Airsoft Magazine Pouches

If you like to run a high speed low drag belt kit, this pouch will suit your needs! The Belt Mounted Versatile Rifle Magazine Pouch from 8Fields Tactical is constructed from robust and hard wearing 1000 denier polyester and can be attached to any belt of 2-inch or 5cm in width using the velcro belt loop attached to the rear of the pouch. This pouch is adjustable in size and will fit M4/AR15 magazines and also AK platform magazines with the bungee cord adjusted to suit via the adjuster on the rear. This pouch also features MOLLE loops on the front, allowing MOLLE compatible pouches to be stacked on top if you need to carry more on your belt rig.

If you are rocking the iconic Thompson Submachine Gun and you want a loadout to match, the 8Fields Tactical US Army WW2 Thompson SMG Five-Cell Mag Pouch is a great place to start. This magazine pouch is part of the 8Fields Classic range, replicating US Army WW2 kit in authentic canvas construction with steel hardware.

The pouch holds a total of 5 Thompson stick magazines retained by press stud-secured front flaps and mounts to any belt via the canvas loop on the rear of the pouch, though for the perfect look, this should be paired with the 8Fields US Army Pistol Belt. As with the other offerings from 8Fields' Classic line, the Five-Cell Mag Pouch boasts realistic markings, with "U.S." and "1942" marked on the rear, just like the real thing.

If you need a rifle mag pouch which fits almost every assault rifle replica out there, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M4/AR-15 mags to AK and 7.62x51 DMR magazines. The only mags that won't quite fit in are HK417 mags, though AR36 mags fit in nicely with some adjustment. 

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring multiple rigs, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is the pouch you need!

If you need easy access magazine pouches for your pistol belt, these will do the trick! The Amomax Double Magazine Carrier For P226/M9 GBB Pistols takes 2 P226 or M9 magazines and has adjustable retention via the screw on the front, and is mounted to its paddle belt mount via a rotary interface, meaning it can be adjusted and set at the perfect draw angle for you.

The perfect solution for the Airsofter who wants to carry as much ammunition in game as possible, and is trying to build a compact rig, or rapidly running out of space on their current set up.

If you need a rifle mag pouch which fits almost every assault rifle replica out there, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M4/AR-15 mags to AK and 7.62x51 DMR magazines. The only mags that won't quite fit in are HK417 mags, though AR36 mags fit in nicely with some adjustment. 

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring multiple rigs, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is the pouch you need!

If you are using a buckle up "micro-rig", or a more modern plate carrier with a velcro lined kangaroo style pouch, being able to attach pouches without increasing the bulk of your rig is a major benefit. This Double AR-10/SR25/7.62 Magazine insert is designed to slip inside a velcro lined pouch, whether it is on the front of a plate carrier or on a chest rig, and hold 2x 7.62 STANAG sized magazines (SR25, M14, SCAR-H). The pouch is constructed from 1000D Polyester and includes male velcro on one side and female velcro on the other, with elastic loops at the bottom to hold the magazines in.

If you're running an AK and need somewhere to stash spare mags, the 8Fields Tactical MOLLE Double Magazine Pouch for AK Rifles is ideal. This magazine pouch mounts to MOLLE webbing commonly found on tactical vests, belts and backpacks, equipped with additional MOLLE loops on the front so you can stack other pouches on top for long-duration ops. 

The pouch is constructed from 1000D Polyester, offering strength via high stitch density. Designed to hold 2 7.62 or 5.45 style AK magazines secured via elastic bungee cords, this is an open-topped mag pouch to allow quick access. You also have the option of removing the bungee retainers entirely to get at your mags even quicker at a small sacrifice of less secure retention. If you're in search of cheap but effective MOLLE AK mag pouches, the 8Fields Tactical MOLLE Double Magazine Pouch for AK Rifles is the one to go for!

A magazine pouch for Airsoft pistol magazines, which can be attached to MOLLE Compatible rigs, vests and backpacks.

