PTS Syndicate Airsoft

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. the new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

The MEC HOP rubber/bucking is precision moulded and has a slightly narrower inner diameter at the entrance and extra coverage for the top of the barrel cut area for a vastly improved air seal. This HOP rubber provides two points of contact with the bb with equal pressure on either side, improving effective range and consistency.

The all-new Dead Air suppressor range from PTS is here! An excellent suppressor with a true baffle system to give actual sound dampening to your platform. The new Dead Air is perfect for the Airsofter who's after adding that little bit of "designer touch" to their setup.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your Tokyo Marui EU17 GBB pistol. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide.

Accessorize your kit and show off your love for PTS with this PVC patch. Various colours available to match any style of kit.

The MEC M-Valve from PTS is designed to improve gas efficiency and speed up the cyclic rate of your KWA/KSC GBB pistol or SMG. The valve is constructed from high strength brass with rubber O-rings and should help improve the performance of your pistol in cold weather, and speed up the cyclic rate if you have installed a heavy steel slide or bolt.

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

If you are looking for a reliable way to mount an expensive GoPro or similar action camera to your helmet, you can't do much better than the MTEK FLUX shroud from PTS Syndicate. This shroud comes with an NVG mount, constructed from high strength fibre reinforced ABS polymer with an aluminium alloy insert for added strength.

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

Accessorize your kit and show off your love for PTS with this PVC patch. Various colours available to match any style of kit.

We get it, you've had AEG's for years & you want something that'll turn heads, that will tantalise your senses, send shockwaves through your body each time you pull the trigger, you want something  you can slap a mag into & hear that ear-pleasing *SHLUNK* as you release the bolt, we've got you covered. The Radian Model 1 by PTS is an excellent new member of the GBB family, it provides a great combination of both form & function and carries the forever glowing reputation of PTS in all its glory.