All External Airsoft Parts & Attachments

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

Do you want to make your Delta Armory VZ.58 or equivalent look just like the real service rifle? Or maybe you fancy giving your M4 a more classic look, if so, the Ares VZ.58 Flash Hider; 14mm CW is for you! This flash hider is styled after the real steel VZ.58 muzzle device manufactured by the real steel brand Czech Small Arms.

Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake it will give your Airsoft rifle a unique look and add to the realism of the overall platform.

Its alloy construction and black finish are sure to withstand most bumps and scrapes on the battlefield, making it the perfect way to keep your outer barrel and precious inner barrel safe from damage. Style your AEG after an iconic service rifle and remember, VZ.58s are NOT the same as AKs!

If you are looking for the icing on the cake of your latest build, a unique flash hider may well be the thing that makes it stand out from the crowd! The Barrett REC 7 style flash hider from KRYTAC is a faithful replica of the real Barrett REC 7 flash hider, even down to the Barrett "B in a box" logo which is engraved into the upper surface. The flash hider features two ports on either side, and can be installed by first loosening the grub screw, threading the unit onto your 14mm CCW male threaded outer barrel, and tightening the grub screw back down when the flash hider is in the correct orientation.

If you have plans to build out a Krytac Maxim 9 as a primary pistol you will want this! The Krytac SilencerCo Maxim 9 GBB Pistol 20mm Picatinny Rail Kit provides a single 20mm rail which can be mounted to the KeyMod slots on the bottom of the Maxim 9 suppressor, and is the perfect length to look just right.

20mm Picatinny rails allow you to mount a laser aiming module or a tactical flashlight to your silent killer and assist your efforts in cleaning up the CQB site. For those who see the potential in the Maxim 9 to be the ultimate CQB tool, this rail kit will be an asset! 

If you're looking for a unique muzzle device to top off your build, check this out! The ASG Flash Hider for EVO Carbine; 14mm CCW is constructed from aluminium and has a unique, slanted design with aggressive ports on each side. 

While it is designed for the ASG CZ Scorpion EVO 3 A1 it can be mounted on anything with a 14mm CCW male threaded barrel, so go wild!

A replacement mock Compensator / Flash Hider for Airsoft 6mm BB Guns, fully licensed by PTS Syndicate, and is a replica based on the Griffin Armament design. 

This adapter attaches to the muzzle device of the MP9 GBB and provides a 14mm CCW male thread for attaching tracer units, suppressors, or alternative flash hiders.

This is a set of Pistol Grips for the VORSK Agency VX-9, available in either Dark or Light coloured Real Wood. They have Rubber Inlays to match the original set, providing grip and comfort from the material and ergonomic shape. They're incredibly easy to install, requiring only four screws to fit.

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position. 

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings. 

In an intense Airsoft skirmish the adrenaline is flowing, and often with that comes the loss of fine motor skills. If you have ever fumbled a reload at a critical time, you will know what we are talking about! The Aluminium Magwell Type 3 from Airsoft Masterpiece is intended to solve this issue by providing a helpful flared guide to assist you in getting that magazine into the gun quickly and with ease. The wide flare of this magazine well makes it perfect for speed reloads, either in a skirmish or an IPSC competition, and can be particularly useful under pressure!..

In an intense Airsoft skirmish the adrenaline is flowing, and often with that comes the loss of fine motor skills. If you have ever fumbled a reload at a critical time, you will know what we are talking about! The Aluminium Magwell Type 3 from Airsoft Masterpiece is intended to solve this issue by providing a helpful flared guide to assist you in getting that magazine into the gun quickly and with ease. The wide flare of this magazine well makes it perfect for speed reloads, either in a skirmish or an IPSC competition, and can be particularly useful under pressure!..

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

If you own an Eshooter FLARE M Tracer Unit, M BT or Mono but want to keep your platform's front end looking realistic, this is the suppressor for you! The Eshooter Sound Suppressor/Tracer Housing for Flare M is an alloy suppressor-styled muzzle device. It mounts straight onto a common 14mm CCW and includes an 11mm CW to 14mm CCW thread adapter, so if you have something like a WE and Armourer Works pistols OEM pistol you don't have to source one separately!