A stock mounted magazine pouch, designed to fit on M4 and M16 type Stocks and holds a single STANAG 5.56mm style magazine. The pouch itself is constructed from 600D Nylon, with polymer buckles and velcro securing straps.

A stock mounted magazine pouch, designed to fit on M4 and M16 type Stocks and holds a single STANAG 5.56mm style magazine. The pouch itself is constructed from 600D Nylon, with polymer buckles and velcro securing straps.

A stock mounted magazine pouch, designed to fit on M4 and M16 type Stocks and holds a single STANAG 5.56mm style magazine. The pouch itself is constructed from 600D Nylon, with polymer buckles and velcro securing straps.

A stock mounted magazine pouch, designed to fit on M4 and M16 type Stocks and holds a single STANAG 5.56mm style magazine. The pouch itself is constructed from 600D Nylon, with polymer buckles and velcro securing straps.

If you need sleek, compact and modern pistol mag pouches, Emersongear has what you need! The Laser Cut MOLLE Pistol Magazine Pouch is made from strong 500D Cordura branded fabric, the military standard fabric used in a wide range of real steel combat gear and civilian applications requiring high strength. 

This pouch mounts to MOLLE webbing found on tactical vests, plate carriers, chest rigs, backpacks and belts, featuring additional laser-cut MOLLE on the front so you can stack pouches on top if needed. Fitment-wise, this pouch is designed for standard "service pistol" sized magazines and should fit Hi-Capa, EU series, B9/92, F/P226 and Glock pistol mags securely. Available in a range of camo options to suit almost any loadout, the Emersongear Laser Cut MOLLE Pistol Magazine Pouch is a great solution with modern, low-profile styling!

If you need sleek, compact and modern pistol mag pouches, Emersongear has what you need! The Laser Cut MOLLE Pistol Magazine Pouch is made from strong 500D Cordura branded fabric, the military standard fabric used in a wide range of real steel combat gear and civilian applications requiring high strength. 

This pouch mounts to MOLLE webbing found on tactical vests, plate carriers, chest rigs, backpacks and belts, featuring additional laser-cut MOLLE on the front so you can stack pouches on top if needed. Fitment-wise, this pouch is designed for standard "service pistol" sized magazines and should fit Hi-Capa, EU series, B9/92, F/P226 and Glock pistol mags securely. Available in a range of camo options to suit almost any loadout, the Emersongear Laser Cut MOLLE Pistol Magazine Pouch is a great solution with modern, low-profile styling!

If you need sleek, compact and modern pistol mag pouches, Emersongear has what you need! The Laser Cut MOLLE Pistol Magazine Pouch is made from strong 500D Cordura branded fabric, the military standard fabric used in a wide range of real steel combat gear and civilian applications requiring high strength. 

This pouch mounts to MOLLE webbing found on tactical vests, plate carriers, chest rigs, backpacks and belts, featuring additional laser-cut MOLLE on the front so you can stack pouches on top if needed. Fitment-wise, this pouch is designed for standard "service pistol" sized magazines and should fit Hi-Capa, EU series, B9/92, F/P226 and Glock pistol mags securely. Available in a range of camo options to suit almost any loadout, the Emersongear Laser Cut MOLLE Pistol Magazine Pouch is a great solution with modern, low-profile styling!

If you need sleek, compact and modern pistol mag pouches, Emersongear has what you need! The Laser Cut MOLLE Pistol Magazine Pouch is made from strong 500D Cordura branded fabric, the military standard fabric used in a wide range of real steel combat gear and civilian applications requiring high strength. 

This pouch mounts to MOLLE webbing found on tactical vests, plate carriers, chest rigs, backpacks and belts, featuring additional laser-cut MOLLE on the front so you can stack pouches on top if needed. Fitment-wise, this pouch is designed for standard "service pistol" sized magazines and should fit Hi-Capa, EU series, B9/92, F/P226 and Glock pistol mags securely. Available in a range of camo options to suit almost any loadout, the Emersongear Laser Cut MOLLE Pistol Magazine Pouch is a great solution with modern, low-profile styling!

