Laylax

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

For the smoothest and strongest bolt pull for your Tokyo Marui, CYMA or JG VSR-10 Pro and G-Spec sniper rifles. 

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your AEG running for longer at high speed thanks to its reinforced polymer construction. 

Instantly boost the ergonomics of your ARP9 with this simple, yet effective magazine catch. The widened magazine catch retains the ambidextrous nature of the original catch while making it easier to manipulate as well as operable with your index finger. Allows for drop free reloads just using your trigger finger from your firing grip.

The VSR/Bar-10 is still an absurdly popular rifle today, only one problem - No bottom RIS rail! Fear not Laylax have just the thing, a 20mm RIS rail that fits over your front Harris lug. Measuring roughly 9.5cm and just under 4 inches, the rail allows you to attach some much needed tactical equipment to your VSR, such as a bipod for additional sniping stability.

Constructed from tough, but lightweight aluminium, the rail is screws in place to the underside of the fore stock. It also comes with a magazine catch so you can still reload as you normally would. Treat yourself and your VSR to some additional tactical upgrades with a rail mount!

If you are upgrading your VSR platform sniper rifle to the max an enlarged bolt handle can help when it comes to pulling back a mighty upgraded spring! With this in mind, Laylax conceived the PSS NEO Bolt Handle, designed for use with the Tokyo Marui VSR-10. This bolt handle should also fit VSR-10 clone sniper rifles but as with any upgrade parts, modification may be necessary.

The bolt handle and base are constructed from aluminium and the bolt handle has machined grooves to make it easier to grip in wet weather. The bolt handle is also at a turned-down angle to ensure it clears your scope, no matter how big it is. Marked on the handle and base are helpful instructions on how to use your rifle, in case you hadn't already figured that out! The laser engravings read "1 LIFT THE BOLT HANDLE" "2 PULL >>>>>>" and "3 FIRE". Thanks for the help, Laylax!

If you have dreams of kitting out your NGRS AK with the slickest modern stock attachment interface out there your dreams can now become reality! The 1913/20mm Picatinny Stock Adapter from Laylax is designed for the TM NGRS AK, specifically the side folding stock variants (AKS-74U, AKS-74N and AK-102) and replaces the original skeleton side folder with a short length of 1913/20mm Picatinny rail to allow 1913/20mm Picatinny stocks to be mounted and swapped out for alternatives in seconds. 

The adapter is constructed from aluminium and also has a QD sling socket on the left side, in the ideal position to run a single-point QD sling setup. If you want a more modern look for your AK this adapter gives you access to MPX and MCX stocks in a plethora of shapes and sizes and also the good old M4/AR-15 buffer tube if you are after something a bit more conventional. 

If you want to shorten your MCX down a bit or you are going for a slick integrally suppressed look for your next build this outer barrel from Laylax is just what you need. This barrel is 6.5 inches (17cm) in overall length and is constructed from aluminium for a perfect balance between low weight and strength.

At the tip of the barrel, we are treated to 14mm CCW male threading, allowing you to equip your MCX with a suppressor for sneaky duties. The tip of the barrel is wide enough to allow an inner barrel to pass straight through, meaning no need to mod it if you want to keep the original MCX inner barrel length. If installed on a standard MCX the barrel will be entirely beneath the handguard, allowing you to mount a tracer unit or suppressor without increasing the overall length of your setup and give your rifle the "Honey Badger" look. If you are adding a tracer make sure you get a shorter inner barrel as well!

For those of you looking to customise your VSR, this should be on your list. Laylax bring us a new addition in their 'Precision Sniper System' range. Featuring machined steel construction this reliable trigger benefits from a low profile as a sniper you are likely tend to crawl and stay in the prone position with your cheek to the rifle for extended periods and a reduced safety profile is less likely to get caught accidentally.

With a sleek black design to complement your VSR or G-Spec, it also features a ridged texture on the catch for an increase of grip.

Here we have a stronger, or even replacement lock hook for the KRISS Vector's folding stock. if you want to get ahead of any potential stock lock failure in the future or you're simply the type of rough and ready player that plays hard with your RIF, this would be a worthwhile upgrade for you.

Constructed from duralumin, a strong, lightweight aluminium alloy, which can endure even the most rigorous shooting and movement for performance and peace of mind.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Can be fitted inside other rifles including AEG gearboxes. The sorbo pad works by absorbing impact from your piston head, please note you should expect an FPS loss so you may have to improve the air seal or fit a slightly larger spring to regain your desired FPS.

If you are upgrading your MPX AEG, a ball bearing spring guide is a great way to reduce stress on the gearbox and spring, and prolong the life of your internals when operating in high-strain setups. The Laylax Ball Bearing Spring Guide is designed for the MPX and is a quick and easy replacement thanks to its quick change functionality.

The spring guide is constructed from steel, which alone will prolong its life considerably, but the ball bearings in its base allow the guide to spin freely and redirect any stress on the gearbox shell, and the spring itself.

Constructed from aluminium, this speed style flat surface trigger is great for quicker trigger manipulation and providing your rifle with the SPEEDQB aesthetic. It also features a ridged front texture for additional handling and grip. Lightweight, with a sweet metallic shine, this trigger is designed for Ares AMOEBA series.

If you are after a bit more accuracy from your GBB pistol, a tightbore barrel is the easiest and most effective solution! Introducing the 6.03mm Tightbore Inner Barrel from Nine Ball, one of the best inner barrels you can treat yourself to. The Inner Barrel features standard inner barrel cuts, meaning the barrel is compatible with TM-based GBB pistols with the VSR style bucking (WE, Umarex G series etc.). Due to its length, we recommend this for GBB pistols, specifically HI-CAPA 5.1 and 4.3.

The inner barrel is constructed from stainless steel, with a highly polished internal surface for minimal friction and a deep and smooth crown to ensure your BB leaves the barrel smoothly and consistently. This barrel is cut for either VSR/GBB style HOP buckings.

If you want your SigAir MPX even shorter than it comes from the factory this kit will do it! The Laylax Outer Barrel Base & Battery Block Set for SigAir MPX includes a super short outer barrel base and the Laylax Battery Block, allowing you to install a barrel extension or a suppressor which runs beneath the handguard for the integrally suppressed look. 

This part replaces your original outer barrel with an aluminium barrel base measuring 8.5cm overall length, with 4.5cm protruding ahead of the receiver when installed. Also included is the Laylax battery block, designed to keep your battery contained within the handguard when your barrel is pointed down. The battery block won't fit over a suppressor but if you decide to fit a barrel extension it should fit any with a diameter of less than 19mm. 

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.