- CNC 7075 T651 Aluminium
- Steel QSC spring guide included
- A Gearbox shell for the pros!
Redesigned for maximum compatibility with a wide variety of brands, the RetroArms CNC QSC Gearbox V2 is ideal for technical Airsofters working on a high-performance build which needs to last a lifetime. The set includes a Version 2 gearbox shell, carbon steel screws and a steel ball bearing spring guide and is ideally used for extremely high ROF or FPS builds.
The shell itself is precision machined using CNC technology from the best aluminium around; 7075 T651, an ultra-hard alloy with similar strength properties to steel, boasting an ultimate tensile strength of 590 MPa compared to construction steel's 390 MPa. The quality of the machining simply cannot be overstated; every surface is flawlessly smooth and finished to perfection.
Not content with making an absolutely beautiful gearbox from the finest materials around, the team at RetroArms has also put a lot of thought into the design aspect, improving on the original Tokyo Marui V2 gearbox in several areas. The piston tracks and selector plate rails have been redesigned for wider compatibility, the front of the gearbox is enlarged in every dimension to improve strength, "glue pockets" have been added around each bearing hole so they can be glued in and wider internal wiring routes for heavy gauge wiring, along with much, much more. If you're the techy type seeking a slick gearbox shell to start your build, the RetroArms CNC QSC Gearbox V2 is exactly that!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The RetroArms CNC QSC Gearbox V2 is designed to facilitate pure performance, made from the strongest materials around and brimming with thoughtful design choices.
Designed with Performance and Endurance in mind, the 2-part Shell of this Gearbox has been precision CNC Machined from a billet of T651 Aluminium, resulting in a rock-solid and dependable Gearbox shell, capable of running high-performance builds, including M160 Springs.
The manufacturing process results in a near-flawless finish; Mounting Points and Holes are in exactly the right spot, ensuring that all your Gears, Bearings and other components fit precisely where they should. Whether youre a skilled Airsoft tech who likes to tinker with gearboxes, or simply want to scratch build the ultimate high-end performance gearbox, then this Version 2 CNC gearbox is the ultimate starting point for you to build upon.
Features
- High Quality CNC Machined finish
- Capable of supporting M160 Springs
- Quick Change Ball Bearing Spring Guide
- Control Windows allowing Adjustment of Angle of Engagement (AOE)
- Vision port for checking position of spring
- ASCU Trigger Contact Compatible
- High Quality Socket cap head machine screws
- Factory fitted alignment pegs to ensure both halve are properly aligned
- Access Ports allowing lubrication of gears
- High Quality Black anodised coating
- Accurately machined hole for Anti-Reversal Latch - helps prevent it falling out on assembly
- Micro grooves on pins, which hold trigger trolley spring and tappet plate springs
- NOT Compatible with MAXX cylinder heads
- Suitable for High FPS or ROF builds
Package Includes
- CNC QSC Gearbox V2 (2 halves)
- CNC Spring Guide
- Screws
Special Instructions
NO OTHER INTERNAL COMPONENTS ARE INCLUDED IN THIS SET
Please be aware that due to compatability issues, Retro Arms do not suggest using this CNC Gearbox with Classic Army Airsoft Electric Guns. For further information on compatability, or if you are having difficulty installing the gearbox, feel free to speak to our Workshop Team by calling 01484 644709
Specification
General
|
Parts & Accessories Type
|
Internal Parts
|
|---|---|
|
Internal Part Type
|
Gearbox
|
 |
 |
Construction
 |
Silver
|
|---|---|
 |
CNC Machined from billet aluminium AW EN7075 T651
|
|
Internal Part Construction
|
Billet Aluminium AW EN7075 T651
|
Part Specific
|
Part for Power Source Type
|
Electric
|
|---|---|
 |
AR
|
|
Package Includes
|
|
Electric Part Specific
 |
V2 Gearbox
|
|---|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.