safety function is provided by the VMP-1C's two-stage trigger which functions similarly to an EU series handgun; requiring the central blade be pressed first for the SMG to fire.

Just below the fire selector, we can find the magazine release which is a push button and conventionally placed, just like a pistol. If you have had some time behind the sights of practically any modern handgun design on the market you will feel right at home with the VMP-1 in your hands. On the left side of the receiver, we can find the bolt release catch, similar in position to a pistol and well within reach of the thumb when the VMP-1C is held in a firing grip.

The pistol grip has a slight rearward cant to it, similarly to the MP9 platform, and is covered on all sides with VORSK’s unique stippling style texture found on the grips of several members of their GBB pistol line. At the base of the grip, we can see a semi-circular cutout, present on either side. This was done to allow a dirty or tight magazine to be removed easily under duress and is derived from cutouts found on high-end customised Glock pistols and other modern platforms.

The charging handle is located at the top rear of the receiver, operating similarly to the MP7, MP9 and the M4/AR-15 platform. Like the aforementioned platforms, the VMP-1X charging handle does not reciprocate with each shot and instead stays firmly in place and out of the way while keeping the system well-sealed when not in use.

The charging handle is very low profile, allowing the VMP-1C to be carried easily on a sling without needing to worry about snags inhibiting your movement, and can be operated from either side by hooking the index and middle finger over the handle and pulling it back. As with all GBB platforms, the VMP-1C requires cocking to chamber the first BB before firing and when the magazine runs dry the bolt will be held open by the bolt catch, which is your cue to reload!

At the rear of the VMP-1C, we have a single-point sling mount, leaning into the compact nature of the SMG by deleting the stock entirely. This makes the C variant easier to carry as a secondary, making it ideal as a backup platform for snipers. Losing the stock also makes the light-enhancing iron sights far easier to use and also allows for more intuitive use with a full face mask which would usually get in the way.

Whether you usually run a pistol in CQB and you want something with more firepower or you are a sniper searching for a GBB backup with full auto, the VMP-1C brings the pain in a more compact form than ever before!

Features

• High density polymer construction
• 6.03mm Tightbore inner barrel - Great accuracy potential
• 14mm CCW Male threaded outer barrel - Tracer/suppressor ready!
• System 7 adjustable HOP-up unit - Accessible through the ejection port, Adjustment tool included
• GBB SMG - Super speedy rate of fire, almost A-10 Warthog!
• 20mm Picatinny railed receiver - Ready for a red dot sight or scope
• 20mm Picatinny rail at the 6 o'clock position - Mount your grip here!
• Removable/repositionable 20mm side rails - Reposition to lower or upper, or remove entirely
• MP9 style controls - Very ergonomic, majority ambidextrous
• QD Sling socket at the rear - QD Sling swivel pre-installed, ready for a single point sling
• VORSK's unique stipple texture on the pistol grip - Great for extra grip in wet conditions
• Compatible with VORSK VMP-1 Magazines and ASG/KWA/KSC MP9/TP9 magazines

Package Includes

• VORSK VMP-1C GBB SMG
• 45rnd Green Gas Magazine
• Quick start guide
• Spare Nozzle
• PVC Patch
• HOP-up adjustment tool