All External Airsoft Parts & Attachments

A lightweight and low profile stock for M4 Platform Airsoft Electric Guns which have an AEG style Buffer Tube at the rear. If your motto is 'High Speed, Low Drag', then this stock is perfect for you.

If you're working on an old-school AR build this stock would be perfect! The CYMA CAR15/XM177 Old-school Stock for M4/AR-15 is based on the original XM177 sliding stock but is constructed from a modern high-density polymer, offering weight savings and improved strength while keeping the old-school aesthetic. The adjustment lever is on the bottom, as it is on most M4/AR-15 stocks, and the stock also includes a sling slot/loop built in, ideally suited for strap slings and paracord slings. The stock should fit almost any M4/AR-15 buffer tubes, including both AEG and GBBR types.

Those building a Blackhawk Down or Blood Diamond style AR platform; this stock is what you need to have your build looking perfect. If you are building an L119A1, this stock is also a fantastic stand-in for the "Fiberlite" stock used on the platform in its early life, and while not 100% perfect, most won't notice the difference!

If you are having a hard time seeing down your low-profile red dot sight, this rail riser will make all the difference! The ACM 0.83" Mini Riser Block Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight

Looking to give your AEG that tactical look? Hiding an extended barrel but don't want the long gun look? This CYMA suppressor features full metal construction, 14mm CCW threads and a modern design that is a nice break from boring suppressors - looks at home on a P90 or other modern looking space gun!

A set of four Ladder Type Rail Covers which are made from a semi-rigid Rubber, and will easily slot over 20mm Rails to provide a more flush aesthetic, and to make the rail much more comfortable to hold. This is the perfect addition to any Rail System that has unused slots which are uncomfortable/unsightly. The Rail Covers are easy to manipulate, and simply need to be stretched over 20mm RIS to fit. They can even be cut to length if you require something more boutique.

A set of four Ladder Type Rail Covers which are made from a semi-rigid Rubber, and will easily slot over 20mm Rails to provide a more flush aesthetic, and to make the rail much more comfortable to hold. This is the perfect addition to any Rail System that has unused slots which are uncomfortable/unsightly. The Rail Covers are easy to manipulate, and simply need to be stretched over 20mm RIS to fit. They can even be cut to length if you require something more boutique.

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you have invested in a Tokyo Marui VSR-10 Pro and you want to add an optic, this 20mm receiver rail will do the trick! The Slong Airsoft Receiver 20mm Rail Mount For VSR-10 Sniper Rifle is designed to replace the rear iron sight on the Tokyo Marui VSR-10 Pro sniper rifle but can also be used to replace a worn-out rail on VSR-10 clones or the TM VSR-10 G-Spec sniper rifle.

The rail is constructed from aluminium and finished with matt black anodising, keeping the surface coating thin to ensure the rail remains in spec and capable of mounting any optical sight which fits 20mm Picatinny rails.

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The slide is machined from aluminium and provides a considerable extension to the standard slide stop on a Hi-CAPA GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip.

Lightweight with a semi matte metallic texture, this slide is also a great way to customise and match the aesthetic of your beloved Hi-CAPA and create the perfect custom build.

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The slide is machined from aluminium and provides a considerable extension to the standard slide stop on a Hi-CAPA GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip.

Lightweight with a semi matte metallic texture, this slide is also a great way to customise and match the aesthetic of your beloved Hi-CAPA and create the perfect custom build.

If you want to snipe with your KAR98K this should help you get there! The Double Bell Scope Mount For KAR98K is designed specifically for the Double Bell KAR98K and mounts to the receiver rail on the left side of the rifle, just below the rear iron sight. The mount is intended for scopes with a 20mm monotube and is constructed from alloy with steel screws and a steel release lever.

When choosing a scope for this mount we recommend looking for a scope with an objective lens of less than 30mm in diameter, a 20mm monotube and long eye relief due to the "Scout" style mount location positioned closer to the front of the rifle than the average scope mount.

If your CM.097 lower receiver is damaged maybe it is time to replace it with a fresh one! The CYMA Alloy Lower Receiver for CM.097 M4/AR-15 AEG is a replacement original part for the CYMA CM.097 AEG series and is constructed from alloy. The body pins are constructed from steel for maximum strength, and the fire selector markings are finished in a modern style, with coloured bullet pictograms to indicate each mode of fire.

The set includes all body pins, the fire selector, the bolt catch and the magazine release, meaning no fiddling around trying to swap the trim parts from your old receiver, just drop your gearbox straight in!

If you're working on a British Army KS-1/L403A1 build or you're into the latest real steel suppressor designs, the Angry Gun QDC/MCQ-PRT Suppressor with Shroud & Flash Hider belongs on your shopping list! This suppressor is constructed from CNC machined aluminium and is flawlessly finished, as we would expect from Angry Gun. The set includes the suppressor itself, the shroud (pre-installed) and the flash hider, making it ready to mount on any 14mm CCW male threaded outer barrel.

The suppressor mounts to the tri-prong flash hider via an innovative QD mechanism which requires you to index the pin on the flash hider with the corresponding groove inside the suppressor collar. With this done, turn the shroud counter-clockwise (with the front of the suppressor facing away) to tighten and lock the suppressor in place. The shroud can be removed from the suppressor but we don't recommend this as it can cause damage and ruin the QDC/MCQ-PRT's beautiful finish, which would be a real shame!

The build quality of this suppressor simply cannot be overhyped; if you put it down next to the real deal you'd be hard-pressed to tell them apart! If you're working on a KS-1 build or you want a squat, menacing suppressor in line with the latest real steel suppressor designs, the Angry Gun QDC/MCQ-PRT Suppressor with Shroud & Flash Hider belongs on your build!

