Novritsch Accessories

The Novritsch SSG10 Spring Guide is the perfect spare part for your SSG10 sniper rifle. It is compatible with all versions of this platform (A1, A2, A3). Its one-piece machined steel construction means that you will never have to worry about this spring guide breaking or unscrewing. The spring guide has the 13mm diameter spring standard, which means your SSG10 will have the maximum spring return efficiency, perfect for hitting those shots consistently!

Whether your SSG10 is out of action and in need of repair, or you fancy a spare part for peace of mind, the Novritsch SSG10 Spring Guide is the perfect piece to pick up for you sneaky snipers!

If you are looking for a sneaky aesthetic and reduced muzzle report, the Novritsch Rifle Suppressor will give you just that! This suppressor is constructed from aluminium and has internal baffles made from acoustic foam which will reduce the muzzle report of your primary and make you harder to locate.

The Novritsch Rifle Suppressor is compatible with any Airsoft gun which uses 14mm CCW male barrel threading and has an aggressive ported front end, providing some visual interest to the design which marks it out as something a bit different from the usual, boring tube suppressors.

On the inside, Novritsch has gone above and beyond, using 2 different sized baffles to muffle the muzzle report, widening at the end to prevent BBs from shattering inside and ruining that perfect shot. The front cap can also be removed, so if you want to change the filling to your own secret suppression formula, you are free to do so. Whether you are taking your sniper rifle build in a sneaky direction or you are creating an assault rifle with an emphasis on stealth, the Novritsch Rifle Suppressor is the perfect finishing touch!

If you're running the incredibly swift SSR9 AEG from Novritsch, you'll need loads of these to keep it fed! The Novritsch 120rnd Magazine for SSR9 AEG is constructed from high density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The slim design of these magazines allows you to carry plenty, and it goes without saying, you'll need a lot of these mags to keep up with the SSR9 DSG's insane rate of fire!

The Novritsch Maintenance Kit Gen2 is a must-have piece for any Airsoft enthusiast. This kit contains all the necessities for keeping your Airsoft guns in pristine condition, both cosmetically and functionally. Keeping your guns well maintained will give you the competitive edge over other skirmishers and keeping your gear clean is a must to minimise any potential damage from dirt and grim, ensure victory and the longevity of your Airsoft replicas with the Novritsch Maintenance Kit Gen2. 

Novritsch has not missed a beat with this maintenance kit, it contains lubricating oils and grease, cleaning alcohol and wipes, a cleaning rod with a ruler, nylon slotted tips and cotton mop brushes. All this is contained in a handy bag which has additional space for other tools or accessories that you deem crucial for looking after your favourite Airsoft guns. 

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

If your tools are a disorganised mess, maybe it's time to start from scratch. The Novritsch Airsoft Tool Kit (S2 Steel) provides only the tools you'll need for working on Airsoft guns, neatly contained inside a magnetically sealed polymer hard case. 

Included in the set you'll find a modular screwdriver with an extension for hard to reach places, a set of tweezers for delicate work, a valve key for valve maintenance and 48 S2 tool steel bits covering all the most common tools used for Airsoft maintenance and disassembly. 

If you want to keep your Novritsch Hi-Capa in the game for longer, load up on these! The Novritsch 30rnd Magazine for Hi-Capa GBB Pistols; V3 is compatible with most Airsoft Hi-Capa GBBs and ideal for SSP1, SSP2 and SSP5 platforms from Novritsch. Like other green gas magazines, the fill valve is on the baseplate, requiring both the magazine and your gas container to be inverted to fill. 

Loading BBs can be carried out either through the feed lips or the follower channel when the follower is pulled and held down, either using a speed loader or by hand. If you're running a Novritsch 'Capa, a few of these are essential to keep it doing what it does best!

If you want to carry extra gas on the field but don't want a clumsy and cumbersome gas can on your rig, the Novritsch Portable Gas Container is the right tool for the job. This convenient and compact gas canister can hold any type of Airsoft green gas, even the highest-pressure black gas (don't fill it with CO2 though!) and fits into most grenade and smoke grenade pouches.

The Container includes an aluminium cap which threads onto the top to protect the nozzle and a high-density foam ring to further protect the nozzle when stowed. Filling the container is as simple as it is any gas magazine, simply invert the canister and fill through the fill valve at the base.

If you're involved in longer skirmishes or like to keep a bit of extra gas handy to avoid the "dead man's click", the Novritsch Portable Gas Container belongs in your kitbag!