To fit your tracer unit in this suppressor, simply untwist either side of the muzzle device, drop your FLARE M in and resecure the part you untwisted. This suppressor will not only keep your tracer unit safe from accidental bumps and scrapes on the battlefield, but it will also conceal the unrealistic style of the tracer unit.

Both styles feature unique, modern styling, and a grippy section of textured alloy so you can have a good grip on the suppressor when securing it to the front of your barrel. If you're looking for a way to keep your tracer unit lowkey on the battlefield, or you want a modern low-profile suppressor device, the Eshooter Sound Suppressor/Tracer Housing for Flare M is perfect for you!

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

If you have dreams of kitting out your NGRS AK with the slickest modern stock attachment interface out there your dreams can now become reality! The 1913/20mm Picatinny Stock Adapter from Laylax is designed for the TM NGRS AK, specifically the side folding stock variants (AKS-74U, AKS-74N and AK-102) and replaces the original skeleton side folder with a short length of 1913/20mm Picatinny rail to allow 1913/20mm Picatinny stocks to be mounted and swapped out for alternatives in seconds. 

The adapter is constructed from aluminium and also has a QD sling socket on the left side, in the ideal position to run a single-point QD sling setup. If you want a more modern look for your AK this adapter gives you access to MPX and MCX stocks in a plethora of shapes and sizes and also the good old M4/AR-15 buffer tube if you are after something a bit more conventional. 

Made from 6061 Aluminium with a matt black anodised finish, this ALPHA KeyMod handguard for AK47/AK74/AKM provides all the latest advantages to this venerable platform. With the real version of the ALPHA being in service with the Russian military, you can dress your AK like Spetsnaz with no gains in weight, owed to this handguards lightweight design. With 5 surfaces to mount your accessories, you can mod more keys onto this than your typical AR15 handguard!

Compatible with INOKASU, GHK, LCT and Tokyo Marui replicas.

Looking for fast access to the selector switch on your AAP-01? So are we! Thankfully, TTi, being the innovators they are have invented the perfect solution! The Competition Charging Handle with selector switch combines an extended charging handle with an extended rotary selector switch which allows you to change fire modes in a flash without needing to lock the bolt open and break fingernails. This is the aftermarket part the AAP always needed!

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

The SR Q Furniture Set is a complete Grip/Stock set for AK Platform GBBs (Gas Blowback Guns), and will provide a gorgeous and futuristic all-in-one Pistol Grip and Stock, as well as a comfortable Foregrip to give your AK a sci-fi update! This kit is very easy to install, needing only your Stock and Pistol Grip to be removed, and is the perfect way to give your Airsoft Gun a modern update.

For the AK guys who want to join the rest of us in the 21st century, CYMA has come through! The Modular KeyMod Railed Handguard is constructed from aluminium and includes a smattering of KeyMod 20mm Picatinny rail sections pre-installed, which can be moved around and placed wherever you like. This handguard is particularly interesting as it can be set up in several different configurations, either with or without the included handguard extension section and with the choice of leaving the upper handguard sections on or removing them to lower the weight. 

A 20mm mounted Russian tactical flashlight with an included pressure pad, designed to blind your enemies and provide you with the ultimate tactical illumination device to see you through your skirmish.

If you want to optimise your MCX for CQB, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will get you there. This set includes a 7-inch outer barrel and a detailed replica of the real steel Spear LT SBR handguard, both CNC machined from aluminium with the precision we expect from Airsoft Artisan. 

The Spear LT SBR handguard features M-LOK slots at the 3, 6 and 9 o'clock positions with additional slots at the lower offset angles and a single extra slot on each side, just ahead of the gas block cutout. This matches the handguard of the latest MCX SBR variant, keeping your MCX at the cutting edge of modern platforms. If your MCX needs to lose a few inches and gain a few M-LOK slots, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will sort it out!

If your M4/AR-15 AEG needs a high-end makeover, the EMG Daniel Defense DD4™ RIII™ Metal Receiver for M4/AR-15 AEG is what it needs! Styled to match the receiver of the latest real steel Daniel Defence DD4™ RIII™ rifles, this receiver is made from flawlessly machined aluminium with an anodised surface finish to guarantee it maintains its good looks in the long term!

The set includes the upper receiver, lower receiver, front and rear body pins, an ambidextrous Grip-N-Rip® charging handle with mock bolt and a Daniel Defense marked polymer dust cover, completing the elite DD look. The upper receiver features DD4™ RIII™ markings prominently engraved and the right side of the magazine well includes realistic Daniel Defense roll marks, just like the real thing. As we might expect, the upper receiver also includes a 20mm Picatinny rail, ready for your choice of optical sight. 