If you're looking for discrete pistol mag pouches to stash inside your velcro-equipped dangler pouch, chest rig or plate carrier, these will do the trick! The 8Fields Tactical Velcro Triple Pistol Magazine Insert holds 3 standard-sized pistol magazines and retains them via elastic for a secure fit. 

This insert is designed to be used with Micro Chest Rigs and plate carriers equipped with interior velcro, mounting via a strip of velcro on the front and rear of the insert. Please note, these are not designed to mount to a single layer of exterior velcro and are only for interior velcro which attaches to both the front and rear of the insert. 

For those of you running snipers or DMRs with larger magazines, 8Fields have got the pouch for you. Constructed from tough water-resistant 1000D Cordura, the pouch flap is secured by both Velcro and a sturdy polymer buckle.

The pouch will fit 2x SCAR-H, G3, A14 or SR25/AR10 magazines, although it will also fit a whole host of other magazines, asl well as a whole host of other tactical devices such as radios.

Attached via any MOLLE equipped surface, such as rigs and bags, you can be sure that your mags will be kept safe and sound.

A Large Utility Pouch for MOLLE compatible systems, which will easily mount onto any MOLLE loops to provide a large pouch which is ideal for tools, grenades, mags, maps or any other important piece of kit that you need to keep secure in a waterproof dual-zip pouch.

The front of the pouch also has a Velcro front pocket and flip-down see-through documents pouch, as well as a pistol magazine pouch to give a fantastic all-in-one pouch that gives you a huge range of options when it comes to carrying items and tactical equipment during skirmishes.

For you German WWII enthusiasts, this is a quality set of 2x MP40 magazine pouches from SRC. A faithful reproduction of magazine pouches for the most famous German submachine gun from World War II. With real leather straps, this is great for war re-enactments.

A light and small profile solution to keeping your M4 ready and easily accessed at a moments notice. The 8Fields Plate Carrier Triple AR-15/M4 Magazine Insert gives your mags perfect retention, keeping them safe and secure with quick access for speedy reloads.

With front and back Velcro, it gives you the flexibility to attach it wherever you please as long as its Velcro including kangaroo pouches of a lot of plate carriers.

Open topped magazine pouches are a great way to simplify your reloads and get faster! This 8Fields Tactical magazine pouch is designed to hold a single M4/AR15 STANAG style magazine but has some adjustment built into the design to allow for polymer magazines to be used, and also allow the retention to be adjusted for added security. This pouch features MOLLE hooks on the rear, allowing it to be attached to any chest rig, tactical vest or plate carrier with MOLLE compatibility, and also includes MOLLE loops on the front so you can stack additional pouches on top for longer engagements where more ammo may be required. Your mag is secured into the pouch using a bungee cord loop, which can be removed entirely for a faster and uninhibited draw. This pouch is constructed from 1000D polyester to provide the necessary strength for use during Airsoft skirmishing.

Pistol mag retention or rifle mag retention? This pouch offers the best of both worlds.

The two stacked pockets in a low profile design, held together with adjustable elastic bungee retention cord, you can be sure that both your main and sidearm mags are kept safe and secure and to hand for quick reloads all in place!

The magazine pocket is designed for STANAG type mags in mind with the front most pistol pockets able to fit a whole range of pistol magazines such as EU17 or 1911 systems.

Mounted by MOLLE retention straps, this pouch is for those of you that like to keep things compact and efficient, with  for those speedy reloads in the heat of battle.

Looking for a lightweight, simple and small profile method of keeping your pistol mag safe and accessible at all times? Look no further!

This elastic insert is perfectly sized to house a range of pistol magazines and can be attached anywhere on your loadout with some spare Velcro so you can customise your setup to how you play. Fits to kangaroo pouches of a lot of plate carriers and also features front facing Velcro.

