NUPROL

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

An ultra thin and lightweight battery, designed to squeeze into AK compartments. The battery provides 1100mAh of power with a discharge rate of 40C.

Suitable not only for Airsoft but for RC vehicles and toys too, this 7.4v 1550mAh LiPo Stick Battery will fit in tight areas like stock tubes and handguards where other batteries wouldn't normally.

A baseball cap designed for use in airsoft skirmishes to protect the user's vision from bright sunlight. The cap is constructed from 100% cotton, is patterned and has several ventilation airholes to keep your head cool in the heat of the moment. 

A baseball cap designed for use in airsoft skirmishes to protect the user's vision from bright sunlight. The cap is constructed from 100% cotton, is patterned and has several ventilation airholes to keep your head cool in the heat of the moment. 

A baseball cap designed for use in airsoft skirmishes to protect the user's vision from bright sunlight. The cap is constructed from 100% cotton, is patterned and has several ventilation airholes to keep your head cool in the heat of the moment. 

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are not only BIO BBs, but are also Tracer BBs. These BBs are created with two purposes in mind. Firstly they are created from biodegradable materials so that they will gradually break down over time when exposed to natural environments as well as being infused with special materials to allow them to glow in the dark. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

A retention holster designed to fit snugly WE Europe 1911 Airsoft Pistols and can be attached to the users belt, designed to allow the user to quickly and effectively draw their Airsoft pistol during combat at maximum speed, whilst still remaining safe. 

Suitable not only for Airsoft but for RC vehicles and toys too. This Stick Battery is relatively large and excellent for ensuring you get a full day's play out of one charge, providing you're not too trigger happy.

If you have plucked too much or your case foam has got a bit dirty, NUPROL has the cure! The Essentials Hard Case Replacement PnP Foam is sized to fit their NUPROL Essentials Rifle Hard Cases perfectly and is an easy and affordable way to breath new life into an old and weary hard case.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

If you're adding a 40mm grenade launcher to your arsenal, you'll need at least one of these! The NUPROL 40mm MOSCART Gas Grenade is compatible with Airsoft 40mm MOSCART grenade launchers and is powered by green gas with various BB capacities available. Options include 60, 72, 84, 96, 108 and 120rnd versions, with all BBs being dispensed at once in an inescapable cloud. Shoot this down a hallway and no one will escape!

The grenade can be loaded using a speed loader through the apertures on the front and the gas fill valve is also on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs. As with green gas magazines, lubrication is required (100% silicone lubricant recommended) to keep the seals fresh in the long term. 

If you have a habit of killing LiPo batteries by running them on too low a voltage, or you would rather not take the chance, a LiPo voltage monitor would be a good call! This device connects to the balance port of your 7.4V or 11.1V Airsoft LiPo and will provide a readout of the voltage of each cell, together with the total battery voltage. This device will also emit an alarm if the cell voltage becomes unbalanced or drops too low, preventing you from damaging your batteries and having to purchase new ones more often than you should. To use the device, you will need to plug the balance lead (small white connector) of your LiPo battery into the leftmost contacts, with the contacts oriented to face downwards. The visible silver contacts on your balance lead should be facing upwards.

A lightweight Polymer mount for FAST, BUMP and MICH Airsoft helmets that have a front mount, allowing you to attach GOPRO cameras to record your gameplay. 

A simple carry case with a padded and soft lining to protect your pride and joy. Designed with a large compartment and padded outer walls its sure to not only make transporting easier but protect anything you choose to store in it.

An 11.1v 1200mAh 20c LiPo Battery in a Slim Stick configuration, complete with a Deans Connector. It has total dimension of: 1.35cm x 1.62cm x 18.5cm and is perfect for up-rated guns and rifles with a high power draw such as DMRs and high rate of fire setups, and other replicas that require a Stick Battery down the Receiver, such as AK/UMP models.

An 11.1v 1200mAh 20c LiPo Battery with a Deans Connector in a Stick configuration, making it ideal for Solid Stocks and some rear wired Buffer Tubes. It has the following dimensions with a 9cm cable: 2cm x 1.63cm x 13cm.

A pack of Shotgun Shells designed for Airsoft 6mm Pump Action Shotguns which accept Standard Shotgun Shells. 

The shells are easily loaded from the top, by using an Airsoft Speed Loader, by simply pushing the nozzle into the Shell's top hole and filling. These shells are a must have purchase for any Airsoft Skirmisher who has a pump action Shotgun, as it allows you to play for longer without having to stop to reload magazines.

A baseball cap designed for use in Airsoft skirmishes to protect the user's vision from bright sunlight. The Cap is constructed from 100% Cotton, is coloured and has several ventilation air holes to keep your head cool in the heat of the moment.

A baseball cap designed for use in Airsoft skirmishes to protect the user's vision from bright sunlight. The Cap is constructed from 100% Cotton, is coloured and has several ventilation air holes to keep your head cool in the heat of the moment.

A Velcro and stud-button secured double 40mm pouch which can carry two 40mm grenades, and mounts onto MOLLE compatible platforms.

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel.

For all you AUG lovers out there wanting to keep shooting with the need of winding. This magazine can hold up to 80 rounds and is filled from the top using a speed loader. Featuring a  classic waffle design, the mag makes it easier to grip and quicker to remove from pouches. The magazine works via a spring system, so when filled with BBs will not Rattle, unlike hi-cap magazines.

This is the perfect magazine for those who have a Steyr AUG Airsoft AEG and want more magazines so they can keep playing for longer without reloading.

A Polymer constructed adapter for the NUPROL Fastloaders, which lets you refill SMG-5 series magazines rather than just M4 magazines. This is great news for anyone who runs an SMG-5 series Airsoft Gun and has a tonne of magazines that all need filling up before games. Or maybe you just don't like to carry spare magazines, and need the ability to quickly top up your mags on the move. Either way, if you have a NUPROL Fastloader and want to use it on something other than M4 magazines, you need one of these adapters.

A retention holster designed to fit and snugly hold EU-Series pistols with one neat trick up it's sleeve... It will happily accept a pistol with a torch or laser mounted on to it. Flashlight/laser users will know the pain of limited holsters being available, so it's great to combine the flexibility of a fabric holster with the convenience and tacticool features of a moulded retention holster.

A spare magazine for AR36 Airsoft Guns, which has the option of either a standard 125rnd capacity, or a realistic 30rnd capacity by flicking a switch.

A LiPo crane stock battery designed to fit in crane and solid stocks, where other batteries would be wasting the available space. 

A lightweight and tough protective carry case from NUPROL, which features PnP ( Pick & Pluck ) foam internals as well as sliding catches and padlock loops.