Airsoft Silencers, Suppressors & Tracer Units

If you are building a modernised AK rifle and you want the sneaky special forces look the PUTNIK suppressor from 5KU would be the best thing for it. This suppressor is based on the real steel Zenitco PUTNIK and can be attached to any Airsoft AEG with 14mm CCW male threads via the included steel adapter, and its built-in threads allow it to be fitted to 24mm CW male threads found on some Airsoft AKs. The suppressor is constructed from alloy and has a foam filling which will slightly dampen the muzzle report of your AEG or GBB, and the suppressor can also be disassembled if you want to add an inner barrel extension. For the modern suppressed AK look there is no better suppressor!

If you are building a modernised AK rifle and you want the sneaky special forces look the PUTNIK suppressor from 5KU would be the best thing for it. This suppressor is based on the real steel Zenitco PUTNIK and can be attached to any Airsoft AEG with 14mm CCW male threads via the included steel adapter, and its built-in threads allow it to be fitted to 24mm CW male threads found on some Airsoft AKs. The suppressor is constructed from alloy and has a foam filling which will slightly dampen the muzzle report of your AEG or GBB, and the suppressor can also be disassembled if you want to add an inner barrel extension. For the modern suppressed AK look there is no better suppressor!

If you are looking for a suppressor you can quickly and easily remove as and when it suits you, these are what you are looking for! Available in 3 different lengths to suit any situation, the 5KU Special force suppressor gives a serious and aggressive look to your AEG and alters the muzzle report to make you harder to locate!

If you want a pistol that can reach out and touch the enemy at long range, an extended inner barrel is just the thing. The WE PX001 Silencer And Extended Barrel Kit; 11mm CW is designed for the WE PX001 but is also compatible with most WE GBB pistols if you use your original HOP-up unit assembly.

The kit includes an 11mm CW threaded suppressor for 11mm CW female threaded barrels (WE, Armourer Works, CowCow and some others), a 6.03mm tightbore inner barrel measuring 189mm in length and HOP-up unit for the PX001 platform with a pre-installed bucking.

Please be aware, it is possible that the inner barrel will protrude through the tip of the suppressor when installed on certain compact pistols so make sure you measure up before ordering. We recommend adding the length of your existing inner barrel to the length of the included suppressor (138mm); if the length is equal to or greater than 189mm, the inner barrel will fit.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

If you are looking for a Tracer Unit with Russian styling the KP-9 Spitfire Tracer Unit from 5KU is one to keep an eye on. This device is based on the real world MPI KP-9 flash suppressor used by Russian Special Forces with their PP-19-01 SMGs and is ideal for any 9mm style Airsoft SMG but will fit any Airsoft rifle with a 14mm CCW male threaded barrel.

This KP-9 isn't just about the looks either, inside you will find a Spitfire Tracer insert which illuminates green tracer BBs and provides a realistic muzzle flash effect each time you fire. The unit can be operated in flash only, tracer only or tracer and flash mode, giving plenty of options for the aggressive, the realism focussed and the more stealthy playstyles out there. Whether you run a PP-19 AEG or you are looking for the most menacing looking Spitfire tracer unit out there, this will do the trick!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!

If you have had your eye on one of the super cool new spitfire tracers on the market but would prefer it in a more AK-friendly design, we have just what you need! The Vityaz Spitfire Tracer unit from 5KU combines the awesome functionality of a spitfire tracer unit, with its realistic muzzle flash effect and tracing function when used with tracer BBs with the unique looks of a Russian designed suppressor. 

Looking to give your AEG that tactical look? Hiding an extended barrel but don't want the long gun look? This CYMA suppressor features full metal construction, 14mm CCW threads and a modern design that is a nice break from boring suppressors - looks at home on a P90 or other modern looking space gun!

A suppressor designed to fit onto Airsoft 6mm BB Gun in order to dampen the sound leaving the barrel.

If you have dreams of running your Maxim 9 GBB pistol with an integral tracer unit, your dreams can now become reality! The KRYTAC SilencerCo Maxim 9 GBB Tracer Unit/Extension Kit is designed to fit the KRYTAC Maxim 9 GBB pistol and extends the front end by approximately 3.1cm (not including the front piece) to accommodate the included Acetech muzzle flash tracer unit, though you can still mount the tracer without the extension kit.

The set includes an extension piece and wide front aperture constructed from aluminium, a pair of extended steel guide rods and the tracer unit itself. This is the perfect accessory to take full advantage of the KRYTAC Maxim 9's fantastic performance in a CQB environment!

If you are looking for a suppressor for your lil' AK, you have found the right one. The real world PBS-4 is designed for use on the AKS-74U rifle, but has also been seen in use on full length AK74s!

