All Spring Internals

If your Lee Enfield is out of action, hopefully, this will cure it! The S&T Loading Ramp for SMLE NO.1 MK.III S.M.L.E Bolt Action is constructed from high density polymer with steel screws and is a replacement original part for the S&T S.M.L.E spring bolt action rifle. This is the part that transports the BBs from the magazine into the HOP-up chamber, known as the "Loading Ramp", and is a common part which gets worn down over time. Whether your Enfield needs fixing or not, this is a great part to have in the tool box!

If you want to push your VSR-10-based sniper rifle to the absolute pinnacle of accuracy, a TDC mod should do the trick! The Hades Airsoft TDC HOP-up Unit Set for VSR-10 Sniper Rifle is designed to replace the original HOP-up arm and adjuster, providing direct pressure to the top of the HOP-up nub and bucking to eliminate side-to-side shot deviation.

Installing this TDC unit will require some extensive, irreversible modifications to your base sniper rifle, so we only recommend this set for those who are confident with power tools and have a decent level of Airsoft technical knowledge.

The unit requires you to drill a hole through the top of your outer barrel using either a 5mm or 5.5mm drill bit and the included drill guide, inserting the guide into the stripped outer barrel to ensure the hole is drilled in the right place. Hades also recommends that when the modification is complete, that you glue the TDC unit to your outer barrel using super glue or another strong adhesive.

If you are the type of sniper that likes to get their hands dirty with modifications and you want your VSR to outrange and outshoot the rest, this kit will do it!

A CNC machined Aluminium Hop Arm / Pressure Plate for the Modify MOD24 Bolt Action Sniper Rifle.

The Stainless Steel Cylinder for CM.706 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.706 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

The Novritsch SSG10 Spring Guide is the perfect spare part for your SSG10 sniper rifle. It is compatible with all versions of this platform (A1, A2, A3). Its one-piece machined steel construction means that you will never have to worry about this spring guide breaking or unscrewing. The spring guide has the 13mm diameter spring standard, which means your SSG10 will have the maximum spring return efficiency, perfect for hitting those shots consistently!

Whether your SSG10 is out of action and in need of repair, or you fancy a spare part for peace of mind, the Novritsch SSG10 Spring Guide is the perfect piece to pick up for you sneaky snipers!

An Alloy constructed Trigger Set for the WELL MB Series of Spring-Powered Sniper Rifles, which is designed as a drop-in unit to replace a damaged Trigger. The part is very easy to install and is a great way to bring your MB-01/MB-08 back to life with minimal fuss, should it be suffering from a Trigger fault.

If you're experiencing feeding issues with your S&T Lee Enfield No.1 MK.III, this should cure it! The Loading Plate for S&T Lee Enfield No.1 MK.III Rifles is an original replacement part, constructed from high density polymer. The set includes the loading plate itself and its C-clip retainer and is confirmed to be compatible with the S&T Lee Enfield No.1 MK.III but compatibility with S&T's No.4 MK.I rifle is yet to be confirmed. 

Whether you've been unlucky and broken your loading plate or want to get ahead of a potential future failure, the S&T Loading Plate for S&T Lee Enfield No.1 MK.III Rifles is ideal!

A highquality replacement Hop-Up unit designed and created by Action Army to fit TM Spec VSR / BAR-10 Airsoft Bolt Action Sniper Rifles, to enhance and perfect the performance of the weapon.

The Air Brake Pin blocks the cylinder head before impact producing an air "cushion" for the piston. As a result, the impact is dampened and the gun is more quiet. Included are 4 different lengths: 20 mm, 23 mm, 26 mm and 29 mm. The longer the length, the more of an air cushion resulting in a quieter shot, but it also reduces the FPS due to more of the air in the piston being used to dampen the impact. AirBrake pins are installed onto the piston head to make shooting the SSG-10 rifles quieter. They are compatible with upgrade parts such as the Novritsch SSG10 Weight Adjustable Piston. 

This is an advanced technical part, it is only recommended if you are confident in your upgrading abilities. 

If you've misplaced a screw from your SSG10 A3, the Novritsch SSG10 A3 Stock Screw Set is what you need! This set includes all of the stock screws for the SSG10 A3, constructed from steel and finished in black, just like the original screws. This screw set is only for the SSG10 A3 but may also be useful for those running the Maple Leaf MLC-S2 chassis on a VSR10 platform. 

