PARRA No. 946 Mantis Hard Case

PARRA
Code: PRA-095
299.00 kr.
Was 449.00 kr.
Save 150.00 kr.
  • Waterproof IP67
  • Impact Resistant
  • Pick n' Pluck Foam

With a virtually indestructible Polypropylene construction, multiple layers of internal Pick and Pluck Foam as well as an IP67 Water and Dustproof rating as certified by Intertek (third party quality assurance company), this case is ready to take on anything. It also sports Impact and Extreme Temperature resistance as well as a Folding Grab Handle and Pressure Equaliser Valve.

Full description

Description

PARRA are manufacturers of multi-function storage cases that are designed to go the extra mile and survive even the harshest conditions. Whether it's underwater submersion, damage from impacts and shock, extreme temperatures in the -40°C to 90°C range or damage from changes in Pressure, the Mantis Hard Case has an answer for everything. This is an intermediately sized Hard Case that makes it convenient to carry around with you using the Folding Grab Handle, but can easily be stored in the boot of your car, under beds and in cupboards. The stackable design of the Case allows you to easily stack multiple cases together to make the most of the space available. The Mongoose Case is constructed from an extremely tough Polypropylene (PP) + Glass Fibre material, with reinforcement in key areas to make it extra strong, and with a design that allows them to easy fit together. A set of Rubber feet will reduce damage caused by Cases rubbing together. The handle of the case can be folded away to make it even more compact in storage, and the hinges are supported by Stainless Steel pins to ensure long-life performance.

The case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with two thick pick and pluck layers, allowing you to customise the shape of the foam to achieve the perfect fit around your precious valuables. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as for a collection of electronics, or a Drone with delicate blades for example.

The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°C and 90°C allowing the case to remain strong no matter the weather conditions.

The case features heavy duty clasps designed to keep the case secure, with two strong dual movement clasps which make the case easy to open, but give an extremely strong lock for transport. If you're worried about tampering the case also features two pad-lock holes, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone trying to get a sneaky look inside.

The case also features an adjustable air valve which is designed to release pressure for transport by air, or in situations with high pressure such as at height. The valve is fully adjustable, but also water resistant, allowing you to adjust the amount of pressure allowed to equalise inside the case but without flooding the contents.

If you need a seriously strong and tough Hard Case for your delicate equipment, whether you're a regular airline user, extreme explorer/adventurer, or you just need to be able to move valuable equipment from A to B whilst knowing that it is fully protected (and rated) against the elements, then the No. 946 Mantis Hard Case is the way to go.

Features

  • Ideal for Electronic Equipment
  • Foam prevents contents moving
  • Great for compact, long term storage
  • Eggshell foam lid insert
  • Two Pick and Pluck storage inserts
  • Base separator foam piece protection
  • Easily slides under beds, or fits in cupboards
  • IP Rated up to IP 67
  • Dust Tight Case to protect the contents
  • Protected against water submersion up to 1m for 30 mins
  • Rubber seal for an extra tight seal when closed
  • Secured using two dual movement clasps
  • Folding low profile carry handle
  • Padlock holes for using a TSA lock or during storage
  • Reinforced where needed
  • Impact Resistant
  • Protects in low temperatures down to -40°c
  • Protects in high temperatures up to 90°c
  • Stainless steel hinge pins
  • Manual pressure air valve which resists water
  • Heavy Duty Polypropylene (PP) + Glass Fibre construction
  • Transport equipment with peace of mind

Package Includes

  • PARRA No. 946 Mantis Hard Case
  • Egg-shell foam lid insert
  • Foam Separator base insert
  • Two Pick-Pluck foam storage inserts

Specification

General

Colour Wheel Greyscale
Item Colour
Black
Material Icon
Material
  • Polypropylene
  • Fiberglass
Product Length
Approx. 34cm
Product Width
Approx. 31cm
Product Height
Approx. 15.2cm

Case Related

General

Case Size
Medium
Recommended For
  • Pistol
  • Helmet
  • Tools
  • Camera
  • Drones & Equipment
  • Laptop
  • SD Cards
  • Sights
  • Hard Drive
  • Attatchments
  • Camera Lenses
  • Tablets

Case Features

Ratings
IP Rating
IP67
Certificate Issuer
Intertek
Certificates
Impact Resistance Test - ATA300 Revision 8.0 B-2-5
Waterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7
Immersion MIL-STD-810 F Notice 3 Method 512.4
Low Temperature IEC60068-2-1 Sixth Edition
High Temperature IEC60068-2-2 Fifth Edition
Protection
Waterproofing
Icon - Waterproof
Waterproof
Dust Proof
Yes
Crush Proof
No
Shockproof
Yes
Air Valve
Yes
Rubber Seal
Yes
Minimum Temperature
-40°c
Maximum Temperature
90°c
Padding
Padded
Yes
Padding Material
Soft Foam
Padding Type
  • Pick and Pluck Foam
  • Egg Shell Foam Lid Insert
  • Thin Base Separator Padding
Latches
Latch Types
Dual Movement Clasp
Latch Count
2
Handles
Grab Handle
Yes
Handle Type
Folding Carry Handle
Security
Security Features
Padlock Holes

Dimensions & Weight

Weight
Weight KG Icon
Weight (KG)
Approx. 2.26kg
External
External Length
Approx.34cm
External Width
Approx.31cm
External Height
Approx.15.2cm
Internal
Internal Corner Radius
Approx.10mm
Base
Base Internal Depth
Approx.12.4cm
Base Internal Lower Length
Approx.31.4cm
Base Internal Lower Width
Approx.24.3cm
Base Upper Length
Approx.31.4cm
Base Upper Width
Approx.24.3cm
Lid
Lid Internal Depth
Approx.3cm
Lid Lower Length
Approx.31.4cm
Lid Lower Width
Approx.24.3cm
Lid Upper Length
Approx.31.4cm
Lid Upper Width
Approx.24.3cm