- Full metal construction
- 6.03mm Tightbore inner barrel
- EAGLE™ Programmable MOSFET
If you're looking for a highly flexible, full metal M4/AR-15 platform, the Delta Armory DA-A19-EGL ALPHA™ TEMPEST 1 M4/AR-15 AEG should suit you perfectly! Kitted out with Delta's ALPHA line externals with the unique billet-style receiver and an SMR-style handguard up front, this M4 doesn't look like anything else out there, and the perks don't end there!
Inside, you'll find a 6.03mm tightbore measuring 380mm in length, a set of 18:1 ratio steel gears mounted on 8mm ball bearing bushings, an SHS piston with a full steel tooth rack and an SHS delayer chip and tappet plate to add reinforcement in the key places that need it.
The pre-installed EAGLE™ MOSFET allows you to program the trigger for semi-automatic only, burst mode, binary trigger, AUG mode and sniper delay. Coupled with its quick-change spring system, the TEMPEST 1 makes for a great DMR base gun thanks to its relatible easy conversion process. Whether you're looking for an all-rounder for both indoor and outdoor environments or you want to quickly switch between a DMR setup and standard AEG, the Delta Armory DA-A19-EGL ALPHA™ TEMPEST 1 M4/AR-15 AEG will be an asset to you!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
If you're looking for a mid-length M4/AR-15 platform kitted out with full metal externals and a programmable MOSFET for a remarkable price, your best bet is the DA-A19-EGL ALPHA™ TEMPEST 1 M4/AR-15 AEG from Delta Armory!
Being an AEG of the Delta Armory ALPHA™ line, the DA-A19-EGL TEMPEST 1 is considerably pre-upgraded straight out of the box, boasting a reinforced gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The new EAGLE™ ETU/MOSFET is the star of the show, offering unprecedented programming options using only the fire controls of the AEG itself. Options include 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking. Thanks to its quick change spring system, the DA-A19-EGL can be an assault rifle one day and a DMR the next!
Starting at the front end we can find a pre-installed birdcage flash hider at the tip of the 14.5-inch outer barrel. Both the barrel and flash hider are constructed from alloy, and the 14.5-inch outer contains an impressive 380mm 6.03mm inner barrel, making the TEMPEST 1 a fantastic starting point for a DMR build. The 14mm CCW threading also allows you to mount a tracer unit for a low-light instinct aiming advantage or a suppressor to add that sneaky styling!
Moving rearwards along the smooth profiled barrel, we come to the handguard of the TEMPEST 1 which is constructed from aluminium using CNC machining, guaranteeing in-spec attachment slots and rails and a flawless form. The handguard is equipped with a 20mm Picatinny rail along its entire upper surface, allowing for a wide range of 20mm Picatinny accessories to be added without hindering your ability to also mount a massive scope.
At the 3, 6, and 9 o'clock positions, we're equipped with SMR-style negative space attachment slots, mimicking the real "Super Modular Rail" handguard used on some of the latest, high-end real steel builds. Unfortunately, the slots on this handguard are not KeyMod or M-LOK compatible but the threaded holes are functional, meaning with a bit of work sourcing screws you should be able to mount a 20mm Picatinny rail if needed. The considerately designed profile of the SMR rail makes it quite comfortable to hold in its slick configuration, incredibly light and surprisingly ergonomic.
The receiver of Delta Armory's TEMPEST 1 is a modernised design, complete with machined-gripping texture on the front of the magazine well, ideal for shooting from unconventional positions along with angular surfaces across the receiver, giving the old '60s AR design a 21st-century facelift. The trigger guard is also enlarged and built into the receiver, improving strength considerably and following trends in the latest high-end real steel AR-15 rifles.
The fire selector is positioned just above the pistol grip and offers 3 modes of fire; SAFE, SEMI and AUTO, with a 90-degree throw between each mode. This makes the selector easy to switch, but not so easy that it can be knocked out of position accidentally. The magazine release is on the right side of the magazine well and is accessible for a right-handed user with the tip of the trigger finger.
Pulling back the charging handle, located at the top rear of the receiver will open the dust cover and retract the mock bolt carrier to allow access to the rotary HOP-up adjuster. This is the latest HOP-up unit design for the M4/AR-15 and provides finer increments of adjustment and holds its setting more effectively when compared to the older gear style HOP-up unit. The charging handle has an extended latch for easier access, allowing even those with thick gloves to access the HOP-up unit, though you may need to take off a glove to turn the adjuster!
The mock bolt catch is located in the centre of the left side of the receiver, and while this is a dummy control which doesn't provide a function it is nonetheless a separate part to maintain the realistic appearance and avoid the tell-tale signs of being a replica. The dummy forward assist is present on the right side of the upper receiver, right where it should be. This control does nothing on an AEG, and some real AR shooters argue it does nothing on the real thing, but it is included on the TEMPEST 1 to keep the rifle faithful to real M4/AR-15 rifles.
