Airsoft Hop Up Units & Buckings

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you use heavy BBs and really want to send 'em, the Maple Leaf MR HOP Bucking for AEG belongs in your build! The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, the MR HOP is designed to fit most Airsoft AEGs but as always, a certain level of expertise and tuning will be required for installation. If you're committed to long-range leaning and want your primary performing at its best, the Maple Leaf MR HOP Bucking for AEG is essential!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

If you're jealous of GBB users running the superb Crazy Jet inner barrel, the Maple Leaf Hot Shot HOP-Up Bucking for AEG will level the playing field! This HOP-up bucking is designed for use with standard AEG HOP-up units paired with Maple Leaf's GBB/VSR type Crazy Jet inner barrel, boasting a wedge-shaped concave contact patch with nubs on either side to encourage consistent BB chambering.

While the Hot Shot Bucking may work with other GBB/VSR type inner barrels, it is not compatible with standard AEG inner barrels. Multiple degrees of hardness are available, with an option for almost any BB weight and muzzle energy combination. If you want the performance benefits of the Crazy Jet barrel with your AEG, the Maple Leaf Hot Shot HOP-Up Bucking is essential!

Compared to the Autobot, this hop up rubber is far stronger and has a flatter shaped contact patch inside. 

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!

If you want your sidearm to be capable of really reaching out, a HOP-up upgrade should be top of your list! The Maple Leaf HOP-up Chamber for VFC/WE/TM EU-Series GBB is constructed from alloy and supplied with a steel HOP-up arm and aluminium "I-key" style tensioner, promising tighter tolerances than the stock HOP-up unit which should translate to better air seal qualities, consistency and thus better accuracy downrange.

This set is compatible with VFC, WE and Tokyo Marui EU-series GBB pistols but should also fit most Tokyo Marui clone EU-series pistols, though as always, we recommend upgrade parts only for the knowledgeable and confident!

A pre-built drop in hop-up unit and barrel set up built by Maple Leaf with their best parts already included in it. The kit can be dropped into any Tokyo Marui / KJ Works M1911 / MEU Series gas blowback Airsoft pistol for instant results. The set includes an alloy Hop-Up unit, 60 Degree hop-up rubber and Crazy Jet Inner barrel for high performance and improved accuracy. This is perfect for those who are looking to upgrade their pistol with minimum effort.

An aftermarket upgrade/replacement Inner Barrel and HOP Unit/Rubber for Hi-Capa Series Airsoft Pistols, specifically the Army Armament R601. This awesome package provides you with a Precision 6.02mm Inner Barrel, as well as a HOP Chamber, ML 70° Bucking and 'I-Key Delayer', to improve range, accuracy and precision.

The installation of this unit is relatively straightforward, and will be compatible with beginner/experienced techs.

Whether your HOP-up rubber is worn out or you are seeking an upgrade, the Novritsch HOP-up Bucking for SSP1/SSP5 GBB pistol is one to keep an eye on. This HOP-up bucking is a big reason that Novritsch pistols have such incredible range, and being a VSR/GBB style HOP-up rubber, this should be compatible with most TM-based GBB pistol designs as well as the VSR-10 sniper rifle series.

The Maple Leaf MR HOP-up Bucking is widely regarded as the best HOP-up bucking offered by Maple Leaf, offering a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect and an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design intended to prioritise range over grouping size and the ideal pairing for the Maple Leaf I-Key. This bucking is compatible with Tokyo Marui-based GBB and VSR platforms, WE and VFC GBBRs and as always, we only recommend upgrade parts for those who are confident working on their platform's internals. If you want to extend your range out to the borderline implausible, the Maple Leaf MR.HOP HOP-up Bucking will do the trick!

If you are looking to upgrade your HOP unit, in most cases these days there isn't much to gain if you already have a rotary unit in your gun. This is the exception! Krytac has taken the rotary HOP unit and added in audible and tactile clicks when you adjust, locking the unit in its set position and allowing you to adjust accurately even in low light conditions! The unit also has engraved numerical setting indicators around the adjuster, allowing you to keep track of which setting works best with which BB weight, avoiding the trail and error! This package also includes a KRYTAC HOP rubber.

If you want your Hi-Capa to shoot like a beast, the Maple Leaf Steel HOP-up Chamber Set for Hi-Capa GBB Pistols belongs inside. This steel HOP-up chamber should improve consistency and air seal by tightening tolerances between your HOP-up bucking and air nozzle and is far stronger than standard alloy HOP-up units as a bonus. 

Included in the set is an enhanced HOP-up arm, a CNC machined adjuster dial and the legendary Maple Leaf I-Key which is designed to provide a "flat HOP" effect and is ideally used with heavy BBs (0.28g+). Compatibility-wise, this unit is designed for Tokyo Marui Hi-Capa GBB pistols and should fit most other Hi-Capas, though modification and tuning may be required. If you want to use your Hi-Capa as a primary and need range to compete with rifles, the Maple Leaf Steel HOP-up Chamber Set for Hi-Capa GBB Pistols is ideal!

A high quality replacement Hop up rubber, made to 50 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

A high quality replacement Hop up rubber, made to 70 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

An absolute monster of an upgrade to make to your weapon. The external surface is ribbed to keep your inner barrel more stable inside your hop up unit with next to no play at all after you have fully re-assembled your Airsoft weapon.

This TDC hop up chamber from TTI is made from CNC aluminium, it is made for Hi-Capa GBB handgun replicas from Tokyo Marui / WE. This hop-up chamber has a TDC adjustment system operated via a notched wheel at the bottom of the chamber.

A 50 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

If you are building an Airsoft DMR this enhanced HOP-up rubber set from Laylax Prometheus should be on your shopping list! Laylax Prometheus has a fantastic reputation for enhanced HOP-up buckings, providing the Purple bucking used in the Bolster Armouries ONYX AEG series thanks to Prommy's wealth of experience and pedigree. We love them, and we think you will too!

This bucking is designed for builds shooting at 350-400 FPS, putting it right in the sweet spot for DMRs. When installed, this set should improve range, enhance air seal and allow for heavier weights of ammo to be used. Compatibility-wise, this should fit the vast majority of Airsoft AEGs which use the standard TM AEG style HOP-up bucking/rubber and nub, which is almost all of them!

Are you having HOP-up troubles with your ARCTURUS AK platforms? This is exactly what you need! This HOP-up chamber is a complete replacement part and comes with the necessary pieces for installation. The main chamber is made from a sturdy plastic polymer and is compatible with ARCTURUS AK AEGs which have V3 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

We only recommend installing this HOP-up unit if you are confident in your abilities, some parts are small and installation must be precise.

Fix your AK replica's damaged HOP-up with the ARCTURUS Rotary Hop-Up Chamber For ARCTURUS AKs and you will have your replica shooting prime and proper in no time!

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from Brass and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle. It also comes with a guide rod stability rod which improves accurancy and follow up shots. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!

This is a replacement HOP-up rubber for the Novrtisch ''Full thrust'' SSG10 Sniper rifle and is only compatible with this platform due to the increased size of the HOP-up chamber and inner barrel. It is the perfect replacement piece to increase the lifespan of your Full Thrust SSG10 and have it shoot like a laser on the battlefield. 

If you're noticing a dip in your SSG10 Full Thrust Sniper Rifle and you want a quick fix that is affordable, the Novritsch SSG10 Full Thrust Bucking is here for you!

A 70 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!