If you're looking for an excellent medium to long-range optic with adjustable zoom and focus to handle targets that may get a little too close for comfort, then the Novritsch 1-4x Variable Scope “LPVO” is exactly what you require. This magnified riflescope is an LPVO (Low Power Variable Optic), meaning it offers variable magnification from 1x up to 4x, ideal for medium-range engagements mounted on an assault rifle, DMR or sniper rifle.

This Novritsch LPVO offers windage and elevation adjustment via a pair of tactile adjustable turrets, along with a choice of red or green reticle illumination in 5 brightness settings. There is no CR2032 included with this scope. It also has a fast focus dial around the eyepiece with a throw lever for easy adjustments with gloves so you can get a clear view at various engagement ranges. With a Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube, this LPVO is ready to mount straight out of the box!

This scope has been tested with real steel firearms by the Novritsch team and it proved it was more than "just an airsoft scope". Being able to withstand the force and kickback of some real steel beasts. The video attached shows its capabilities

If you're running the super speedy Novritsch SSR9 DSG, you'll need some magazines to keep it well-fed! The Novritsch 120rnd Transparent Magazine for SSR9 AEGs is a mid-cap magazine constructed from transparent brown polymer, keeping the material strong while allowing you to keep track of how many BBs remain. 

Like other Airsoft mid-caps, the SSR9 Transparent magazine can be loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. When filled, this spring-loaded mid-cap won't rattle and give your position away, making it great for skirmishers who prioritise stealth and like to avoid the "tactical maracas" noise of high-cap mags. Keep your SSR9 in the fight for longer with the Novritsch 120rnd Transparent Magazine for SSR9 AEGs!

If you're in need of high performance, high accuracy BBs for your Airsoft Sniper Rifle then look no further! These Novritsch 0.46g 6mm biodegradable BBs come in a resealable bottle of 530 BBs and come pure white in colour.

BBs are a crucial factor when it comes to accuracy, a high quality BB can mean all the difference and Novritsch certainly doesn't disappoint. These BBs are second to none when it comes to long range engagements. The pure white colour allows you to track the full trajectory of the BBs no matter how far they travel. With Novritsch ensured quality control you can be sure you are getting only the most premium biodegradable BBs. The slick plastic bottle that these BBs are stored in allow for convenient transportation and also excellent compatibility with speedloaders.

Do you often find yourself in disbelief when heinous skirmishers won't take their hits? Or maybe you are looking for an effortless way to compile a highlight reel mid-battle? The Novritsch ClipCam Cheater-Catcher is the best solution for capturing quick 16-second clips at the press of a single button. It captures all videos at a resolution of 1080 by 1080 and 60 frames per second; this is perfect for social media posts to show off your skills, or expose those dishonourable Airsoft skirmishers who won't confirm they have been hit.

This low-profile camera can be mounted onto a Picatinny rail and will sit lower than most red dot sights meaning that your view won't be obstructed. Captured clips can be accessed and downloaded by plugging the camera into a PC or laptop, or with the Novritsch: Product Companion mobile app. The camera itself has 30GB of storage so you have plenty of room to capture all the highlights from your day of skirmishing!

If you're looking for a suppressor which departs from the norm with a futuristic profile, the Novritsch Rectangular Modular Suppressor V2 is the one. This CNC aluminium suppressor boasts an acoustic foam filling for effective sound dampening and can be reconfigured into 3 different lengths to suit any build objective. 

This version of the Modular Suppressor V2 mounts to either 14mm CCW male threaded outer barrels or 16mm CW threaded outer barrels depending on the variant you choose, meaning an easy fit on most AEG assault rifles and SMGs and a specific variant for MK23 and SSX23 NBBs. Its lightweight nature makes it ideal for GBB pistols with tilting barrels, and we recommend using the shortest configuration for the best possible gas efficiency. Included in the set are a pair of additional bolts, allowing you to use the suppressor at full-length (170mm), mid-length (110mm) and ultra-short (80mm) configurations. If you need a suppressor with a modern look to suit your cutting-edge build, the Novritsch Modular Suppressor V2 is ideal!

If you're running an upgraded Sniper Rifle or one of Novritsch's fantastic pre-upgraded platforms, the Novritsch 0.40g 6mm Sniper BIO BBs will help you get the most out of your setup. Supplied in a speedloader-friendly resealable bottle of 530 rounds with an O-ring sealed top, even the bottle of these BBs is designed to give you the best possible accuracy by keeping dirt and debris out and your BBs clean and ready (even as you are clean and ready!). 

