Airsoft Magazines

If you need a spare mag or two for your Double Eagle M401 shotgun, here you go! These magazines hold 18 BBs and are constructed from polymer, making them affordable and lightweight. Each mag is filled similarly to an AEG mid-cap or low-cap, through the fill/feed port at the top front of the mag body and a speedloader is recommended to make loading easier.

As with the original M401 mag, these mags have built-in magazine catch buttons on either side, making for quick and easy reloads thanks to the prominent buttons. Whether you run the M401 as a skirmish backup or just for some backyard fun, a spare mag is very handy to have to spend more time shooting and less time loading!

If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 190rnd Hi-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.

This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a wheel wound high-cap and is loaded using the top fill window and reloaded by winding the bottom wheel.

Whether you are gearing up for a WW2 re-enactment or just like some extra rounds for your classic 2 centuries old rifle S&T have got some spare mags for your trusty Nagant. Constructed from lightweight polymer, the mag holds 35 rounds, filled at the front of the mag with a speed loader.

BBs are held in place using a spring that coils round into itself to ensure the maximum amount of round storage in the small area.

If you run your Hi-Capa as a primary and find yourself short on ammo, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 GBB Pistols will keep you shooting for longer! This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones. This is the chrome silver version, ideal for the stylish skirmisher. If you need the black version, check it out here!

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Magazine for R501/R603/R604 GBB Pistols will be a useful addition to your kitlist!

If you need magazines for your A&K Dragunov SVD these should fit the bill! The NUPROL 110rnd High-Cap magazine for A&K SVD is designed to work in the A&K Dragunov SVD AEG series but will not work in the CYMA or Real Sword SVDs. The magazine fits the classic SVD aesthetic thanks to its stamped steel shell complete with reinforcing ribs.

The magazine can be filled via the fill window at the top rear of the magazine and the winding wheel is located on the baseplate and needs to be wound in order to tension the magazine. 

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

An excellent addition for Airsofters with a 1911 as their sidearm, this is a 25 round capacity gas blowback magazine designed for the Army Armaments 1911, but is also compatible with many other designs. 

If you're looking for magazines for the fresh new sub gun on the block, the G&G MXC9? You have found them! The MXC9 medium capacity magazines are compatible with both the MXC9 and the G&G PCC.45 and are available in either 130-round or extended 170-round flavours.

These magazines are spring loaded medium capacity magazines and will require a speed loader or loading rod to fill, via the fill/feed port at the top of the magazine body. Both magazine styles are constructed from rigid high density polymer and include a clear polymer witness window on either side so you can keep track of your round count and never be caught off guard!

If you're looking for magazines for the fresh new sub gun on the block, the G&G MXC9? You have found them! The MXC9 medium capacity magazines are compatible with both the MXC9 and the G&G PCC.45 and are available in either 130-round or extended 170-round flavours.

These magazines are spring loaded medium capacity magazines and will require a speed loader or loading rod to fill, via the fill/feed port at the top of the magazine body. Both magazine styles are constructed from rigid high density polymer and include a clear polymer witness window on either side so you can keep track of your round count and never be caught off guard!

So, if you have got yourself the Short Magazine Lee Enfield rifle from S&T, you will probably need a few more short magazines to go with it, eh? Introducing the Lee Enfield Rifle No.1 Mk.III S.M.L.E magazine from S&T, an alloy 35 round magazine with a beautiful old-school antique still finish on the outside. This magazine is a spring-loaded design and can be filled either with a speed loader or by hand from the fill port at the front. This magazine is around the length of a 7.62 STANAG magazine and could be carried in 7.62 fabric magazine pouches with a spacer in the bottom for easy access.

A 22 round Green Gas / Inlet Valve Magazine for the UMAREX Glock 45 Gas Blowback Pistol, featuring a top of the range build quality & official Glock trades. 

A High Capacity Gas Magazine for WE B92 Airsoft Gas Blowback Pistols. 

An 18-round CO2 Powered Gas Magazine for the UMAREX Glock 17 Gen.4 CO2 Gas Blowback Pistol, featuring a top of the range build quality & official Glock trades. Please note, this magazine is specifically for the Umarex Glock 17 Gen.4 Co2 GBB with the manufacturer part number 2.6434 and is unlikely to work with other Umarex Glocks. 

If you are running the Well Minigun you will probably want a couple of these on hand to keep up with its intense rate of fire! The Well 1200rnd Magazine for WE23-S Mingun holds 1200 BBs and winds itself via the internal motor of the Well Minigun, meaning no need to do anything but pull the trigger!

The magazine indexes at the rear and rocks in to lock at the front, similarly to an AK or FAL platform but backwards, and the magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag,  reinstall the rear plate and you are ready to shoot!