If your S&T Lee Enfield No.1 MK III has trigger issues, this will sort it out! The S&T SMLE No.1 MK III Trigger Group is a replacement original parts set including a complete, pre-built trigger group. This means installation is relatively easy, saving you the hassle of putting the trigger group together yourself. Compatibility-wise, this trigger group is only for the S&T Lee Enfield SMLE No.1 MK III rifle and won't fit the Ares No.4 MK.1 or MK.1*. 

A 50 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

Can be fitted inside other rifles including AEG gearboxes. The sorbo pad works by absorbing impact from your piston head, please note you should expect an FPS loss so you may have to improve the air seal or fit a slightly larger spring to regain your desired FPS.

If you're planning to upgrade your CYMA CM.700 or CM.708 sniper rifle, install this first! The CYMA Stainless Steel Cylinder for CM.700/708 Sniper Rifle is pre-assembled with a brass cylinder head, rubber O-ring and stainless steel cylinder with a welded bolt handle mount for maximum strength. The inner surface has been polished to reduce friction, improve efficiency and prevent excessive wear and tear when using strong springs.

Compatibility-wise, this part set is only for the CYMA CM.700 and CM.708 series of spring-powered sniper rifles and is unlikely to work with other brands and models. As always, we only recommend upgrade parts like this for those with experience or the patience and willingness to learn. If you plan to install a super strong spring into your CM.700 or CM.708, this set should give it the strength it needs to last a lifetime!

If your loading plate locker is damaged, you're in luck! The Airsoft Pro Loading Plate Locker works with the Well MB and TM AWP Sniper Rifles. A loading plate locker is a retaining ring that holds the loading plate whilst it is mounted on the cylinder head. It is made from high-density polymer, making it a great replacement/spare part.

Only try and fit this Loading Plate Locker if you're confident in your abilities and you know what you're doing, it could be difficult!

This is a replacement HOP-up rubber for the Novrtisch ''Full thrust'' SSG10 Sniper rifle and is only compatible with this platform due to the increased size of the HOP-up chamber and inner barrel. It is the perfect replacement piece to increase the lifespan of your Full Thrust SSG10 and have it shoot like a laser on the battlefield. 

If you're noticing a dip in your SSG10 Full Thrust Sniper Rifle and you want a quick fix that is affordable, the Novritsch SSG10 Full Thrust Bucking is here for you!

A 70 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

Do you want to push your Novritsch SSG10 to the next level? The Novritsch SSG10 Cylinder Head Gen2 will help you achieve this dream. This machined stainless steel cylinder head has been optimised to make it more consistent and powerful. The thread has an optimal length to maximise the cylinder volume and the shape of the cylinder head has been slightly tweaked for a better air seal. 

The Novritsch SSG10 Drill Fluted Cylinder is a fantastic upgrade for your SSG10 sniper rifle. This gives your Novritsch sniper a wonderfully unique look, and additionally, it also reduces the contact surface when pulling the bolt, which results in a smoother and easier pull. It's the perfect balance of aesthetic and functionality improvement!

You will need to disassemble your SSG10 rifle and then reassemble it to install this part. This sounds tricky and intricate, but luckily for us, Novritsch has kindly provided a video showing you how to disassemble your SSG10, install the Drill Fluted Cylinder, and then reassemble the SSG10. Installation video attached. We only recommend upgrade parts like this for those with experience or the patience and willingness to learn.

If you need a bit more range from your Novritsch SSG series sniper rifle, this spring will do it! The SSG 13mm Main Spring is compatible with any Novritsch sniper rifle with SSG in the name, along with the TAC338 platform. 

As impressive as the range of Novritsch sniper rifles already is, this spring should give you an FPS increase so you can engage targets at longer distances, though it will make your rifle more difficult to cock. If you're the type of sniper who prioritises effective range over mobility and speed, the SSG 13mm Main Spring will give you the range you need!

A high quality replacement Hop up rubber, made to 50 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

If you're planning on doing up your WELL MB02/03 VSR-10 clone, this set will sort your piston group! The WELL Piston Upgrade Set for MB02/03 Sniper Rifle Series includes a CNC aluminium piston and piston head, CNC aluminium ball bearing spring guide and a 500FPS mainspring. Installing this set should get you right to the upper limits of permitted sniper rifle velocity, extending range considerably compared to the stock MB02/03 spring. If you're working on a bargain sniper rifle build with a WELL VSR-10 clone base gun, this set would be perfect!