The CYMA Front Sling Mount Pin for SMG-5 AEG is a replacement original part for the CM.041 SMG-5 AEG series and mounts to the front sight block to provide a sling loop on the left side. If your original sling loop is damaged or has gone missing, here is your replacement!

The WADSN 5 Position Flashlight Mount is a great way to attach your flashlight to your platforms. It mounts to a 20mm RIS/RAS rail, which is the most common rail found on rifles and SMGs. There is a choice of black or dark earth so you can match the mount perfectly to fit the style of your loadout. It features 5 adjustable positions so you can find the perfect setup for your loadout and ensure you dominate any CQB skirmish!

To fit your flashlight you must first loosen the two screws found at the front and back of this mount, once loose, you can slide your torch in. Afterwards, tighten the screws up again and your flashlight and mount are ready to go! The polymer construction means you don't need to worry about having a front-heavy Airsoft gun once fitted. Mount your flashlight using the WADSN 5 Position Flashlight Mount and become a master of close-quarters surprise engagements!

The WADSN 5 Position Flashlight Mount is a great way to attach your flashlight to your platforms. It mounts to a 20mm RIS/RAS rail, which is the most common rail found on rifles and SMGs. There is a choice of black or dark earth so you can match the mount perfectly to fit the style of your loadout. It features 5 adjustable positions so you can find the perfect setup for your loadout and ensure you dominate any CQB skirmish!

To fit your flashlight you must first loosen the two screws found at the front and back of this mount, once loose, you can slide your torch in. Afterwards, tighten the screws up again and your flashlight and mount are ready to go! The polymer construction means you don't need to worry about having a front-heavy Airsoft gun once fitted. Mount your flashlight using the WADSN 5 Position Flashlight Mount and become a master of close-quarters surprise engagements!

If you're dressing up your CYMA CM.041K, PDW or L, the 5KU 1913/20mm Picatinny Stock Adapter for CM.041K/PDW/L AEGs will give it a touch of modernity! This stock adapter provides an M1913/20mm Picatinny stock interface like MCX and MPX platforms, allowing you to mount the most modern stock options on the market. These range from slimline minimalist stocks to AR buffer tubes, shorty stocks and the Visor stock, designed for use with full face masks and respirators. 

The sheer number of stock options a 1913/20mm Picatinny interface provides is almost unlimited, growing as new stocks are released at an ever-growing pace. If you want an easy way to mount M4/AR-15 stocks or want to future-proof your CYMA SMG-5K with the most cutting-edge stock attachment interface out there, the 5KU 1913/20mm Picatinny Stock Adapter for CM.041K/PDW/L AEGs belongs on your build!

A Tactical Assault Rifle Suppressor for Airsoft Rifles, rocking a 14mm CCW thread this classic suppressor style will fit right on almost any Airsoft Assault Rifle or SMG!

If you are rocking the Sig Air MPX and you are worried your battery will poke out of the handguard, worry no longer, Laylax have an innovative solution! The Handguard Battery Block for MPX AEG is designed to mount to the outer barrel using a grub screw and close the front end of the handguard up to stop your battery from hanging out when the SMG is pointed down. The block is constructed from aluminium with a matt black anodised finish and is styled to look like the gas block of the bigger MCX, meaning it shouldn't detract too much from the realistic looks of the MPX. This is why we love Laylax, they always come up with a nifty solution for these little niggles!

If you're following modern real steel trends and want a red dot on your sidearm, Airsoft Artisan has what you need! The RMR Mount w/ Front & Rear Sight for WE EU17 GBB includes a front and rear sight with an integral RMR footprint mount plate, allowing you to rock an RMR-style red dot sight paired with a cutting-edge iron sight setup on your WE EU series GBB pistol. 

The front sight includes a red light-enhancing insert and the rear sight features anti-glare checkering, giving you an up-to-date sight setup which is great in both bright and dark conditions. The sights are also set at "suppressor height", meaning if you've got a sneaky build planned or are running a tracer you can still get a clean sight picture. 

The plate itself is designed for RMR footprint red dot sights, meaning most RMR clones should fit including our PCS Miniature Red Dot Reflex Sight. This set is designed for the WE EU17 GBB and as such should also fit WE EU19 and EU34 GBB pistols but won't fit WE EU18 GBB pistols due to their redesigned slide. If your EU series needs a touch of modernity, the Airsoft Artisan RMR Mount w/ Front & Rear Sight for WE EU17 GBB will provide!

This metal AK47 body by CYMA is constructed from Aluminium and zinc alloy and is finished in a period accurate gun metal grey. This is the perfect solution for a CM.028 or CM.522 owner who wants to give their AK a metallic feel and increased realism!

The STTI B9/B92 Conversion Kit is a Polymer constructed Body Kit for... you guessed it, B9 and B92 Airsoft Gas Blowback Pistols. This awesome kit will convert your lowly Airsoft Pistol into a functional Carbine with Sliding Stock, 20mm Rail System, Ambidextrous Charging Handle as well as plenty of room for a Suppressor, Inner Barrel Extension or Tracer Unit!

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

If you want a more realistic muzzle device for your CM.041 series SMG-5 from CYMA, the 5KU SMG-5 Tri-lug Muzzle Device is the one to go for! Patterned after the real steel Tri-Lug muzzle device, unlike most Airsoft examples, the 5KU model doesn't include a threaded section at the front, making it more suitable for old-school SMG-5 setups, especially if you're a stitch counter. 

Compatibility-wise, this muzzle device is only compatible with SMG-5s from CYMA, specifically the CM.041 series and won't fit other brands, nor will it fit the -K and SD variants. 

An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW or CW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.

This suppressor has a clever feature which is that it has a 14mm CCW thread on one end and a 14mm CW thread on the other, as such it is compatible with both thread types.