Airsoft Silencers, Suppressors & Tracer Units

An Alloy suppressor, designed to fit both Airsoft Sniper Rifles and Standard Airsoft AEG that uses a 14mm CCW outer barrel end.

If you want the stealthy aesthetic for your SMG or rifle, this is how you do it! The VORSK QD Suppressor with 5-Lug Flash Hider; 14mm CCW is compatible with the VORSK VMP series and now any Airsoft replica with a 14mm CCW male threaded barrel thanks to the inclusion of the super aggressive 5-lug flash hider. The suppressor mounts to the 5-lug muzzle device via a QD interface, meaning it can quickly be removed and reinstalled when needed.

Constructed from aluminium with a foam filling, this suppressor should dampen the muzzle report of your SMG or rifle slightly but its main role is to provide slick looks. There also is plenty of space inside to fit a custom foam filling or tracer module if you are happy with a bit of fabrication!

If you're working on a British Army KS-1/L403A1 build or you're into the latest real steel suppressor designs, the Angry Gun QDC/MCQ-PRT Suppressor with Shroud & Flash Hider belongs on your shopping list! This suppressor is constructed from CNC machined aluminium and is flawlessly finished, as we would expect from Angry Gun. The set includes the suppressor itself, the shroud (pre-installed) and the flash hider, making it ready to mount on any 14mm CCW male threaded outer barrel.

The suppressor mounts to the tri-prong flash hider via an innovative QD mechanism which requires you to index the pin on the flash hider with the corresponding groove inside the suppressor collar. With this done, turn the shroud counter-clockwise (with the front of the suppressor facing away) to tighten and lock the suppressor in place. The shroud can be removed from the suppressor but we don't recommend this as it can cause damage and ruin the QDC/MCQ-PRT's beautiful finish, which would be a real shame!

The build quality of this suppressor simply cannot be overhyped; if you put it down next to the real deal you'd be hard-pressed to tell them apart! If you're working on a KS-1 build or you want a squat, menacing suppressor in line with the latest real steel suppressor designs, the Angry Gun QDC/MCQ-PRT Suppressor with Shroud & Flash Hider belongs on your build!

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

Constructed from durable alloy and is foam filled to assist in suppressing muzzle sounds. 

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia. 

This Airsoft Suppressor is a replica of the PBS-1 which is designed for AK Platform rifles in the real world, but will work with anything that has either a 14mm CCW or 24mm CW Thread. This means it will fit to any replica with a standard thread, but can also directly thread to the Outer Barrel of AK models that have the appropriate thread (such as LCT branded AKs).

This Airsoft tracer unit is designed to fit onto threaded outer barrels of Airsoft guns to allow the use of illuminated Airsoft Tracer BBs. 

The ASG B&T tracer unit comes with a 14mm CCW thread that will attach to 90% of AEGs, and will attach to the remaining 10% with a thread adapter. The unit has an easy to operate on / off button switch and textured outer shell for easier fitment onto your Airsoft RIF.

Looking for a tiny suppressor that will fit inside your rail system (if it is over 32mm inner diameter)? The 100mm Dummy Silencer from Big Dragon provides a cost-effective solution! The inside of this suppressor is foam-filled, meaning you will experience some noise dampening of your gun's muzzle report! The suppressor has both CCW and CW threading, one thread on one end, one on the other - A thoughtful touch, ensuring compatibility as long as your threads are 14mm in diameter!

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

A 14mm CCW compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, teammate locations, run infection themed skirmishes and generally lighting up the dark with bioluminescence.

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a US Airforce Supplied Suppressor.

If you want to turn your local CQB site into a nightclub while you send rainbows of death at the enemy team the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns is what you need! This device can be used as a standard tracer unit, a tracer with a muzzle flash effect with 7 different colours to choose from, and of course, in the rainbow flash mode which lights up the first meter or so of the BB's trajectory with a dazzling rainbow effect. Just wait until you see this thing in action, it is positively EPIC!

This is the latest generation of the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns, meaning it works a little differently than the original model. The activation button is now on the front, and the tracer collar includes relief cuts to allow for shotguns with full-length magazine tubes and iron sights mounted directly to the barrel.

This device is intended for use with tri-shot Airsoft shotguns but comes with a 14mm CCW thread adapter and an adapter for 16mm unthreaded barrels. The default mounting mechanism is compatible with unthreaded shotgun/sniper rifle outer barrels of between 19mm and 24mm outer diameter, giving you an unprecedented amount of flexibility all in a single unit. If you want the enemy team to taste the rainbow, the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns is what you need!

If you want that "I just triple tapped Bin Laden in the face" look, you probably already have an MP7, but you will be needing the suppressor to match. Introducing the H&K licensed suppressor for the MP7 by Umarex, a Quick detach suppressor with a foam filling for added suppression effect.

A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a Special Forces SOPMOD Supplied Suppressor. 

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.

A NYLON Constructed Moderator / Suppressor cover, ideal for those who want to keep their muzzle hidden & protected.