Ideal for platforms with upgraded HOP-up parts like the SSG96, SSG10 series and SSR63 A3, Novritsch's BBs boast tight tolerances and a finely polished surface for maximum accuracy. These are the biodegradable version, perfect for strict skirmish sites and guilt-free sniping. Feed your sniper rifle with the ammo it deserves!

If you want your SSP18 to stand out, the Novritsch SSP18 Compensator; 14mm CCW is what you need. This CNC Aluminium compensator boasts two ports at the top and swept-back fluting on each side, giving it a speedy look ideally suited to the SSP18 aesthetic. This comp is designed specifically for the SSP18 but mounts to its 14mm CCW male threaded barrel, meaning it can be used on other platforms but compatibility is not guaranteed. 

With numerous colour options available to suit any taste, the Novritsch SSP18 Compensator is a great way to customise your SSP18 and make it truly yours. Paired with Novritsch's magwell, outer barrel and other colourful CNC aluminium parts, you can turn your SSP18 into a unique beast and even use the comp to hide an extended 130mm inner barrel for more accuracy and muzzle energy. 

If you want your SSP18 to stand out, the Novritsch SSP18 Compensator; 14mm CCW is what you need. This CNC Aluminium compensator boasts two ports at the top and swept-back fluting on each side, giving it a speedy look ideally suited to the SSP18 aesthetic. This comp is designed specifically for the SSP18 but mounts to its 14mm CCW male threaded barrel, meaning it can be used on other platforms but compatibility is not guaranteed. 

With numerous colour options available to suit any taste, the Novritsch SSP18 Compensator is a great way to customise your SSP18 and make it truly yours. Paired with Novritsch's magwell, outer barrel and other colourful CNC aluminium parts, you can turn your SSP18 into a unique beast and even use the comp to hide an extended 130mm inner barrel for more accuracy and muzzle energy. 

If you're looking for a tiny LiPo battery for your Novritsch SSE18 or CYMA CM.1xxS MOSFET equipped AEP, this is what you need. The Novritsch 7.4V 600mAh LiPo Battery measures approximately 7.3 x 1.5 x 1cm and is pre-wired with a Mini-Deans battery connector and a 3 port balance connector. 

As with other LiPo batteries, this battery should only ever be charged on a LiPo balance charger, preferably in a battery charging bag and should not be left on charge unattended under any circumstance.

The Novritsch 32rnd Gen.3 Gas Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas which is refilled at the bottom. The BBs are loaded into the magazine by pulling down the spring tab and filling the BB chamber with a speedloader. This mag has a 1-stage valve and a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 32rnd Gen.3 Gas Magazine for SSX23/303 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

If you're running an upgraded Sniper Rifle or one of Novritsch's fantastic pre-upgraded platforms, the Novritsch 0.43g Sniper BBs will help you get the most out of your setup. Supplied in a resealable bottle of 530 rounds with an O-ring sealed top, even the bottle of these BBs is designed to give you the best possible accuracy by keeping dirt and debris out and your BBs clean and ready (even as you are clean and ready!). 

Ideal for platforms with upgraded HOP-up parts like the SSG96, SSG10 series and SSR63 A3, Novritsch's BBs boast tight tolerances and a finely polished surface for maximum accuracy. Feed your sniper rifle with the ammo it deserves

If you need mags for your SSR77, these are the ones! The Novritsch 180rnd Magazine for SSR77 AUG AEGs is constructed from translucent brown high density polymer with an olive green baseplate, just like real AUG mags. The mag holds 180 BBs loaded through the fill/feed port on the top using a speed loader or loading tool. 

Being a mid-cap magazine, you won't get any battle rattle from this mag despite its respectable 180-round capacity. Compatibility-wise, this mag should fit the majority of AUG AEGs on the market and is ideal for the super speedy Novritsch SSR77 range!

The Novritsch 24rnd Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, Y&P, Stti, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas and can be refilled at the bottom, the BBs can be inserted into the magazine by pulling down the spring tab and filling up the BB chamber with a speedloader. This mag comes with a 1-stage valve and has a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 24rnd Magazine for SSX23/MK23 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

Suppose you need something to support the weight of your hefty sniper rifle, the Novritsch Split M-LOK Bipod is exactly what you need! Platforms like the Novritsch SSG10 A2 feature M-LOK rail systems on either side of their handguard so mounting a bipod can sometimes be tricksy. The split design is the perfect remedy, it allows you to mount a single bipod leg on either side of your platform, providing support on even the heftiest of M-LOK rail system platforms!