The pistol grip of the DA-A19-EGL boasts a refined grip angle for greater comfort when shooting with the stock fully collapsed and in more modern shooting stances. Each flank of the pistol grip includes fine crackle texturing, with additional linear texture on the front and back straps for perfect wet weather handling. The trigger is a "flat" trigger with a short finger ledge and textured front, making it ideal for pumping out rapid semi-automatic shots. The trigger guard is built into the receiver, improving strength and allowing gloved fingers easier access to the trigger than the standard AR flat trigger guard.
At the rear of the receiver, we come to the steel CQD style sling plate, which offers ambidextrous functionality with single-point slings; perfect for left or right-handed shooters. The steel construction of the sling plate practically guarantees no matter what you choose to mount to the plethora of 20mm rails on the DA-A19-EGL, the sling plate will be strong enough to support the weight. At the rear of the receiver, we come to the steel CQD style sling plate, which offers ambidextrous functionality with single-point slings; perfect for left or right-handed shooters.
To the rear of the sling plate, we come to the M4/AR-15 buffer tube, which is constructed from the same strong high density polymer used for the receiver. The buffer tube offers 6 positions of stock adjustment for the pre-installed Delta Armory battery stock, allowing you to set the stock at the perfect length to suit your body type and loadout.
The stock itself is a slimline design unique to the latest releases from Delta Armory. Featuring a QD sling socket on either side, a low-profile adjustment lever on the bottom together with conventional "footman loops", aka sling slots, the highlight of this stock is its rubber butt plate featuring lattice checkering and an angled section at the toe for providing grip in the most modern shooting stances, with or without body armour. If you have a preferred stock design, the stock can be swapped for alternative M4/AR-15 AEG stocks if you want to change up the looks!
The buffer tube also serves as the battery compartment for the DA-A19-EGL. To access the battery compartment, you will need to pull the stock adjustment lever (located on the bottom of the stock) out and hold it in place, after which you can slide the stock off the buffer tube, revealing a Deans/T-Plug battery connector inside. We recommend a 7.4V 1300mAh LiPo in stick configuration for the DA-A19-EGL though you may need to keep the stock extended to fit this battery inside. Delta Armory recommends a LiPo battery measuring 1.4 x 1.9 x 10 cm approximately for full functionality of the sliding stock.
As it comes, the TEMPEST 1 is fitted with plenty of pre-upgraded internal parts focusing on longevity and user-friendly maintenance, made all the sweeter by the advanced EAGLE™ MOSFET system. The version 2 gearbox shell is reinforced, allowing it to be upgraded for higher power springs if you want to take your build in a DMR direction. The spring guide is a quick change example, allowing for quick and easy power tuning without opening the gearbox shell and has ball bearings in its base to reduce the rotational force applied to the gearbox shell for a longer lifespan.
Inside the gearbox, we have a set of 18:1 ratio steel gears mounted on 8mm ball bearing bushings, an SHS piston with a full steel tooth rack and an SHS delayer chip and tappet plate to add reinforcement in the key places that need it. The ball-bearing bushings allow the gears to spin more freely with a reduced gearbox report and a much smoother sound.
The new EAGLE™ ETU/MOSFET system takes centre stage, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking. The ability to program this wide variety of modes using the trigger and selector of the gun itself gives the DA-A19-EGL the edge over practically any other platform in this price range. To provide the accuracy needed to get the job done at long range, the DA-A19-EGL ALPHA™ is rocking a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering higher FPS with the same spring and finer HOP-up adjustment increments.
For a mix of both indoor and outdoor skirmishes, the DA-A19-EGL TEMPEST 1 is ideally equipped. With a mid-length front end, tightbore inner barrel, quick change spring system and the extremely flexible EAGLE MOSFET on board, the TEMPEST 1 can be your CQB primary one weekend and transform into a DMR for the next!
