Airsoft Mounts

A mounting plate designed to fit to allow the attachment of backup and red dot sights to TM based Hi-Capa 5.1 pistols. The plate attaches to the pistol by replacing the rear sight, and using the existing screws secures into place. The backup sight plate is constructed from lightweight yet durable 6061-T6 Aluminium Alloy and secures your sight securely to your pistol.

This mount is perfect for those Airsoft skirmishers who are looking to attach a red dot or backup sight to their pistol in order to make more accurate and quicker snap shots to get an advantage whilst playing.

If you've been working with an improvised sling solution for your VMP-1, time to get professional! The VORSK Sling Plate for VMP-1 GBB SMGs is constructed from steel, mounting between the stock and receiver at the ideal spot for a single-point sling. The plate includes a keyring extension for more flexibility but this can be removed entirely if not needed or replaced with a loop of paracord for a stealthier alternative. 

When installed, the sling loop is centrally positioned below the stock, granting it ambidextrous functionality, great for left or right-handed shooters. Its steel construction guarantees it can take the weight of whatever you've mounted to your VMP-1, giving you a sling solution which is both reliable and looks professional. Compatibility-wise, this plate will work with both the original VMP-1 and VMP-1X but isn't compatible with the VMP-1C. 

A Sling Plate designed to fit on M4 Style Airsoft 6mm BB Guns, fitting on GBB Gas Blowback Rifles between the Receiver and the Buffer tube allowing the attachment of Slings. 

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to Picatinny system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.25 inches and is attached to Picatinny system using the included screws and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you're in search of a sling solution which easy to mount and remove, the Vector Optics QD Sling Socket & Swivel for 20mm Picatinny Rails is ideal. This set includes a QD sling socket for 20mm Picatinny rails and a QD sling swivel, allowing you to quickly remove your sling without the usual detangling process. The included swivel should fit most slings on the market and is constructed from steel for maximum strength. 

To release the swivel from the socket, simply press the central button and it will pop straight out. Remounting it is as simple as pushing the swivel back into the socket where it will lock in place. The socket should also be compatible with aftermarket QD swivels but due to differing specs between manufacturers, we always advise giving the swivel a thorough test before entrusting it with the weight of your platform. 

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

If you are rocking a KAR98k but you want some modern glass, this is a great way to get the job done! The 20mm Picatinny rail mount from Double Bell is designed to fit to their KAR98K sniper rifle and provide a 20mm rail above the receiver, allowing you to mount modern optical sights. The rail mounts into the rear sight mounting apparatus and provides you with 17 slots of 20mm rail, plenty to mount whatever you like. We advise against adding a PEQ, flashlight and T1 but it's your gun and there is enough space, just be ready to run if a reenactor spots you!

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

An official spare sling hook, allowing for the replacement of the lost or broken part of your Airsoft Scorpion Evo. 

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

If you're moving away from standard scope rings in favour of something more modern and lightweight, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is ideal. This single-piece scope mount follows modern trends, combining the front and rear scope ring for a more robust combination setup which is easier to mount as a bonus. 

Its aluminium construction keeps the weight of the One-Piece 20mm Picatinny Scope Mount to a minuscule 138 grams and its raised optical centreline means your scope sits slightly higher than usual, ideal for those who like to keep their knashers protected behind a face mask while skirmishing. Each ring also includes a single slot of 20mm Picatinny rail, ideal for micro red dot sights, Runcam/action cameras or whatever other equipment you need to complete the mission at hand!

Compatibility-wise, this mount should fit any LPVO or Rifle Scope with a 25mm monotube but will not fit 30mm monotube optics. If you want a more advanced scope mounting solution for your primary or have trouble looking through your scope due to your face-pro choice, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is what you need!

If you plan to mount a two-point sling, one of these might be useful! The Vector Optics Offset Sling Mount for 20mm Picatinny Rail is constructed from aluminium alloy and is rated to handle the recoil of real firearms so you can be confident it will never fail when used for Airsoft. The mount fits any 20mm Picatinny rail and is ideal for mounting to a handguard and pairing with a rear sling point so you can mount a two-point sling setup.

The sling loop hole measures approximately 7mm in diameter, meaning it should fit most sling hooks but if you find the fit is a bit too light we suggest using a keyring or paracord loop to provide a bit more flexibility and a wider variety of sling compatibility.

If you need a scope mount with some interesting tricks up its sleeve, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube is exactly that! Constructed from aluminium with a QD 20mm Picatinny mounting interface, the One-Piece 20mm Picatinny Scope Mount V2 is easy to mount to any 20mm Picatinny rail and is nice and lightweight, tipping the scales at a surprisingly low 200 grams.

The V2 is compatible with either 25mm/1-inch or 30mm monotubes, making it useful for almost every magnified rifle scope out there thanks to the included ring spacers. On the top of each ring, we are treated to mounting holes for the included modular 20mm Picatinny rail section, allowing you to fit it to the front or rear ring and install a Runcam, micro red dot sight or whatever else you fancy. The V2 is set at the standard (for AR platforms) optical centreline height, making it ideal for most Airsoft platforms but if you need something a bit higher, check out the original One-Piece 20mm Picatinny Scope Mount; 25mm Tube!

Integral to the mount's design and visible from the rear we also have a bubble level, allowing you to ensure your rifle is perfectly horizontal before taking that key, game-winning shot. If you love a lightweight scope mount which is easy to fit and packs in a lot more functionality than its rivals, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube will suit you perfectly!

If you need something to dangle your P90 from while you do more important work, this sling point will do it! The Laylax Sling Mount w/QD Socket for P90 AEG is compatible with the Tokyo Marui P90 and clones of the TM design, allowing you to use either a QD sling swivel or a conventional hook sling to carry your pride and joy.

The QD sling mount is constructed from aluminium and the D-ring is high density polymer, with the complete system mounting with a robust rubberised fabric strap. This setup is a major advancement over older P90 sling mounting apparatus, and if you like your lil spacegun at the cutting edge, this is essential!

Give yourself some extra sling points with the Novritsch M-LOK QD Point, this alloy mount attaches to M-LOK rail interfaces. It provides you with some additional mounting or attachment options in the form of multiple QD sling points. With this QD point, you can set up unique and unusual sling options, such as a minigun with a double sling point!

The Novritsch M-LOK QD Point is perfect for those looking for additional sling options, just remember to get the QD loops separately!

An Aluminium Alloy constructed Cantilever mount for 30mm Scopes, which easily mounts onto 20mm RIS/RAS Rail Systems. It offers two connection points with four securing screws in each mount. The base of the mount attaches to 20mm rails by unscrewing the securing nuts, placing onto the rail and re-tightening.

If you want to turn your KRYTAC Maxim 9 GBB into a true beast, a red dot sight is a great way to speed up your shooting and make the pistol more effective in low light. The KRYTAC Red Dot Optic Mount Plate for SilencerCo Maxim 9 GBB is designed to facilitate this. The plate is constructed from steel and mounts to the optic cutout on the top of the Maxim 9, providing optic mounting footprints in RMR, Sheild and RMR CC configurations. Make sure you check your red dot sight's mount footprint to ensure it is compatible before buying as not every micro red dot sight is!