NUPROL

High quality mesh goggles, allowing you to protect your eyes during Airsoft Skirmish or Military re-enactments without the risk of steaming up, obscuring your vision, like with plastic lens goggles.

If you need a pair of Airsoft goggles which fit over your glasses you are in luck! The NUPROL Battle Visor Full Seal Goggles fit over most prescription eyewear and are full seal goggles with an adjustable head strap. The head strap allows for wearing the goggles both over and under a helmet, and the foam surrounding the frame is skin-safe material which should be comfortable in all weather conditions.

The frame is constructed from polymer and the lens from polycarbonate with an anti-fog coating which should keep fog at bay for the first few uses, meaning a clear view of the unfortunate target. The goggles are rated CE EN166, capable of resisting low energy impacts and are rated 1 for high optical clarity, meaning practically no vision distortion and full light transmission. If you prefer a larger pair of goggles with full seal for maximum protection, these will do the trick!

If you need a pair of Airsoft goggles which fit over your glasses you are in luck! The NUPROL Battle Visor Full Seal Goggles fit over most prescription eyewear and are full seal goggles with an adjustable head strap. The head strap allows for wearing the goggles both over and under a helmet, and the foam surrounding the frame is skin-safe material which should be comfortable in all weather conditions.

The frame is constructed from polymer and the lens from polycarbonate with an anti-fog coating which should keep fog at bay for the first few uses, meaning a clear view of the unfortunate target. The goggles are rated CE EN166, capable of resisting low energy impacts and are rated 1 for high optical clarity, meaning practically no vision distortion and full light transmission. If you prefer a larger pair of goggles with full seal for maximum protection, these will do the trick!

If you are sick of straps getting entangled and you want an easier-to-don face protection option, the NUPROL Balaclava Mesh Mask would be a fine choice. Providing a sweat-wicking breathable balaclava-style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava-style design helps take the sting out of those back-of-the-neck and ear hits too!

The mask can either be worn over the head or just over the nose and mouth for improved airflow in hotter weather and can even be kept around the neck in outdoor skirmishes and pulled up for close encounters so you can keep your pearly whites intact. If you've had enough of standard strapped face protection, this is the perfect replacement.

A retention holster designed to fit snugly WE Europe EU Series Airsoft Pistols and can be attached to the users belt. The holster is designed to allow the user to quickly and effectively draw their pistol during combat at maximum speed, whilst still remaining safe. 

If you need a pair of Airsoft goggles with prescription lens inserts included, the NUPROL Battle Visor Full Seal Goggles with Prescription Insert are probably the cheapest option out there right now! While we never advise people to buy cheap eye protection, you can rock the Battle Visor with confidence thanks to its EN166 rating and polycarbonate lens!

The head strap is made from comfortable elastic and allows for wearing the goggles both over and under a helmet, and the foam surrounding the frame is skin-safe material which should be comfortable in all weather conditions.

The frame is constructed from polymer and the lens from polycarbonate with an anti-fog coating which should keep fog at bay for the first few uses, meaning a clear view of the unfortunate target. The goggles are rated CE EN166, capable of resisting low energy impacts and are rated 1 for high optical clarity, meaning practically no vision distortion and full light transmission. If you prefer a larger pair of goggles with full seal for maximum protection, these will do the trick!

A replica PEQ-15 device from Nuprol that provides torch illumination, a visible red laser pointer and IR laser pointer - all in one compact package!

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

A hard carry case designed for any assault rifle sized replica Airsoft gun, but will suit a wide range of firearms from Airsoft,  Air rifles and real firearms. 

A hard carry case designed for any assault rifle sized replica Airsoft gun, but will suit a wide range of firearms from Airsoft,  Air rifles and real firearms. 

A Lithium Polymer battery for Airsoft, RC Cars and many other hobbies which comes as a Crane Stock configuration with a Deans connector. This battery is perfect for rear wired Crane Stocks and front wired handguards, and especially AEGs that require an 11.1v battery.

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping.

A can of silicon spray lubricant which is used to maintain your Airsoft Guns and Parts. The silicon lube comes in a spray can and contains 180ml of Silicon Lubricant.