Features
- Full metal construction - Realistically hefty
- 6.03mm Tightbore inner barrel - Great accuracy potential, 360mm length
- 14mm CCW Male threaded outer barrel - Tracer/suppressor ready, barrel extension may be required
- Flip-up iron sights pre-installed - Mounted to the top rail, press textured buttons to flip up
- CNC Alu SMR style handguard - SMR Negative space attachment at 3, 6 & 9 o'clock, 20mm rail up top
- 20mm Picatinny railed receiver - Ready for a red dot sight or rifle scope
- Unique receiver design - Angular surfaces, gripping texture on the front of the magazine well
- Enlarged trigger guard - Easy access for gloved or ungloved shooters
- Extended charging handle latch - Easy access to the HOP-up unit for adjustment
- Ambidextrous sling plate - Mount a single-point sling on either the left or right side
- Rotary adjustable HOP-up unit - Easy to adjust in fine increments, holds its setting well long-term
- 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type perfectly
- Delta Armory EAGLE stock - QD sling sockets on each side
- Ergonomic pistol grip with reduced grip angle - Great for modern shooting stances, very comfy
- Reinforced version 2 gearbox -
- SHS Piston with steel full tooth rack
- SHS Tappet plate
- Quick change spring guide
- Steel 18:1 gearset
- 7mm Bushings
- EAGLE™ Programmable MOSFET/ETU
- EAGLE™ MOSFET Functions:
- 3 or 5 Round burst mode
- Binary trigger
- Semi-automatic only
- Sniper delay
- AUG Mode
- Active braking
- Pre-cocking
- EAGLE™ Programming instructions available here
- Rear wired - Deans connector - Recommended battery: 7.4V 1300mAh LiPo in stick config.
- Compatible with M4/AR-15 AEG magazines - Plenty of spares available
Package Includes
- Delta Armory DA-A19-EGL ALPHA™ TEMPEST 1 M4/AR-15 AEG
- 120rnd Mid-cap magazine
Specification
General
|
Assault Rifle
|
---|---|
|
Yes
|
|
Yes,
No,
|
|
Approx. 310fps ± 10%, using 0.20g BB
|
|
Yes
|
|
Yes
|
|
Magazine
|
|
Starter, Regular Player,
|
|
Li-Po
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area
|
Weight and Dimension
|
Approx. 2.54kg
|
---|---|
|
80cm
|
|
88cm
|
Construction
|
Black
|
---|---|
|
CNC Aluminium handguard. Alloy outer barrel, flash hider, receiver & buffer tube. Steel sling plate & dust cover. High density polymer pistol grip & stock.
|
|
Polymer
Alloy
Aluminium
Steel
|
|
Polymer
Alloy
Aluminium
Steel
|
Weapon Specific
|
Electric
|
---|---|
|
None
|
|
Assault Rifle, M4 / AR-15 / M16, M4/AR-15 AEG, AR,
|
|
Long Gun Magazine, Assault Rifle, M4 / AR Platform,
|
|
Safe
Semi Automatic
Full Automatic
Programmable
|
|
Trigger Lock
|
|
Right Handed
|
|
Standard
|
|
1:1
|
|
0.25g
|
Hop-Up
|
Yes
|
---|---|
|
Rotary
|
|
Behind the mock bolt, accessible when the charging handle is pulled and held back.
|
Furniture
|
|
---|---|
|
20mm RIS / RAS , 20mm Railed Receiver, Proprietary Negative Space Attachment System, SMR Style attachment slots,
|
|
Sliding , Multi-Position ,
|
|
6 Position
|
|
Iron Sights , Aperture Iron Sight,
|
|
Buffer Plate , Stock , QD , Loop ,
|
Barrel
Outer Barrel Length (in)
|
14.5''
|
---|---|
|
Male
|
|
CCW (Counter Clockwise)
|
|
14mm
|
|
6.03mm
|
|
380mm
|
Magazine Specific
|
AEG, Medium Capacity ,
|
---|---|
|
Approx. 120 Rounds
|
|
Speed Loader
|
|
Top
|
Electric Gun Specific Information
Gearbox
|
V2 Gearbox
|
---|---|
|
Rear Wired
|
|
Yes
|
|
Yes
|
|
No
|
Motor
|
Standard
|
---|
Battery Specific
|
Deans
|
---|
Compatible Battery
|
Li-Po
|
---|---|
|
Stick
|
|
7.4v
|
Product Testing Data
|
310 FPS +/- 10%
|
---|---|
|
0.2g ASG Blaster BBs
|
|
26/06/2024
|
Size guide
Joule Charts
Special Instructions
These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.
FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.
Tap the tabs below to open the relevant chart for your replica.
This table should be used for reference, and cannot be used to check one weight against another, as the weight of the BB affects the power.
In order to check if the BB can be used with your replica chronograph using the weight you wish to use and then compare it against the table.
Every time you change weights you will need to re-chrono and check against the table. This is not a conversion chart between weights.
Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
325 | 0.98 | 1.23 | 1.37 | 1.47 | 1.57 | 1.77 | 1.96 | 2.11 | 2.21 | 2.45 |
328 | 1.00 | 1.25 | 1.40 | 1.50 | 1.60 | 1.80 | 2.00 | 2.15 | 2.25 | 2.50 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
335 | 1.04 | 1.30 | 1.46 | 1.56 | 1.67 | 1.88 | 2.09 | 2.24 | 2.35 | 2.61 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
345 | 1.11 | 1.38 | 1.55 | 1.66 | 1.77 | 1.99 | 2.21 | 2.38 | 2.49 | 2.76 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
355 | 1.17 | 1.46 | 1.64 | 1.76 | 1.87 | 2.11 | 2.34 | 2.52 | 2.63 | 2.93 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.