A highly realistic 24mm CW Suppressor/Tracer Unit made from Steel, with an internal rechargeable battery that lasts for thousands of shots. This Tracer Unit is made specifically for AKs that feature a 24mm CW Thread (please check before purchase), and can be charged using the Micro USB Cable just like your Mobile Phone.

If you're looking for a super-slick suppressor to finish off your cutting-edge build, the Airsoft Artisan HELIOS QD Suppressor w/Flash Hider is calling your name! This suppressor is flawlessly machined using CNC technology, making use of high quality aluminium and steel throughout the build. As we might expect from Airsoft Artisan, this suppressor is an absolutely gorgeous sight to behold, with some of the most precise machining we've seen on an Airsoft suppressor. 

The set includes two mounting options; a QD suppressor collar with a tri-prong flash hider and a direct thread collar, allowing you to switch between QD and direct thread depending on the mission's requirements. Included in the set is a tracer module spacer for 34mm diameter tracer modules (not included) and an aluminium tube designed to support an extended inner barrel or prevent BBs from impacting the inside of the HELIOS. 

Finished in eyecatching Titanium Grey with an aesthetic unlike any other suppressor, the Airsoft Artisan HELIOS QD Suppressor w/Flash Hider is the perfect finishing touch for a modern "gucci" build!

An Alloy constructed Suppressor with Foam Baffles and a Spring Core for support. The end caps of the Suppressor can be unscrewed to access the internals. Designed for Airsoft replicas with a 14mm CCW or CW Thread, this Muzzle Device is the perfect accessory to conceal an Inner Barrel extension, or just to add a personal touch to your Airsoft Gun.

This suppressor has a clever feature which is that it has a 14mm CCW thread on one end and a 14mm CW thread on the other, as such it is compatible with both thread types.

This Alloy Suppressor is designed for Airsoft Guns with a 14mm CCW Male Thread, and features Foam Baffles on the inside, supported by a spring core to provide rigidity. The dimpled end cap of the Suppressor can be removed to access the internals. Whether you need to hide an Inner Barrel extension or you just want to add some 'tactical' to your replica, this Suppressor is perfect.

If you love realism and will do anything to get closer to the real thing, the HASTA NEBULA Tactical Mist Tracer Unit belongs on your primary. The first of its kind in the world, this tracer unit not only provides muzzle flash, rainbow muzzle flash and tracer functionality but also provides realistic simulated muzzle gasses with each shot. With slick new functionality comes the need for intel, so make sure you thoroughly read the "Special Instructions" section of the full product description before ordering!

The mist generation function runs off a water-glycol solution, just like smoke machines used in film and TV production and the internal fan gently blows the simulated muzzle gas out of the front of the suppressor each time a BB passes through. Powered by an internal rechargeable LiPo battery and charged via Micro-USB, the NEBULA is a seriously groundbreaking piece of Airsoft technology and we are proud to be the first to offer it to Airsofters!

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

This Airsoft suppressor is designed to be fit onto 14mm Counter Clockwise (CCW) threads, and is foam filled to reduce the audible output of the weapon. The suppressor is constructed from Alloy, and features a spring core and foam filling, and is finished with US Navy Seal Branding. 

This Airsoft Suppressor is a replica of the PBS-1 which is designed for AK Platform rifles in the real world, but will work with anything that has either a 14mm CCW or 24mm CW Thread. This means it will fit to any replica with a standard thread, but can also directly thread to the Outer Barrel of AK models that have the appropriate thread (such as LCT branded AKs).

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

A mock Airsoft suppressor designed to be attached to the end of Airsoft Rifles to give them a more unique look, and to slightly suppress the sound leaving the barrel. This is the perfect purchase for those who are looking for a suppressor that can be attached to a huge variety of weapons, or for those looking to dampen the noise made from the end of the weapon.

A 14mm CCW compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, teammate locations, run infection themed skirmishes and generally lighting up the dark with bioluminescence.

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of Specna's silencer is the "Bacon" version, marked with "Put Bacon Here" on the outside. Naturally, we don't recommend doing this for food hygiene reasons but Americans have been known to cook bacon using real steel suppressors, taking advantage of the heat build-up to kill two birds with one stone. How very American!

If you are looking for an uncommon tracer unit design with muzzle flash functionality, the T238 Griffon Tracer unit is one to watch. This unit has a unique triangular housing giving it a cutting-edge look, styled similarly to the real steel Griffin Blast Shield and is constructed from aluminium with a thick polycarbonate aperture cover on the front. 

This unit offers both tracer and muzzle flash functionality, allowing you to use either muzzle flash, tracer or both, with mode selection applied via the rear "on/off" button. Powered by an internal rechargeable battery charged via micro-USB, this tracer is convenient and economical to run and can support rates of fire up to an absolutely epic 50 rounds per second! No matter how speedy your build is or how much you value realism, this tracer unit has both bases covered!

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!