Specna Arms Airsoft

If you want to breathe new life into your AEG in the form of speed and torque, the Specna Arms BLDC Brushless Motor; Long is calling your name! The BLDC motor is the affordable option in Specna Arms' new brushless motor lineup, offering the same benefits as the top-end DARK MATTER™ motors with a more economical cast aluminium housing. This variant is the 27K option, offering 27,000 revolutions per minute, plenty for a high-speed build but also an asset to any DMR build requiring a high torque solution. 

Brushless Motors boast lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. This, the "long shaft" variant is designed for M4/AR-15 derived AEGs, G3, SMG-5 and P90 AEGs and is a relatively simple install job, though you may need to reinforce other parts to cope with the impressive torque and speed delivered by the BLDC motor. 

If you're upgrading your M4, G3, SMG-5 or P90 AEG and seeking more speed for a higher rate of fire or more torque for a better trigger response and the ability to pull strong DMR springs, the BLDC Brushless Motor from Specna Arms is the ideal affordable option!

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level.

This, the latest SA-C11 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level.

This, the latest SA-C11 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you're on the hunt for upgraded motors and need maximum speed and torque, the Specna Arms DARK MATTER™ Brushless Motor; Long should fit the bill. This Brushless Motor is Specna's top of the line offering, made with a CNC aluminium housing and available in ultra swift 39K RPM and the diabolically fast 48K RPM variants. This is the "long shaft" version, designed for use in M4/AR-15, SMG-5, G3 and P90 AEGs.

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you're on the hunt for upgraded motors and need maximum speed and torque, the Specna Arms DARK MATTER™ Brushless Motor; Long should fit the bill. This Brushless Motor is Specna's top of the line offering, made with a CNC aluminium housing and available in ultra swift 39K RPM and the diabolically fast 48K RPM variants. This is the "long shaft" version, designed for use in M4/AR-15, SMG-5, G3 and P90 AEGs.

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you are in the market for an M4/AR-15 optimised for woodland warfare this one would suit you well! The Specna Arms SA-B03 ONE™ replicates the real-world SR-16 rifle, a high-end M4/AR-15 rifle from the US. Like the original SR-16, the Specna Arms version boasts a 10.5-inch free-floated handguard known as the "URX2", an extended handguard with ample rail space, QD sling sockets built-in and perfectly suited to the modern C-clamp grip technique.

On the inside, the SA-B03 has been upgraded to handle stronger springs, sporting a steel quick change spring guide mounted on ball bearings for reduced rotational stress, an aluminium cylinder head and piston head, reinforced steel gears and a lightweight polymer piston with a full rack of steel teeth, plus the added benefit of the programmable Kestrel Basic MOSFET. If you are looking for a base gun for a DMR project this would do the job perfectly thanks to its 16-inch outer barrel and the Enter & Convert™ quick change spring system!

If you have misplaced a screw from your motor cage during upgrading/maintaining your version 3 gearbox, no need to hunt for the perfect screw! This screw set from Specna Arms provides all the screws necessary to attach your motor cage to the gearbox and secure the motor inside the cage.

The SA-H04 is an ultra compact PDW style Airsoft Gun, sporting a retractable PDW stock and a railed front end, the H04 is an excellent option for the player who needs a versatile primary that can handle CQC and medium range engagements. 

If you're a skirmisher who prioritises style, the Specna Arms SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU should suit you perfectly! This is the latest version of the SA-V26 Red Edition, with thoroughly revamped internals to keep it competitive with the latest Airsoft releases. The most prominent change is the addition of the Eshooter Kestrel Basic ETU, offering plenty of slick functionality previously reserved for far more expensive, high end replicas. 

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, bringing the latest iteration of the ONE™ series into line with EDGE™ and EDGE 2.0™ platforms with improved accuracy potential and the latest HOP-up unit design for M4 AEGs.

If you love an AR that stands out, rocking a customised look straight out of the box, the SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU is exactly that. An impressive reinvention of a popular previous release with the latest tech inside, this is the AR platform for skirmishers with a sense of style!

If you are having trigger trouble with your Specna Arms AR36 AEG, the solution is here! This unit is a replacement original part for the SA-G series of AR36 AEG rifles and will require disassembly of the gearbox to install, and soldering, as such it is only recommended for experienced techs and advanced users.

An electric powered Edge series replica from Specna Arms, complete with a full Aluminium/Zinc receiver and handguard and a GATE X-ASR MOSFET as standard.

This rifle is large and in charge! The Specna Arms SA-B16 ONE™ Mk 12 MOD.1 AEG; Kestrel Basic ETU is a big Airsoft rifle based on the Navy's real steel MK 12 MOD.1 Special Purpose Rifle. This rifle is ready for both assault rifle and DMR duties straight out of the box. The Kestrel Basic MOSFET offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection.

Inside the Specna Arms SA-B16 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

This is the most iconic assault rifle! There is a reason why this rifle has so many variations and is seen everywhere in Airsoft, it looks good, has plenty of rail space and is just a great overall platform for skirmishers. The Specna Arms SA-K02 ONE™ M4A1 AEG; Kestrel Basic ETU is an excellent choice for any Airsoft player, it shoots great out of the box, but there is also plenty of room for upgrades to take this rifle to the next level.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the SA-K02 ONE™ to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped M4A1 AEGs on the market!