Velocity | BB Weight (Grams) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
FPS | 0.20 | 0.25 | 0.28 | 0.30 | 0.32 | 0.36 | 0.40 | 0.43 | 0.45 | 0.50 |
250 | 0.58 | 0.73 | 0.81 | 0.87 | 0.93 | 1.05 | 1.16 | 1.25 | 1.31 | 1.45 |
260 | 0.63 | 0.79 | 0.88 | 0.94 | 1.00 | 1.13 | 1.26 | 1.35 | 1.41 | 1.57 |
270 | 0.68 | 0.85 | 0.95 | 1.02 | 1.08 | 1.22 | 1.35 | 1.46 | 1.52 | 1.69 |
280 | 0.73 | 0.91 | 1.02 | 1.09 | 1.17 | 1.31 | 1.46 | 1.57 | 1.64 | 1.82 |
290 | 0.78 | 0.98 | 1.09 | 1.17 | 1.25 | 1.41 | 1.56 | 1.68 | 1.76 | 1.95 |
300 | 0.84 | 1.05 | 1.17 | 1.25 | 1.34 | 1.51 | 1.67 | 1.80 | 1.88 | 2.09 |
310 | 0.89 | 1.12 | 1.25 | 1.34 | 1.43 | 1.61 | 1.79 | 1.92 | 2.01 | 2.23 |
320 | 0.95 | 1.19 | 1.33 | 1.43 | 1.52 | 1.71 | 1.90 | 2.05 | 2.14 | 2.38 |
330 | 1.01 | 1.26 | 1.42 | 1.52 | 1.62 | 1.82 | 2.02 | 2.18 | 2.28 | 2.53 |
340 | 1.07 | 1.34 | 1.50 | 1.61 | 1.72 | 1.93 | 2.15 | 2.31 | 2.42 | 2.68 |
350 | 1.14 | 1.42 | 1.59 | 1.71 | 1.82 | 2.05 | 2.28 | 2.45 | 2.56 | 2.85 |
360 | 1.20 | 1.51 | 1.69 | 1.81 | 1.93 | 2.17 | 2.41 | 2.59 | 2.71 | 3.01 |
370 | 1.27 | 1.59 | 1.78 | 1.91 | 2.03 | 2.29 | 2.54 | 2.73 | 2.86 | 3.18 |
380 | 1.34 | 1.68 | 1.88 | 2.01 | 2.15 | 2.41 | 2.68 | 2.88 | 3.02 | 3.35 |
390 | 1.41 | 1.77 | 1.98 | 2.12 | 2.26 | 2.54 | 2.83 | 3.04 | 3.18 | 3.53 |
400 | 1.49 | 1.86 | 2.08 | 2.23 | 2.38 | 2.68 | 2.97 | 3.20 | 3.34 | 3.72 |
410 | 1.56 | 1.95 | 2.19 | 2.34 | 2.50 | 2.81 | 3.12 | 3.36 | 3.51 | 3.90 |
420 | 1.64 | 2.05 | 2.29 | 2.46 | 2.62 | 2.95 | 3.28 | 3.52 | 3.69 | 4.10 |
430 | 1.72 | 2.15 | 2.40 | 2.58 | 2.75 | 3.09 | 3.44 | 3.69 | 3.86 | 4.29 |
440 | 1.80 | 2.25 | 2.52 | 2.70 | 2.88 | 3.24 | 3.60 | 3.87 | 4.05 | 4.50 |
450 | 1.88 | 2.35 | 2.63 | 2.82 | 3.01 | 3.39 | 3.76 | 4.04 | 4.23 | 4.70 |
460 | 1.97 | 2.46 | 2.75 | 2.95 | 3.15 | 3.54 | 3.93 | 4.23 | 4.42 | 4.91 |
470 | 2.05 | 2.57 | 2.87 | 3.08 | 3.28 | 3.69 | 4.10 | 4.41 | 4.62 | 5.13 |
480 | 2.14 | 2.68 | 3.00 | 3.21 | 3.42 | 3.85 | 4.28 | 4.60 | 4.82 | 5.35 |
490 | 2.23 | 2.79 | 3.12 | 3.35 | 3.57 | 4.02 | 4.46 | 4.80 | 5.02 | 5.58 |
500 | 2.32 | 2.90 | 3.25 | 3.48 | 3.72 | 4.18 | 4.65 | 4.99 | 5.23 | 5.81 |
510 | 2.42 | 3.02 | 3.38 | 3.62 | 3.87 | 4.35 | 4.83 | 5.20 | 5.44 | 6.04 |