CYMA Airsoft

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.

If you're running the super cool CYMA CM.136 Grach EBB as your sidearm, this is the place to stow it! The CYMA Retention Holster for CM.136 Grach EBB Pistols is specifically designed for the CYMA CM.136, meaning no worries with compatibility and a flawless fit. This is a retention level 2 holster, meaning it requires the external button to be pressed to draw the pistol which results in greater security than level 1 holsters, ideal for aggressive skirmishers who get stuck right in!

The holster comes pre-fitted with a "paddle" mount attached via the common 30mm toothed rotary interface. The paddle mount fits practically any belt, from wide tactical belts to regular civilian belts and the rotary interface allows you to adjust the draw angle to suit your playstyle and work around anything else you may have on your belt kit. 

A massive advantage of the rotary interface is the wide variety of different wear options it provides, from MOLLE mounts to shoulder harnesses and drop leg panels. No matter how you plan to run your CM.136 Grach EBB, the CYMA Retention Holster is good to go!

An Alloy constructed Muzzle Brake for AK model replicas, which comes supplied with an adaptor to install it on any 14mm CCW thread.

Looking to make your SMG-5 AEG even more compact? Perhaps you had an accident with your previous stock and need a replacement? Here it is, and at a price that makes sense even for a more affordable SMG-5.

Constructed from alloy, this is an Airsoft AEG replica of the OTs-03 SVU ‘Dragunov’ bullpup sniper rifle, the successor to the legendary 'Dragunov' SVD, first seen used by the Russian Federation in the First Chechen War.

A Tactical Suppressor for Airsoft AEG Rifles or Pistols rocking a 14mm CCW thread. This classic suppressor style will fit right on almost any Airsoft Assault Rifle!

If you want glowing BBs without making your primary any longer, the CYMA Tracer HOP-Up Chamber for M4/AR-15 AEGs is a great shout! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub. 

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself. 

While it is designed for use with the CM.097 series and other CYMA Platinum M4/AR-15 AEGs, this unit should work with most M4/AR-15 AEGs on the market, potentially requiring modifications to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your CQB primary with the CYMA Tracer HOP-Up Chamber for M4/AR-15 AEGs?

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear. 

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

Think AK, but bigger! The RPK is everything you love about the iconic AK, except it has been supersized. The CYMA CM.052 RPK-74 AEG is a faithful replica of the Russian support rifle. This AEG looks brilliant and shoots just as wonderfully, this is something that can be observed in all of CYMA's full metal AK platforms.

The CM.052 sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and authentic real wood furniture matching the iconic rifle that was issued to Russian armed forces. The RPK-74 takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45-round style high cap magazine which holds a stupendous 750 BBs!

If you are a real Dragunov fan, nothing beats steel and real wood! The CYMA CM.057 is widely known to be the best replica of the iconic Dragunov SVD DMR rifle and this version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first issued. The CM.057 boasts full metal construction with a large proportion of steel in its build, giving it a reasonable and realistic weight without making this Dragonov a drag (hehe) to carry around all day!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD a great base platform for a DMR build. If you are after a long-range platform and want something with hints of modernity combined with the retro looks of real wood, the CM.057 should be at the top of your list!

If you want to take your Airsoft AK AEG to the next level and give yourself some AR-style advantages, the Enhanced Safety Lever from CYMA will speed up your weapons manipulation and make up for the AK's "retro" ergonomics. This safety lever is constructed from steel and is compatible with most Airsoft AK AEG rifles on the market, and lets you switch fire modes using the trigger finger, without removing your hand from the pistol grip.

If you want to hot swap upper receivers like a real operator, now you can if you have a CYMA CM.097 AEG! The CM.097 Upper receiver is a replacement original part, and could be of use to someone wanting to freshen up an old AEG, or could be used to build a specialised replacement upper receiver so you can change your CM.097 length and battlefield role quickly and easily. The upper receiver comes with a pre-installed dust cover, charging handle, mock forward assist and mock bolt carrier, so no need to source these trim parts separately! This upper is a modern design with the squared off geometry and advanced look, making it a sure choice for a 21st century high speed M4/AR15 build.

A pre-assembled, ready to use complete gearbox set designed for use in 6mm Airsoft BB replica M14 AEGs. With all the components assembled and in place, this gearbox is ready to be dropped into place in your M14 AEG, replacing any old and worn out gearboxes.

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate pencil barrel and 2 position XM177 style stock, the CM.009D M653 is the old school tacticool carbine from a time before the M4!

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

An Aluminium constructed charging handle extension for AK style replicas.

A Tactical Assault Rifle Suppressor for Airsoft Rifles, rocking a 14mm CCW thread this classic suppressor style will fit right on almost any Airsoft Assault Rifle or SMG!

Looking to give your M24 platform Sniper rifle a bit more range? The CYMA Upgrade set for CM.702/M24 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

This set is compatible with most M24 sniper rifles based on the Classic Army design but is designed for the CM.702 series, and may need modification and tuning for other M24 platforms.

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate XM177E1 sound and flash moderator and 2 position XM177 style stock, the CM.009D XM177E1 is the old school tacticool carbine from a time before the M4!

If you've lost your mock cleaning rod, your AK will be looking odd! Here's what you need to fix that. The CYMA Mock Cleaning Rod for AK-47/74 AEG is designed for the CYMA CM.04x AK AEG series but should also fit other AKs from other brands which use the LCT or VFC build style. The rod is constructed from steel, and it goes without saying, you should never attempt to use this rod to clean the barrel of your Airsoft gun, it is only for the look!

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

If you have lost or damaged your original AK AEG bolt carrier it will probably still work, but man, is it ugly! CYMA's Charging Handle/Mock Bolt for AK AEG is a drop-in replacement part which solves this aesthetic issue, providing a black-finished alloy mock bolt carrier mimicking the finish applied to the real AK-74 series bolt carriers. This part will fit almost all CYMA AK AEGs and should also fit others with TM AEG compatibility. 

A 6mm BB Airsoft Electric non-blowback Pistol, based on the iconic original 1911 pistol perfect for if you are wanting to get into Airsoft skirmishing. The CM.123 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to get a quick draw on an opponent. 

Designed to be easy to use, right out of the box, this electric Airsoft 6mm BB gun let's you get into battle right away.

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well. 

If you are looking for a lil CQB monster AEG but shorty AR15's don't float your boat, the CM.041PDW is worth a look! Constructed from strong alloy in all the places the real one is, with a high torque motor and impressive performance right from the box, you can dominate the CQB field in a classier manner than ARP people with this classic PDW from Cyma. 

If you are the sneaky type of skirmisher and fancy using something Russian, the AKS-74U is calling your name! This bundle combines the superb CM.045 AKS-74U AEG from CYMA with a PBS-4 Suppressor and two spare 150rnd mid-cap magazines getting you ready to skirmish eastern style or as a mercenary/PMC. The PBS-4 is the caliber correct suppressor for the AKS-74U, giving you a professional setup which will impress the milsim inclined and avoid any of the "ACKCHYUALLY" moments. 

The CM.097A Platinum edition provides a complete, high-end AEG out of the box. With pre-upgraded features such as a Micro-switch trigger, MOSFET, and quick change spring system built into the premium gearbox the Cm.097A Platinum edition offers incredible performance and a package that is half the price of its rivals.