If you are building a special forces loadout for your skirmishes and you're in search of an iconic platform to match the look, the Specna Arms SA-K02 ONE™ M4A1 AEG; Kestrel Basic ETU is the Airsoft replica for you!

An Aluminium, Zinc and Steel constructed Assault Rifle from Specna Arms, featuring their Enter and Convert quick change spring system which lets you quickly change your main spring once the Gearbox is removed from the body.

If you have a high-speed or DMR build planned with an AR36, AK, SG55x or AUG base gun, the Specna Arms DARK MATTER™ Brushless Motor; Short belongs inside! This beastly brushless motor is top-of-the-line in Specna's new motor range, offering a high-quality CNC aluminium housing with powerful brushless motor technology inside. This is the short shaft variant designed for AR36, AK, SG55x and AUG AEGs and is offered in 34K, 39K or 48K RPM flavours, ideal for any build objective which demands extreme speed and torque!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you have a high-speed or DMR build planned with an AR36, AK, SG55x or AUG base gun, the Specna Arms DARK MATTER™ Brushless Motor; Short belongs inside! This beastly brushless motor is top-of-the-line in Specna's new motor range, offering a high-quality CNC aluminium housing with powerful brushless motor technology inside. This is the short shaft variant designed for AR36, AK, SG55x and AUG AEGs and is offered in 34K, 39K or 48K RPM flavours, ideal for any build objective which demands extreme speed and torque!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

If you have a high-speed or DMR build planned with an AR36, AK, SG55x or AUG base gun, the Specna Arms DARK MATTER™ Brushless Motor; Short belongs inside! This beastly brushless motor is top-of-the-line in Specna's new motor range, offering a high-quality CNC aluminium housing with powerful brushless motor technology inside. This is the short shaft variant designed for AR36, AK, SG55x and AUG AEGs and is offered in 34K, 39K or 48K RPM flavours, ideal for any build objective which demands extreme speed and torque!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

The Specna Arms SA-C17 CORE™ HAL¹ ETU™ M4/AR-15 AEG is beautiful. It features Strike Industries licensing on its unique M-LOK handguard, adding to the realism of this mighty fine platform. Its compact nature makes it perfect for close-quarters battles, a versatile and lightweight replica which can be easily manoeuvred around the battlefield is exactly what you need to win!

This SA-C17 is rocking Specna's HAL¹ ETU, it boasts programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a super affordable Airsoft gun!

The Specna Arms SA-C17 CORE™ HAL¹ ETU™ M4/AR-15 AEG is beautiful. It features Strike Industries licensing on its unique M-LOK handguard, adding to the realism of this mighty fine platform. Its compact nature makes it perfect for close-quarters battles, a versatile and lightweight replica which can be easily manoeuvred around the battlefield is exactly what you need to win!

This SA-C17 is rocking Specna's HAL¹ ETU, it boasts programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a super affordable Airsoft gun!

An Airsoft Electric Gun based on the M4 platform, which offers Zinc/Aluminium externals, microswitch trigger, a quick change spring system and top spec components in one rock-solid package.

An absolutely stunning and hefty electric powered Airsoft 6mm replica based on a world-famous Navy Seals favourite. As you would expect from Specna, this replica doesn't compromise on quality, inside or out!

If you're looking for a compact and lightweight AR platform which is perfect for close-quarters engagements, the Specna Arms SA-C12 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C12 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're looking for a compact and lightweight AR platform which is perfect for close-quarters engagements, the Specna Arms SA-C12 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C12 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

Real steel nerds, check this out! The Specna Arms Rock River Arms SA-E03 EDGE™ Carbine AEG; Kestrel Basic ETU is a great beginner rifle, easy to pick up and use, superb long-term potential. There is a reason why this rifle style has so many variations and is seen everywhere in Airsoft, it looks good, has plenty of rail space and is just a great overall platform for skirmishers.

The Specna Arms Rock River Arms SA-E03 EDGE™ Carbine AEG; Kestrel Basic ETU is an excellent choice for any Airsoft player, it shoots great out of the box, but there is also plenty of room for upgrades to take this rifle to the next level. The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection.

Put simply, this allows the SA-E03 EDGE™ to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped M4A1 AEGs on the market!

Attention all sneaky skirmishers! The Specna Arms SA-A07 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is exactly what you are looking for, with its integral suppressor, it really doesn't get more covert than this. This platform also boasts full metal construction, making it hardwearing and sure to last in even the roughest of skirmishing conditions.

Inside the Specna Arms SA-A07 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

Oh boy....this....this is PEAK AR-15 levels! The firearms industry is ever evolving and Specna Arms are always following right behind and providing us with some the most beautiful Airsoft Rifles and Replicas we've ever seen, and THIS is one of them. This SA-A34 is a slimline, modern and super aesthetically pleasing AR-15 Airsoft gun, finished with stunning bronze features and a 13" M-LOK handguard and it's a dream come true for all you AR-15 fanatics and C-Clampers!

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it! 

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!