- Full metal construction
- Ultra-short version - Great for CQB
- Mounts to 20mm Picatinny rails
If you need more firepower without extra length, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty is ideal. Based on the real steel M203 grenade launcher used by Arnie in Predator and serving with the US Army from the late Vietnam War right up until the present day, this M203 is the "Super Shorty" version, even shorter than the "Short" version and ideal for compact SMGs and short-barrelled rifles. The pre-installed mount is a QD example for 20mm Picatinny rails, meaning you can quickly mount it and remove it in seconds depending on the situation at hand.
Like other Airsoft M203s, the A&K Super Shorty uses 40mm MOSCART grenades as a power source and will require at least 1 grenade to function. Most MOSCARTs work like a giant shotgun, sending between 18 and 140 BBs downrange with a single pull of the trigger with a game-dominating spread, though specialised MOSCARTs which shoot different payloads are available. If you want to give your primary a more aggressive look with a firepower increase as a bonus, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty will give you what you need!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
If you're a noob tube fan but primarily play CQB, this is the launcher for you! The A&K M203 40mm MOSCART Grenade Launcher; Super Shorty boasts full metal construction and a convenient QD mount for 20mm Picatinny rails. Being the "Super Shorty" model, this is the shortest '203 on the market, ideal for compact SMG and short-barrelled rifle setups.
To attach the M203 Super Shorty to your primary you will require at least five inches (12.5cm) of free 20mm Picatinny rail space on your platform to provide clearance for the trigger. A perk for the indecisive grenadier, this launcher comes equipped with a QD mount for 20mm Picatinny rails, meaning you can ditch your launcher on a wim to reduce weight or keep it in the kit bag and install it in seconds when you need more firepower!
The QD mount is simple and quick to use; simply press down on the small tabs in the middle of the lever then flip the levers rearwards. Now that they are loosened, the M203 Super Shorty can be installed in your desired position. Once it's in place, flip the levers forward to secure it.
This grenade launcher is fed using a single 40mm MOSCART shell. Once the MOSCART is loaded with BBs and gas it is then ready to be loaded into the M203. To load this launcher, you must push down on the tab on the top left of the launcher, after this you can slide the handguard forward. Then insert your MOSCART at the back of the barrel and slowly slide the handguard back into place, being forceful here can trigger the MOSCART, so be careful! This is then primed and ready to fire, all the necessary safety precautions should be taken.
Part of the original M203 included in this Super Shorty version is its trigger lock safety system, designed to minimise negligent discharges as long as you use it, that is! To engage the safety, pull back on the tab located just in front of the trigger. This then locks the trigger's movement and obstructs its travel. To release the safety and ready this grenade launcher for firing, push the tab forward and the '203 is hot.
Once your MOSCART shell is loaded, this launcher should be treated as a primed Airsoft gun. We recommend only inserting your shell in the game zone, lest you upset your local site's marshalls. If you're unsure about MOSCARTs, we recommend giving our MOSCART guide a quick skim through for loading and safety tips!
If you're looking for a more menacing look for your short-barrelled primary or want extra firepower without extra length, the A&K M203 40mm MOSCART Grenade Launcher; Super Shorty belongs on your gat!
Features
- Full metal construction
- 40mm MOSCART Grenade launcher - MOSCART Shell required
- Ribbed handguard - Comfortable with the iconic M203 aesthetic
- Trigger block safety - Inside the trigger guard, blocks and locks the trigger
- Barrel release latch on the left side - Well within reach of the shooter's thumb
- Slide the barrel forward to load - Press the latch, slide forward and insert your MOSCART
- Ultra-short version - Great for CQB and short-barrelled platforms
- Mounts to 20mm Picatinny rails - Quick detach mount
- Trigger guard provided separately in the box - Optional install (we recommend it though!)
- Need intel on MOSCART Grenade Shells? Check out our MOSCART Guide or Video
Package Includes
- A&K M203 40mm MOSCART Grenade Launcher; Super Shorty
Specification
General
|
Launcher
|
---|---|
|
Yes
|
|
Yes,
No,
|
|
Yes
|
|
Yes
|
|
Launcher
|
|
Experienced Player
|
|
Lubrication is required
|
Weight and Dimension
|
Approx. 0.897kg
|
---|---|
|
25.5cm
|
|
25.5cm
|
Construction
|
Black
|
---|---|
|
Alloy frame, outer barrel, trigger, safety & barrel release lever. Aluminium mount & QD throw levers. Steel mount bolts & QD lever locks. Polymer handguard
|
|
Polymer
Alloy
Aluminium
Steel
|
|
Alloy
Steel
|
Weapon Specific
|
MOSCART / Airsoft Grenade Shell
|
---|---|
|
None
|
|
Launchers, M203 Grenade Launcher,
|
|
Safe
Single Action
|
|
Trigger Lock
|
|
Right Handed
|
|
Break Action
|
|
1:1
|
Hop-Up
|
No
|
---|
Furniture
|
Ribbed handguards
|
---|---|
|
20mm RIS / RAS
|
|
None
|
Barrel
Outer Barrel Length (in)
|
7''
|
---|
Product Testing Data
|
MOSCART dependant
|
---|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |