Airsoft Pistol Magazines

An 8 round magazine for the SRC 7.65 pistol.

Looking for a CO2 magazine for your SRC Hi-capa to see it through the winter months? You have found what you need! This 28rnd CO2 Magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.

This magazine houses a single unthreaded 12g CO2 capsule which can be loaded through the bottom of the magazine by removing the baseplate. If you want to guarantee your SRC Baba Yaga can hack it when the temperature gets low a CO2 mag is the perfect solution!

They've only gone and done it, the absolute lunatics! A drum magazine for G&G GTP9 and SMC9. Clearly G&G have been listening to the community and have brought us this 300 round wheel wound drum mag resulting in some insane firepower for your now portable LMG in pistol form factor!

A spare magazine for WE Europe's Makarov W65U pistols. The magazine is constructed entirely from Alloy and features an Alloy base plate, making the magazine durable and more resistant to drops. 

An extended 32 round magazine designed for the WE P-Virus P226 gas blowback pistol. 

A replacement or spare Magazine for a RAVEN branded Hi-Capa 4.3 or 5.1. It holds a total of 25rnds and is powered by a 12g CO2 Bulb, which means it works far better in the cold than a Green Gas Magazine. This Magazine will provide much stronger recoil and better shots-per-magazine, especially when Winter is upon us.

This is a Spare Magazine for the G&G Armament Piranha Gas Blowback Airsoft Pistol, constructed from tough Alloy to the original specification. It is filled with BBs using a Speedloader and has Gas inserted from the baseplate via the Inlet Valve. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer, rather than scurrying back to the Safe Zone to reload.

A 50rnd Extended Gas Magazine for a range of ASG Gas Replicas, including the B&T USW, the Shadow 2, SP-01 and CZ 75. If you own one of these replicas and want the ability to throw 50 BBs down range in a hurry, then the firepower increase of a 50rnd Magazine cannot be overstated.

A High Capacity Gas Magazine for WE B92 Airsoft Gas Blowback Pistols. 

An Alloy constructed Gas Powered magazine for the SRC branded TT-33 replica (SR-33). It holds a total of 11rnds and is filled from the bottom with Green Gas via the Inlet Valve. The follower is easy to pull down from the side, and it can be easily loaded by hand or using a Speedloader. Be careful not to let the follower spring up otherwise the feedlips could be damaged.

If you need spare magazines for your Cybergun WE/Armourer Works Desert Eagle GBB you have found them! These mags are constructed from alloy with polymer feed lips, a steel feed spring and brass valves and are compatible with the Cybergun Desert Eagle but only the version manufactured by WE or Armourer Works.

Each mag is designed to mimic the real thing perfectly, complete with mock witness windows on the left side with numerical engravings indicating the capacity of the real Deagle. The gas fill valve is located on the baseplate and the mag is compatible with summer gas, green gas and red gas. Unlike other GBB magazines, this mag cannot be loaded through the feed channel as it is closed off like a GBBR mag and instead must be loaded through the feed lips at the top of the mag, so we recommend using a speed loader with a GBB adapter for ease of loading (like this).

A 29-round magazine designed primarily for use with the ASG Challenger XP17 series of pistols.

An Airsoft 6mm BB gas blowback magazine for the 4.3 Hi-Capa pistol series. The magazine is constructed from Alloy, with Polymer feed lips, base plate and follower.

If you run your Hi-Capa as a primary and find yourself short on ammo, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 GBB Pistols will keep you shooting for longer! This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones. This is the chrome silver version, ideal for the stylish skirmisher. If you need the black version, check it out here!

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Magazine for R501/R603/R604 GBB Pistols will be a useful addition to your kitlist!

A replacement magazine for the CM.125 AEP Electric Pistol which is designed to fit into the pistol and be used to carry extra rounds into the game meaning you don't have to stop mid game to use a fiddly speed loader.

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

A 22 round Green Gas / Inlet Valve Magazine for the UMAREX Glock 45 Gas Blowback Pistol, featuring a top of the range build quality & official Glock trades. 