An 8 round magazine for the SRC 7.65 pistol.

A Green Gas powered Spare Magazine for the ASG STI Combat Master Pistol. If you own one of these Sidearms, chances are you're a fan of the film. If you're a fan of the film, chances are you're going to want to fling Magazines all over the place. Stock up on Spare Mags today to give you the best chance of avenging your pupper, and so you can spend more time playing, and less time back in the safe zone reloading.

If you're running the epic Golden Eagle M1887 shell-ejecting lever action shotgun, you'll need some of these! The Golden Eagle Shotgun Shells for Golden Eagle/S&T M1887; Pack of 5 is designed for the Golden Eagle M1887 shotgun series but also works in the S&T M1887 series. These shells are supplied as a pack of 5, constructed from polymer with a metal rim coloured to match the brass base of most 12 gauge shotgun cartridges.

Like the original shells, these shells hold 1-3 BBs and can be loaded through the front of each shell, either with a speed loader or by hand. 

Have you ever owned a 1911 Pistol and been underwhelmed with the performance in cold weather? The size of a 1911 Magazine makes them rather inefficient, however this Extended 36rnd CO2 Magazine for RAVEN 1911s fixes the problem by using CO2, which is much better in cold weather and yields a far, stronger recoil, meaning gassing out is a thing of the past!

A magazine designed for use in the WE Europe's GALAXY Series of pistols. Each magazine is of a full metal construction and holds up to 25 rounds.

If your 1911 Pistol had an underwhelming performance in the cold weather, you need a CO2 magazine and the performance will be much better! CO2 is much better in cold weather and yields a far, stronger recoil, meaning gassing out is a thing of the past! Also remember that CO2 does not contain any lubricant of its' own, and so you will need to lubricate your Pistol regularly using a Silicon Lubricant, such as: Abbey Silicone Gun Oil 35 Spray.

Just remember that the laws of physics still apply, and if you try to dump an entire Magazine quickly, you could cause damage to the Nozzle of your Pistol. Please ensure that all CO2 has been used in the Magazine before attempting to remove the Bulb, as it could still be under pressure. Excess CO2 is best used by firing the Pistol, rather than pressing the knocker valve on the back of the Magazine.

Keep your 1911 performing well no matter the weather with the WE 15rnd CO2 Magazine for 1911 GBB Pistols, come rain or snow your 1911 will still be able to complete the mission.

If you have an AK, but you ain't no Russian, this is the magazine you will probably want. The Modern Mid-cap Magazine from CYMA is compatible with most Airsoft AK47/74 series AEGs and is patterned after modern AK rifle magazines sold on the US civilian market. This magazine is straight in profile, making it realistic for AK rifles in 5.56mm and 5.45mm Russian, and its waffle style external ribs provide the modern look and superb gripping qualities, ensuring you have a firm grip on your magazine during a fast reload. The magazine is constructed from polymer with a steel feed spring, and can be loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod.

An Airsoft 6mm BB gas blowback magazine for the 5.1 Hi-Capa pistol series, with a double stacked design it has a capacity of up to 25 bb rounds. 

A Gas blowback magazine designed as a replacement or spare for the KC-02 Special Teams Carbine licensed by ASG. With a an ammunition capacity of up to 29 rounds. 

If you need to load up on MPX magazines you have found what you need! This 100rnd Mid Cap Magazine is designed for the SigAir/VFC MPX AEG and is a rattle free mid-cap design which holds 100 6mm BBs. The fill/feed port is located at the top of the magazine and it can be loaded using a standard Airsoft speed loader or loading tool.

This magazine design perfectly mimics that of the real thing, including its clear polymer body and detailed mock 9x19mm cartridges visible through the body. The sides, front and rear boast moulded in gripping texture to avoid potentially dropping or throwing the magazine during a reload in wet weather and these can do double duty as a makeshift grip for shooting in unconventional positions. On the left side of the magazine we are also treated to licenced trademarks, with "SIG SAUER 9x19" proudly displayed in recessed lettering. If one could call a magazine beautiful, it would be this one!

This 54rnd magazine is designed for AR36 platform Airsoft Electric Guns, and comes included with a set of Bullet Stickers to install behind the semi-transparent plastic, to make your replica look as realistic as possible. Not only this, but multiple magazines can be clamped together for lightning-fast reloads and easier magazine management. A Speedloader is required to fill; the magazine will feed until empty, without any annoying rattle sound.

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and holds an impressive 36 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and holds an impressive 36 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included allen key, through the baseplate.

If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A 530 round high capacity, wheel-wound magazine, designed for use with G&G's UMG SMG electric replica. Constructed from durable, high strength and lightweight polymers.