Big Dragon

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

If you're interested in going sneaky on the cheap, the Big Dragon 135x34mm Dummy Suppressor; 14mm CCW & CW should suit your needs. This aluminium dummy suppressor is equipped with 14mm CCW threading at one end and 14mm CW threading at the other, meaning it can be used on both common CCW barrels and awkward CW barrels. 

Featuring a foam internal filling stabilised with a steel spring, the Dummy Suppressor should slightly muffle the muzzle report of your AEG or GBB, though its main purpose is to provide sneaky looks. Weighing in at 117 grams approximately, this suppressor is ideal for AEG and GBB rifles but can still be used on GBB pistols, potentially with a slight reduction in gas efficiency. 

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

A Cotton constructed Concealment Veil for Airsoft Snipers, which is placed over the head to add shadows, texture and depth to your visible profile, and to keep you hidden from enemy sight.

A fully adjustable mesh lower face mask with a hard armour foam layer which not only makes this mask look amazing, but reduces the likelihood of shattered rounds making their way through the mesh.

A steel-constructed sling plate designed to fit on Airsoft M4/15/16 AEG (Electric) Receiver.

An ventilated, alloy constructed replacement base plate for a standard M4 AEG motor base plates in pistol grips. 

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

A four pack of Keymod compatible Rail covers, designed to give the user a firmer grip on their Rifle during use. The rail panels are constructed from Rubber and are 15cm in length. 

A replica of the legendary PBS-4 Suppressor, lovingly recreated using Aluminium and with a 14mm CCW Thread, so that it can attach to more than just an AK! This Suppressor is designed for 5.45x39mm AKs (in the real world), but is an unusual design that can add a cool touch to any replica. If your Airsoft Gun has a 14mm CCW Thread, this Suppressor will fit and work, and is the ideal way to make your Gun stand out from the crowd.

A rubberised vertical foregrip for Airsoft replicas with a 20mm rail, offering stability and a comfortable platform to brace your rifle.

If you need sling swivels, these might work! The Big Dragon Harris-style Sling/Bipod Lugs with Swivels include a pair of Harris-style sling/bipod lugs with self-tapping screw tips and a pair of sling swivels for Harris lugs. The included lugs are ideally used in real wood stocks and will require holes to be drilled for installation. Remember, measure twice and cut once!

The swivels themselves are compatible with pre-installed Harris lugs found on VSR-10, L96, M24 and M40 sniper rifles. If you have one of these rifles with harris lugs pre-installed, simply attach the swivels using the included pins and stash the included lugs away for a future project! Whether you want swivels for your existing lugs or you need harris-style lugs for your real wood-stocked Air Rifle or Airsoft gun, this set is ideal!

A suppressor designed to fit onto Airsoft 6mm BB Gun in order to dampen the sound leaving the barrel.

A classic front sight design that has been around for quite some time in the Airsoft world, this sight is usually found on KAC style replicas such as the KAC PDW, SR-25, and SR-15, but is perfectly suitable for a civilian tactical M4 build or an MK12 SPR build. The sight mounts to a 20mm Picatinny rail and is adjustable for elevation by raising and lowering the steel front blade/post using an M4/AR15 front sight adjustment tool. This sight is very sturdy and well built, making it perfect for anyone who has had bad luck with polymer sights. The sight was intended to be equally effective in use as a primary aiming device as it is as a backup sight for your optic. This sight is incredibly low profile when folded, and is perfect for setups with a big scope that would prevent bulkier flip-up sights from mounting. 

A Tail Switch unit designed to replace the existing Push button on the back of Big Dragon SF G2 Style T6 Torches. The tail switch is constructed from polymer with a Soft Rubber coated tail switch. 

If you're looking for a compact red dot sight, but want something that looks a bit different to the norm, the Miniature Rifle reflex sight from Big Dragon could be what you need! The Miniature Rifle Reflex sports a crisp, fine 2 MOA dot with 6 levels of brightness adjustment for aiming, and comes with both a low and high mount for 20mm Picatinny rails. 

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

This Airsoft suppressor is designed to be fit onto 14mm Counter Clockwise (CCW) threads, and is foam filled to reduce the audible output of the weapon. The suppressor is constructed from Alloy, and features a spring core and foam filling, and is finished with US Navy Seal Branding. 

If you are looking for some face protection but can't abide by mesh masks with their straps, the Shadow Fighter Mesh Mask was designed with you in mind! Providing a sweat-wicking breathable balaclava style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava style design helps take the sting out of those back of the neck and ear hits too!

If you are looking for some face protection but can't abide by mesh masks with their straps, the Shadow Fighter Mesh Mask was designed with you in mind! Providing a sweat-wicking breathable balaclava style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava style design helps take the sting out of those back of the neck and ear hits too!

A transparent Polymer lens protector designed for EOTech Style Sights, protecting your Sight from BB's and other projectiles designed as a first defence, protecting your lens.

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.

Built from lightweight polymer, these rail panels are designed to cover 20mm RIS / RAS rails and offer a more comfortable grip on your RIF.