Airsoft Handguards

A CNC Aluminium Upper Handguard for select LCT LCK (AK) Airsoft Replicas. It offers stunning precision manufacture and a top 20mm Rail for accessories, and is the perfect companion to any Custom Build / Modified AK.

If you want to add a modern touch to your AK, the CYMA Aluminium KeyMod Handguard for AK-47/74 is what you need! This CNC Aluminium handguard is equipped with KeyMod negative space attachment slots at 3, 6, & 9 o'clock with a 20mm Picatinny rail running along the top, ready for a PMC-style forward-mounted red dot sight. 

On each side, we are treated to a pre-installed 20mm Picatinny rail adapter for KeyMod, giving you the option of using more common 20mm Picatinny accessories or removing the adapters to mount more modern KeyMod solutions. The handguard itself is constructed in two parts, allowing you to use both or simply the upper or lower handguard, depending on your build requirements. If you're going for the modern tactical AK look, the CYMA Aluminium KeyMod Handguard for AK-47/74 is perfect for your build!

If your MCX is a bit of a pig and you want more agility, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG will do the trick. This handguard is constructed from authentic Carbon Fibre and as such, it tips the scales at only 123g! Though this handguard will help your MCX lose weight, it does so without compromising on attachment interfaces, offering M-LOK slots at 3, 6, 9 and 12 o'clock and additional slots at the lower offset angles.

Another advantage of the Carbon Fibre handguard is its width of approximately 48mm, allowing you to run an integrally suppressed setup and still make use of your M-LOK slots provided your suppressor is slim enough. The set also includes a short section of aluminium 20mm Picatinny rail for M-LOK pre-installed on the rearmost upper M-LOK slot, designed to seamlessly interface with your receiver rail. If you're seeking a speedy look for your MCX without compromising accessory options, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG is what you need!

If you are gearing up to spruce up your old AK AEG this might be handy! The Front Handguard Cap with Sling Point from CYMA is an original replacement part for the CM.04x series AKM/AK74 AEG. The part is constructed from alloy and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the CM.04x series but should also work with VFC and LCT AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full size AK handguards only.

A Real Wood handguard for the LCT LCK74 which is made to the original spec and includes a Steel Gas Tube. This is an ideal replacement for a damaged handguard, or to convert another LCT AK74 model.

If you're building out your AK to match the latest real steel builds, the 5KU Lightweight Zco Style Lower Handguard for AK-47/74 is an essential bit of kit. Based on the real steel Zco B30 handguard, this CNC 6061 aluminium lower handguard is designed to fit CYMA, GHK and LCT AK rifles and provides a full length 20mm Picatinny rail at 6 o'clock and a short length at 3 o'clock. 

Additional accessories can be mounted using Zco style rail adapters, and despite being double the length of standard AK handguards, the Lightweight Zco Style Lower Handguard tips the scales at a minuscule 174g, meaning it won't slow you down in-game. If your AK is due for a makeover, give it the modern touch it deserves with the Lightweight Zco Style Lower Handguard for AK-47/74 from 5KU!

If you want to optimise your MCX for CQB, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will get you there. This set includes a 7-inch outer barrel and a detailed replica of the real steel Spear LT SBR handguard, both CNC machined from aluminium with the precision we expect from Airsoft Artisan. 

The Spear LT SBR handguard features M-LOK slots at the 3, 6 and 9 o'clock positions with additional slots at the lower offset angles and a single extra slot on each side, just ahead of the gas block cutout. This matches the handguard of the latest MCX SBR variant, keeping your MCX at the cutting edge of modern platforms. If your MCX needs to lose a few inches and gain a few M-LOK slots, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will sort it out!

Introducing OMG, the ultimate base set for building your very own Speedsoft M4 airsoft replica. This custom-designed receiver and matching handguard set are CNC-cut to perfection and coated with a durable Cerakote finish that comes in a base colour with a contrasting splatter design, making it a true standout on the field.

Crafted with precision and the highest quality materials, OMG is designed to provide an extra level of grip and protection to your airsoft gun. Its unique and eye-catching design is sure to impress even the most seasoned players.

The OMG receiver and handguard set are put together quickly and are of course compatible with most M4 parts, providing maximum versatility and adaptability. This product is perfect for both beginners and advanced airsoft enthusiasts who want to elevate their gameplay to the next level.

OMG is not just an upgrade in aesthetics, but in functionality as well. The Cerakote finish provides an extra layer of protection against wear and tear, while the CNC-milled cuts ensure maximum precision and stability during gameplay.

Don't settle for an ordinary airsoft build when you can have a standout one with the OMG body and handguard kit. Get yours today and dominate the field like never before.

If your AK is equipped with an ALFA-style lower handguard, this is the upper handguard you need to complete the build! The 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards is CNC machined from aluminium and provides a 20mm Picatinny rail up top, ready for a laser, flashlight or any other 20mm rail-mounted accessory. 