This receiver is designed to fit M4/AR-15 AEGs and should fit most standard non-ambidextrous version 2 gearbox internals, making it the ideal way to style up your boring M4! The rear includes the standard AEG buffer tube mounting lug and the front features standard receiver threading; compatible with a wide range of barrel nuts and handguards so you can get the look you need. Whether you've got a polymer M4 that needs a realism boost or you want a bit of that in-vogue DD flair for your platform without buying a new gun, the EMG Daniel Defense DD4™ RIII™ Metal Receiver for M4/AR-15 AEG is a slick piece of kit!

Airsoft Masterpiece brings its unparalleled pedigree to Hi-Capa frames for an upgrade to your pistol which will take it from good to the next level! The frame is constructed from CNC machined aluminium, which looks pristine and weighs 86g, making your pistol as light as a feather and handle like a dream.

This frame is available in a variety of metallic colours to give your Hi-Capa a sleek, ultra-modern look that's sure to stand out on the battlefield. Installing an Airsoft Masterpiece frame will let your Hi-Capa run as smooth as butter and look even better, while also increasing durability and overall lifespan.

The angled and dynamic design of this pistol frame makes it stand out from the rest, aesthetics and performance have been maxed out. This frame is designed to work with parts that adhere to the Tokyo Marui standard and will not work with proprietary or unique Hi-Capa style pistol designs.

The tactical rail measures 3.5cm long and should accommodate most common pistol flashlights. If you're looking for a durable and stylish frame for your TM Hi-Capa pistol, the Airsoft Masterpiece EDGE "STRAT" Aluminium Frame for TM Hi-Capa GBB Pistols is for you.

Airsoft Masterpiece brings its unparalleled pedigree to Hi-Capa frames for an upgrade to your pistol which will take it from good to the next level! The frame is constructed from CNC machined aluminium, which looks pristine and weighs 86g, making your pistol as light as a feather and handle like a dream.

This frame is available in a variety of metallic colours to give your Hi-Capa a sleek, ultra-modern look that's sure to stand out on the battlefield. Installing an Airsoft Masterpiece frame will let your Hi-Capa run as smooth as butter and look even better, while also increasing durability and overall lifespan.

The angled and dynamic design of this pistol frame makes it stand out from the rest, aesthetics and performance have been maxed out. This frame is designed to work with parts that adhere to the Tokyo Marui standard and will not work with proprietary or unique Hi-Capa style pistol designs.

The tactical rail measures 3.5cm long and should accommodate most common pistol flashlights. If you're looking for a durable and stylish frame for your TM Hi-Capa pistol, the Airsoft Masterpiece EDGE "STRAT" Aluminium Frame for TM Hi-Capa GBB Pistols is for you.

Airsoft Masterpiece brings its unparalleled pedigree to Hi-Capa frames for an upgrade to your pistol which will take it from good to the next level! The frame is constructed from CNC machined aluminium, which looks pristine and weighs 86g, making your pistol as light as a feather and handle like a dream.

This frame is available in a variety of metallic colours to give your Hi-Capa a sleek, ultra-modern look that's sure to stand out on the battlefield. Installing an Airsoft Masterpiece frame will let your Hi-Capa run as smooth as butter and look even better, while also increasing durability and overall lifespan.

The angled and dynamic design of this pistol frame makes it stand out from the rest, aesthetics and performance have been maxed out. This frame is designed to work with parts that adhere to the Tokyo Marui standard and will not work with proprietary or unique Hi-Capa style pistol designs.

The tactical rail measures 3.5cm long and should accommodate most common pistol flashlights. If you're looking for a durable and stylish frame for your TM Hi-Capa pistol, the Airsoft Masterpiece EDGE "STRAT" Aluminium Frame for TM Hi-Capa GBB Pistols is for you.

If you own a CM.127, CM.127S or ASG XP17 Challenger and your mag release has gone missing or broken it's your lucky day! The CYMA Magazine Catch & Spring for CM.127 AEP is a replacement original parts set for the CM.127 and CM.127S AEPs but should also fit the ASG XP17 Challenger AEP. The set includes the mag catch itself and the spring.