FPS Softair

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable for version 2 gearbox variants of M4, M16, SR16, MP5, MC51, G3, M249 and LR300 and is compatible with ICS, Tokyo Marui, Classic Army, VFC and more. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

Upgrade your AEGs piston head to improve air seal and increase the efficiency of airflow through the cylinder. This piston from FPS Softair has ports on the front to push out the O-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

Constructed from CNC aluminium Ergal, which has been anodised, the piston head features a smooth precise surface. The piston head has ports on the front to push out the O-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.

The ball bearings help reduce tension created by the spring compressing and expanding, this combined with a ball bearing spring guide is the optimal set up to keep your spring in good shape.

This is the most advanced version with 8 ventilation holes for higher speed and rate of fire, double O-ring and ball-bearing. This head is designed for version 2 and 3 gearboxes but may fit other types.

If you're looking for a sturdy upgrade to your AEG, the FPS Softair Piston Head O-Ring Seal is a worthy contender. Constructed from high-density rubber for a superior seal to increase the reliable and lifespan of your rifle. This O-ring is likely to improve your air consistency, which may result in increased accuracy and is compatible with most piston heads.

Increasing the rate of fire on your airsoft rifle sometimes causes it to misfeed, resulting in dry firing. A sector gear delay will solve your feeding problems 99.9% of the time with a simple add-on.

This sector gear clip increases the time it takes for the air nozzle to cycle. Delaying the cycle improves BB feeding by allowing the air nozzle to be retracted from the hop-feed for a longer duration.

This tiny add-on could instantly transform your AEG if it has been suffering from firing issues.

Although this is designed to be a perfect fit, it is recommended that this be permanently fixed in place using superglue, after testing to prevent it from potentially loosening over time.

If you're working on a high-speed or high FPS gearbox, the FPS Softair Carbon Fibre Reinforced Tappet Plate for V3 Gearbox is essential. This hard-wearing tappet plate is constructed from carbon fibre-reinforced polymer, making it strong and flexible in equal measure. We've had superb results installing the Version 2 equivalent of this tappet plate in Bolster Armouries builds and if you seek similar performance we would wholeheartedly recommend this plate over others.

This Carbon Fibre Tappet Plate is compatible with any version 3 Airsoft gearbox, including those found in AUG, AR36, AK & S55x AEGs. Whether you're building a DMR or a beast of a high-speed setup, the FPS Softair Carbon Fibre Reinforced Tappet Plate for V3 Gearbox is the ideal upgrade to keep it feeding!

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable AK47, AK74, KURZ / PDW, SIG, GALIL or any version 3 gearbox AEG and is compatible with ICS, Tokyo Marui, Classic Army, VFC and more. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

If you're working on a gearbox build, FPS Softair 8mm Self Lubricating CNC Steel Bushings will give your build a long life of friction-free performance! Constructed from CNC machined steel, these 8mm solid bushings are compatible with any AEG gearbox which uses 8mm bushing/bearing holes. 

The advantage of solid bushings over ball-bearing bushings is their incredible strength, ideal for high-performance builds whether it's a DMR or DSG. If you're pushing the limits of Airsoft performance, FPS Softair 8mm Self Lubricating CNC Steel Bushings belong in your build!

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable for Tokyo Marui NGRS or version 9 gearbox. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

If you are planning to upgrade your Tokyo Marui NGRS system M4, this nozzle will be an asset to your build. The FPS Softair CNC ERGAL Air Seal Nozzle For TM NGRS M4/AR-15 is a vast improvement over the stock polymer air nozzle thanks to its highly robust CNC ERGAL (7075 aluminium alloy) construction and internal O-ring which should provide better air seal and a slight raise in FPS as a result.

The nozzle also comes with a pair of O-rings and has an anodised finish, providing a super smooth friction-free coating which will see your NGRS M4 working at peak efficiency.