A pack of 2 3V Lithium CR123A batteries which are suitable for a wide range of Airsoft red dot sights, tactical flashlights and other Airsoft/photography accessories.

Be safe while charging your Airsoft batteries! If it goes wrong, it really goes wrong. The NUPROL LiPo Safe Storage Charging Bag is designed to store LiPo batteries and other Lithium batteries plus their charger during the charging process, reducing the chances of damage in the event of a LiPo / Battery fire. Better to be safe than sorry!

This charging bag is the perfect size to hold a charger and a battery when charging or to store some batteries when they are not in use.

If you are looking for an Airsoft starter kit with everything you need to get skirmishing included, you have found it! The Delta Pioneer Starter Bundle includes the impressive NUPROL Delta Pioneer Defender AEG, an M4/AR15 platform made from robust high density polymer with a rock solid metal V2 gearbox and a 6.03mm tightbore inner barrel, giving you a lightweight and strong starter platform with little to go wrong and superb performance out on the field. The Defender in this package is in VCRA compliant Pre Two-Tone blue, making it ideal for those who don't have their UKARA membership yet. Being a Pre Two-Tone means you can order today and have your AEG by tomorrow, avoiding the waiting time for our two tone service!

The Defender is packaged with a 8.4V 1600mAh Ni-MH Battery and Charger, giving you a reliable power source and all the performance you could want!

Also included with the set is a bag of Delta Armory's 0.25g BBs which are the go-to weight for most Airsoft skirmishers, offering superb wind resistance for shooting outdoors with enough projectile speed to give the enemy nowhere to run! Delta Armory BBs are widely regarded as some of the best out there, and are a staff favourite with their highly polished surface providing excellent accuracy and their ultra-tight tolerances which minimise the chances of a jam.

This bundle includes everything you will need to get stuck in and get off to a flying start on your Airsoft adventure; the only thing left to buy is your choice of eye protection!

A set of protective Glasses for Airsoft use, which are made from a High Impact Resistant Polycarbonate to EN166 Eye Protection Standards.

These heavily smoked/tinted Glasses are made using High Impact Resistant Polycarbonate to EN166 Eye Protection Standards, and also feature UV 400 Protection to keep your eyes safe from harmful sun-rays.

A thin and lightweight battery, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c and is so thin it can fit into stock tubes and AK/MP5 AEG Battery compartments.

A stick 7.4v 1100mAh LiPo designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries, intended to allow Airsofters to get the best possible performance from their Airsoft Electric Guns.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 450rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams a whopping 150 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

A new electric 6mm airsoft rifle made by NUPROL as a budget entry level RIF but without compromising on quality, and is constructed from polymer this weapon is light weight but tough enough to handle the rigors of an airsoft skirmish. The gun is available in a variety of colours allowing you to pick the perfect gun to match your kit.

The gun features plenty of rail space for attaching aftermarket external parts for customisation, with plenty of options for upgrades available this gun simply cannot be ignored.

The NUPROL LEGION Multi-Model Polymer Holster is constructed from a tough polymer and features a locking retention design that will hold your pistol securely in place until you need it. The holster is compatible with almost every GBB pistol on the market, making it perfect for those who own multiple pistols and like to change things up from time to time.

The holster can be fitted to any belt, MOLLE or not, provided it is less than 2-inches in width, and the rotary interface via which the paddle mount fits to the holster allows you to install the holster onto alternative mounts such as drop leg or shoulder harness setups. If you are a pistol fanatic with a massive collection and want one holster to rule them all, the NUPROL LEGION Multi-Model Polymer Holster is exactly what you were looking for!

The largest hard case produced by NUPROL allowing you to store some serious fire power including sniper rifles! A must for those who want to truly care for their pride and joy.

An unique futuristic hard Polymer lower face mask with mesh ventilation for use in Airsoft. 

An unique futuristic hard Polymer lower face mask with mesh ventilation for use in Airsoft. 

An unique futuristic hard Polymer lower face mask with mesh ventilation for use in Airsoft. 

If you are a midcap user you will know all too well the struggle to quickly reload your magazines between games. Thankfully, NUPROL has the answer! Introducing the 3000rnd BB loader, a design based on existing crank-operated speedloaders but in a more compact form with almost double the capacity!