A modular MOLLE pouch designed to securely store one standard sized Airsoft pistol magazine, and can be fitted to a variety of belts or rigs. 

If you're looking for a pouch that covers both your primary and sidearm, the Delta Armory MOLLE AR/Pistol Tactical Combo Pouch is the one for you! This pouch features a section for both a standard M4 magazine and a pistol magazine, so you can make sure your loadout is covered with one convenient pouch. This pouch mounts to MOLLE making it compatible with chest rigs, plate carriers and tactical belts.

The top of the pouches are open, and the magazines are held in place using bungee pressure retention, meaning magazines can be quickly and effortlessly removed during tactical reloads, and placed back in the pouches easily without using any noisy Velcro or press studs. 

If you're looking for a handy way to store magazines for both your platforms on the battlefield, the Delta Armory MOLLE AR/Pistol Tactical Combo Pouch is exactly what you need!

If you're looking for a pouch that covers both your primary and sidearm, the Delta Armory MOLLE AR/Pistol Tactical Combo Pouch is the one for you! This pouch features a section for both a standard M4 magazine and a pistol magazine, so you can make sure your loadout is covered with one convenient pouch. This pouch mounts to MOLLE making it compatible with chest rigs, plate carriers and tactical belts.

The top of the pouches are open, and the magazines are held in place using bungee pressure retention, meaning magazines can be quickly and effortlessly removed during tactical reloads, and placed back in the pouches easily without using any noisy Velcro or press studs. 

If you're looking for a handy way to store magazines for both your platforms on the battlefield, the Delta Armory MOLLE AR/Pistol Tactical Combo Pouch is exactly what you need!

If you need somewhere to stash your sniper rifle magazines, Novritsch has what you need! The Full Seal MOLLE Pouch for SSG10 Magazines holds a single VSR-10, SSG10 or SSG10 Full Thrust magazine and is a full seal design which keeps your magazine secure during energetic movement while preventing dirt and debris from getting inside. 

The pouch mounts to MOLLE webbing found on chest rigs, plate carriers, tactical vests, belts and backpacks and can be positioned wherever you like, as long as you can reach it when needed!

If you like to run a wide variety of pistols, this is the mag carrier for you! The Ghost Dual Universal Mag Carrier consists of a rotary paddle mount, a custom 3D printed adapter and two "Scorpion" universal pistol mag pouches, giving you the perfect combination of wide compatibility with the proven IMI-style rotary interface. This mag carrier mounts to any belt of 2" width or less, meaning you don't have to run a chunky MOLLE belt to run this super slick carrier!

If you've ever wanted a product which doesn't exist yet, you'll understand why Patrol Base Gary conceived this! Not content to settle for sub-optimal, he decided to create the perfect hybrid magazine pouch, suitable for all Airsoft pistol magazines and featuring adjustable retention and draw angle.

Whether you're running a Desert Eagle, Hi-Capa, Five-seveN or MK23, this mag carrier will retain your magazines effectively thanks to its adjustable retention and you'll never have to swap pouches when you swap pistols. If you run an SMG, you'll be happy to learn that most SMG magazines also fit, including MP7, ARP9/AR-9, Scorpion EVO and UTR45 mags. Perfect for a minimalist CQB loadout!

The 3D printed adapter which connects the Scorpion pouches to the rotary interface is very thoughtfully designed, with a professional finish, rounded corners and print lines running diagonally, avoiding any potential weakness associated with 3D printed parts. The material used is PLA+, a stronger, more ductile and flexible alternative to PLA ideal for the rigours of the skirmish field.

We have given this pouch a thorough battle test at HALO MILL: Proving Grounds and it performed perfectly, avoiding the usual potential of lost magazines which is a major issue with mass-produced polymer mag carriers. If you're sick of switching mag pouches when you change pistols, the Ghost Dual Universal Mag Carrier on Rotary Paddle Mount is the solution!