This upper handguard is designed specifically to be paired with the 5KU ALFA lower handguard, mounting via the threaded holes along each side. The set also includes the screws you'll need to bolt your new upper handguard to your ALFA lower handguard. If your ALFA style lower handguard is looking a bit lonely, add the 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards to complete the look!

A drop-in fit OEM manufactured replacement handguard, compatible with the Amoeba range of M4s, from AM002 through to AM006.

If you are gearing up to spruce up your old AK AEG, or replace your damaged handguard cap, this might be handy! The LCT Front Hand Guard Cap For AK Variants is an original replacement part for the LCT LCK variants. The part is constructed from steel and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the LCT products but should also work with VFC and other AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full-size AK handguards only.

It features a sling point on the side, making this cap an ideal way to sling your AK platform whilst out on the battlefield. If you're looking for a replacement cap for your Russian rifle, the LCT Front Hand Guard Cap For AK Variants is just what you need!

A replacement upper handguard for LCT branded LCK models which have Polymer furniture, which comes included with a Steel Gas Tube. This kit could also be used to convert a Wood furniture LCK to Polymer furniture.

An original replacement for the handguard of an LCT branded LCKM, which is made with Real Wood and Steel, and comes included with the Gas Tube. The part is easy to install, and is made to the same specification as the original part. This is the ideal purchase to replace your LCT LCKM handguard or convert another AKM series model.

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

The Strike handguard also comes with an angled foregrip pre-installed on the 6 o'clock M-LOK slots which can be removed and repositioned wherever you prefer. Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip will do the trick!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

If you're working on a low-cost, low-weight build, the Delta Armory Polymer 20mm Picatinny RAS for M4/AR-15 Delta Rings is a fine choice. Priced at less than a Big Mac meal but packaged with a pair of rail covers, this handguard is constructed from high density polymer, tipping the scales at a mere 180g!

Like the real KAC RAS it is based on, the Delta Armory RAS boasts 20mm Picatinny rails at 3, 6, 9 and 12 o'clock and is a two-part design with a separate upper and lower handguard. This means that once installed you can remove the lower handguard without tools, either for a battery change or to mount an M203 launcher. The included rail covers are designed to protect your hands and keep your rails crisp and in-spec but can be removed by holding the metal tab at the end down and sliding them off. 

Compatibility-wise, this handguard is designed to be paired with a Delta Ring and Handguard Cap so can easily be installed on M4A1, CQBR, XM177 and other classic M4/AR-15 configurations with the same procedure as the original ribbed handguards.

If you're working on a classic M4A1 build or you broke your handguards and need cheap replacements, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are ideal. These handguards are constructed from high density polymer with the classic M4A1 ribbed design and a slightly wider profile than XM177 handguards. 

These are two-piece handguards designed to mount to M4/AR-15 delta rings found on M4A1, XM177, CQBR and other classic M4 configurations. If you aren't sure if these handguards are right for your AR, contact us for clarification. Ideal for lightweight builds or the retro aesthetic, the Delta Armory Ribbed M4A1 Handguards for M4/AR-15 are affordable and functional!

If you like to keep pace with the latest British Army-issued firearms, you must be planning a KS-1/L403A1 build! The Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is the handguard you need to complete it. Constructed from superb quality CNC aluminium with flawlessly crisp matching, this rail is phenomenal quality, as we might expect from Airsoft Artisan. 

The L403A1 handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories perfectly. Also included in the box is a set of outer barrel shims to completely eliminate wobble, allowing the L403A1 handguard to be paired with a wide variety of barrels on PTW, GBBR and AEG M4/AR-15 platforms. If you're working on a KS-1 build and want it to be stitch-perfect, the Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is a must!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

Introducing Neo.2, the ultimate base set for building your very own M4 airsoft replica. This custom-designed receiver and matching handguard set are CNC-cut to perfection and coated with a durable Cerakote finish that comes in a base colour with a contrasting splatter design, making it a true standout on the field.

Crafted with precision and the highest quality materials, Neo.2 is designed to provide an extra level of grip and protection to your airsoft gun. Its unique and eye-catching design is sure to impress even the most seasoned players.

The Neo.2 receiver and handguard set is put together quickly and is of course compatible with most M4 parts, providing maximum versatility and adaptability. This product is perfect for both beginners and advanced airsoft enthusiasts who want to elevate their gameplay to the next level.

Neo.2 is not just an upgrade in aesthetics, but in functionality as well. The Cerakote finish provides an extra layer of protection against wear and tear, while the CNC-milled cuts ensure maximum precision and stability during gameplay.

Don't settle for an ordinary airsoft build when you can have a standout one with Neo.2. Get yours today and dominate the field like never before.