This magazine is specifically for the STTI ST92F, in that this is a non-blowback mag and features incredible gas efficiency. The magazine is constructed from high high-density polymer and is incredibly lightweight compared to tis alloy counterparts. The magazine holds 23 rounds, filled at the top using a speed loader and the gas is filled at the bottom with green gas.

A 27rnd spare or replacement gas magazine for G&G's latest line of GPM92 gas blowback pistols.

A chrome-effect gas magazine for the WE XDM Compact 3.8, which can hold up to 17 rounds.

A must have set for any Airsofter and Air Pistol Dan Wesson Revolver owner.

If you're looking for spare magazine for your Archon, you've come to the right place. The body is constructed from alloy, for a nice well weighted feel when loading/reloading. Powered by green gas, the mag is filled at the bottom, with the BBs being inserted into the mag using a speedloader via the feed lips or by pulling the spring tab down and filled straight into the BB chamber.

The magazine holds 20 rounds and is fits such models as the EMG Archone Type B.

This Airsoft CO2 magazine designed for use in the WE B92, SAMURAI EDGE and other pistols. Each magazine is of a full metal construction and holds up to 25 rounds. The magazine is compatible not only with the Samurai Edge Pistol, but with any WE B92.

The STTI 28rnd CO2 Magazine for MK23 NBB Gas Pistols is perfect for those winter months. CO2 is much more consistent than green gas in the cold weather, every sneaky sniper needs these mags for their trusted sidearm during those cold skirmishes. It is compatible with the STTI ST-23 non-blowback pistol but also fits in other brands of non-blowback MK23 pistols. It is constructed from a tough Alloy, looking identical to the standard MK23 magazines, and holds a total of 28 BBs.

The CO2 compartment is inside the shell and is accessible from the bottom. To open it, simply undo the bottom screw with an Allen key. With this done, you will see the CO2 capsule space inside, here you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten the Allen key screw back down and you're good to go! 

The Cybergun 35rnd Magazine For Desert Eagle .50AE AEP is exactly what you need to keep your CM.121 or CM.121S in the fight for longer. This unique magazine is designed exclusively for Desert Eagle AEPs and is not compatible with other pistols. It has a capacity of 35 BBs which is useful considering the full auto capabilities of the Cyma Desert Eagles. To load the BBs you can pull the spring downwards and insert BBs directly into the feed lips using a speedloader.

A spare or replacement magazine for the AEG Limited F17/F18 GBB Pistols. This magazine holds 21 rounds and takes 12g unthreaded CO2 capsules. The magazine is of an extended style with a long baseplate, giving your pistol the high capacity look. To install a CO2 capsule, simply pull up on the tab at the bottom of the feed spring and the baseplate should be able to slide off forwards, revealing the Allen screw plug for the CO2 reservoir. Remove this plug with the included Allen key, drop a CO2 capsule in, replace the plug and tighten it down, replace the baseplate and you are good to go!

A spare or replacement magazine for the AEG Limited F17/F18 GBB Pistols. This magazine holds 21 rounds and takes 12g unthreaded CO2 capsules. The magazine is of an extended style with a long baseplate, giving your pistol the high capacity look. To install a CO2 capsule, simply pull up on the tab at the bottom of the feed spring and the baseplate should be able to slide off forwards, revealing the Allen screw plug for the CO2 reservoir. Remove this plug with the included Allen key, drop a CO2 capsule in, replace the plug and tighten it down, replace the baseplate and you are good to go!

If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!

Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.

If you plan to run your Hi-Capa GBB pistol with high pressure air, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is essential. This magazine adapter allows your Hi-Capa GBB to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you want to eliminate cooldown, improve rapid-fire performance and increase your mag capacity, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is what you need!

A spare or replacement Gas Magazine for the Cyber Gun FN Five Seven (5-7), which holds a total of 17 rounds and is constructed to the exact same standard as the original magazine, using Alloy for the body and Polymer for the feed lips.