G&G Armament Airsoft

An Airsoft 6mm BB Gun, based on the M4 / AR Platform, which is a great entry grade Beginner weapon for those looking to start playing Airsoft, or even simply Backyard Plinking.

This is not only the perfect purchase for a beginner, but as a spare or backup gun for Experienced Players, due to its hard wearing and reliability.

If you are looking for some extra firepower for your PCC45 or MXC9 AEG, you have found it with G&Gs drum magazine! With a whopping 1500 round capacity, you will easily have enough BBs on board to keep the entire enemy team's heads down! Nothing makes a high-rate of-fire beast as sweet as having a serious volume of ammo to feed it with! 

A simple spare additional or replacement magazine for your G&G G2H Airsoft AEG. With a 40rnd real steel capacity limit, yo u can run and gun with zero BB rattle whilst sniping away with your electronic powered AEG.

An Airsoft 6mm BB AEG gun, powered by electric and is a replica of the M4A1 Assault Rifle with custom parts. The weapon is primarily constructed from Lightweight yet durable Polymer, with Alloy Parts and Internals. 

An Airsoft 6mm BB AEG gun, powered by electric and is a replica of the M4A1 Assault Rifle with custom parts. The weapon is primarily constructed from Lightweight yet durable Polymer, with Alloy Parts and Internals. 

An Airsoft Electronic 6mm BB Gun, based on the AK74 with more Tactical and Modern Features than the standard design and features G&G's new ETU and MOSFET Control System. 

A  Full polymer constructed High Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to spends more time shooting rather than reloading. 

A drop-in trigger, ETU & MOSFET for Version 2 compatible rear-wired Airsoft replicas, which includes features like a programmable trigger, low battery cutoff, shot sensor and comes included with a vertical 'speed trigger'.

If you're having issues with your AEG, and being able to pull the trigger in safe then it is likely your safety lever is bust! The G&G Armament Trigger Safety Lever For V2 Gearbox is the replacement part for you, a new safety lever will ensure that the trigger cannot be depressed while your AEGs safety is engaged.

This part is constructed from alloy and is compatible with all version 2 gearboxes. It includes the spring and the screw so you can install it all together. Be warned though, it can be a techy repair and we only recommend that professionals attempt it!

If you've had a cut-off lever failure or you like to keep parts on hand just in case the worst happens, the G&G Armament Cut Off Lever For V2 Gearbox is perfect. This is a replacement original part constructed from alloy, compatible with most version 2 gearboxes on the market.

The cut-off lever is a piece that sits between your trigger and sector gear and serves to interrupt or disconnect the trigger once your gearbox has made a complete cycle, very useful!

A Full Polymer constructed Mid-Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to inject more realism into their play-style.

They might look like a standard Airsoft M4 AEG magazine, but they've got a little secret, they launch themselves out of your gun when empty!  A spring powered latch projects the magazine out of your gun when the mag is empty to allow you to reload faster when the seconds really count.

A 27rnd spare or replacement gas magazine for G&G's latest line of GPM92 gas blowback pistols.

One of the latest pistols designed and built in-house by G&G this pistol does not disappoint. Carrying on the success from the GTP 9 this pistol contains all the latest advances in Airsoft pistol design, with a uniquely designed hop-up system and ceramic whirl valve designed to improve efficiency, reduce cool down, and enhance your Airsoft experience.

If you're looking for magazines for the fresh new sub gun on the block, the G&G MXC9? You have found them! The MXC9 medium capacity magazines are compatible with both the MXC9 and the G&G PCC.45 and are available in either 130-round or extended 170-round flavours. 

These magazines are spring loaded medium capacity magazines and will require a speed loader or loading rod to fill, via the fill/feed port at the top of the magazine body. Both magazine styles are constructed from rigid high density polymer and include a clear polymer witness window on either side so you can keep track of your round count and never be caught off guard! 

They've only gone and done it, the absolute lunatics! A drum magazine for G&G GTP9 and SMC9. Clearly G&G have been listening to the community and have brought us this 300 round wheel wound drum mag resulting in some insane firepower for your now portable LMG in pistol form factor!

Lee Enfield fans have had a great year...just like busses, you wait forever for a nice Lee Enfield replica and 3 arrive within the space of 6 months! The G&G LE4 MK1-P is G&G's Enfield offering, and differs from the others in its green gas power source, allowing more precise dimensional accuracy and heightened realism when compared to springers.

The G&G Lee Enfield is a truly innovative platform, feeding from 30rnd stripper clip style magazines (we like to call them "clipazines") with its gas tank inside the stock, making it far more skirmish capable than other gas bolt actions, and beating the springers with its smooth and fast bolt action with a realistically sized bolt. When your clipazine runs dry it pops up to allow for a quick reload, and the LE4 comes with 3 clipazines included. If you want the most realistic Enfield skirmish experience, this is the one to go for!

The G&G Armament G2 Tappet Plate For V2 AEG is a reinforced AEG Tappet Plate for use with version 2 gearboxes. It is specially formulated to be strong yet flexible enough to bend slightly. The plate is constructed from extremely lightweight polymer and is designed to be attached to the air nozzle and sector gear. This process controls the feeding of BBs from the magazine into the hop up chamber.

It is compatible with almost every Version 2 gearbox on the market and comes with only the tappet plate.

Built by G&G from the ground up this weapon is rather unique, based on a .308 styled AR receiver this weapon really stands out from the crowd with its' larger profile and magazines.

If you have worn out your AEGs trigger or you want the mil-spec look to replace your current trigger, this is perfect for you! The G&G Armament Trigger For V2 Gearbox is constructed from alloy with a textured finish and is patterned after the standard curved "Milspec" trigger found on the M4A1 rifle, MK18 MOD.0 and MOD.1, along with most other M4/AR-15 rifles used in military service in the real world.

The trigger is compatible with version 2 gearboxes which are found in the vast majority of M4/AR-15 AEGs. This means that the G&G Armament Trigger For V2 Gearbox trigger should work in practically any M4/AR-15 AEG but will require the gearbox to be opened for installation.

A 14mm CCW threaded muzzle device, designed to replace your Airsoft guns original flash hider with a sound amplifying compensator. This flash hider is an great to match an aggressive playstyle to a combat CQB primary.

An Airsoft SR25 6mm BB gun style magazine designed and built by G&G for use with their range of Airsoft Electric Gun SR25 replicas. It holds 50 rounds and is of steel construction.

An Airsoft 6mm BB Gun designed by G&G and based on the Honey Badger Style AR15 PDW Assault Rifle, featuring G&G's advanced quality internals and rock-solid alloy externals. 

This adapter attaches to the muzzle device of the MP9 GBB and provides a 14mm CCW male thread for attaching tracer units, suppressors, or alternative flash hiders.

G&Gs Hi-capa Killer! The Piranha SL features a split side design, with a stylish fluted barrel and a comfortable ergonomic frame with extended Picatinny rail. This pistol has a very fast cyclic rate, putting its rival, Hi-capa pistols, to shame! The Piranha SL also provides a long barrel for improved accuracy amongst a litany of other innovative G&G internal features.

If you're looking for an ultra-compact CQB primary and you're an AK kinda guy, the G&G Armament PRK9 RTS Nano Draco AEG belongs in your arsenal! This full metal beast is inspired by real steel AK Draco pistols, the PAK-9 Pistol and the PP-19 SMG, the result being absolutely unique! A squat, menacing AK-derived design, the PRK9 feeds from unique 9mm style magazines showcasing mock rounds through its clear polymer shell for maximum realism.

Inside, we're equipped with the proven G&G GT Advanced series internals, making the PRK9 11.1V LiPo-ready straight out of the box. The gearbox shell is alloy and well-machined throughout, the 18:1 steel gearset runs on 8mm ball bearing bushings and the whole setup is driven by the renowned G&G Irfit 25K Orange high-speed motor, resulting in a super-snappy trigger response and way above average rate of fire. G&G's programmable MOSFET/ETU system also features inside, ensuring your electrical components run at maximum efficiency and offering the option to run 3-round burst mode instead of full auto.

On the outside, this lil guy is very well equipped, rocking a 20mm Picatinny railed handguard, railed receiver top cover, 14mm CCW male threaded barrel and side folding AR buffer tube with the G&G GOS V4 sliding stock. If you've been tempted by an ARP9 thanks to its fantastic performance but prefer the AK look, the G&G Armament PRK9 RTS Nano Draco AEG will suit you perfectly!

Looking for spare mags for the G&G PCC45? You have found them! Featuring robust clear polymer construction keeping the weight down and dummy round inside for enhanced realism, this is basically the perfect airsoft mag! Who doesn't love the look on their puzzled friends' faces as they wonder how you got a real .45 ACP submachine gun?

The UMG models are great, but wouldn't it be great if we just had something a little more modern? Introducing the G&G PCC45, the 21st Century rendition of the very tired UMG style platform. 

This spare magazine for the G&G Armament Piranha gas blowback Airsoft pistol is constructed with a transparent polymer shell with mock 9x19mm cartridges visible within, and is a great way to make your pistol stand out on the field. It is filled with BBs using a speedloader, preferably with a GBB adapter, and can be filled with gas using the fill valve on the baseplate. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer and avoiding the long walk back to the safe zone to reload!

An Airsoft Electric Powered 6mm AEG BB Gun, producing a satisfying 320fps, incredibly light weight and reliable Airsoft RIF. An excellent beginner Airsoft weapon but also highly favoured by experienced Airsofters due to its out of the box performance.