Airsoft Attachment & Accessory Discounts

If you want to run your Specna Arms PDW stock-equipped rifle all day, this is what you will need. With a considerable amount more room than the original battery tube, this tube can take up to a 7.4v 1450mAh LiPo battery.

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

A series of Medium Capacity magazines for LCT branded AK platform Airsoft Electric Guns. They hold a total of 130rnds and feed BBs into the gun via a spring, meaning they feed until empty. We recommend the use of a Speedloader to fill them. They are available in a choice of three colours and are a replica of the Bakelite 5.45x39mm magazines, however will work with any LCT brand AK.

A replacement spring for your Airsoft AEG weapons.

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function! 

A steel-constructed sling plate designed to fit on Airsoft M4/15/16 AEG (Electric) Receiver.

Looking for spare mags for your Spicy Vorsk VX26 GBB? Here they are, with a whopping 30 round capacity and a nice polymer baseplate to protect the magazine from accidental drops. This magazine is for use with green gas and is loaded through the feed lips at the top or by pulling the follower down and loading though the widened section of the follower channel. You can use either a speed loader or do it by hand, though we advise the former if you're in a hurry!

If you need some big mags for your big boy AR, the SR25, this should do the job! The NUPROL 130rnd W-Mag Mid-Cap for SR25 is styled to suit modern setups and has a rubberised baseplate for extra grip during a reload and also allows for the "mag podding" technique to be used on smooth surfaces. This mag is a windowed design, meaning it has mock witness windows on either side showing mock 7.62x51mm cartridges inside for a realistic look. The magazine can be filled through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod.

This magazine is compatible with the Classic Army pattern of SR25, meaning it should work in the A&K and CYMA SR25 rifles as well, but will not fit ARES/Secutor or G&G patterns. The style of this magazine is a great fit for any modern SR25 platform and has a waffle textured surface for enhanced grip and strength, and a "dot matrix" at the bottom on each side so you can numerically mark your magazines.

The Competition Recoil Buffer Module from CowCow is designed to shorten the travel of the slide of your pistol, increasing its cyclic rate. The set includes 8 recoil buffer pads of varying hardness which can be stacked in various combinations to fine tune your pistol for optimum speed.

If you need bigger mags on your AK, the Specna Arms S-Mag High-cap is a great shout. The S-Mag is constructed from high-density polymer with unique SA texture on the outside to add traction for improved wet weather handling. This is a wheel-wound high-cap magazine, meaning it holds an absolutely epic 430 BBs and needs to be wound periodically via the winding wheel on the baseplate.

To load the S-Mag High-cap, simply open the fill port on the top of the magazine and pour your BBs in. Once filled, wind the wheel on the baseplate 5-10 times, load it into your AK and get busy. This magazine is ideal for the Specna Arms J-series but should also fit in most other AK AEGs. 

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

A Polymer constructed Thumb Rest for 20mm RIS Rail Systems, which will provide a stable platform to comfortably brace the front of your replica, enhancing ergonomics and improving comfort when aiming for long periods of time.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

If you want to sneak about with your PPSh-41 AEG, ditch that drum magazine and use this instead! The 130rnd Mid-Cap Magazine for SW-09 PPSh-41 AEG from Snow Wolf is authentically constructed with a hefty and solid steel shell to compliment the already very realistic SW-09. This is a mid-cap magazine, meaning no battle rattle to alert the enemy as you advance, and easy loading through the fill/feed port at the top of the magazine body with no need to wind it up. 

This magazine is compatible with the Snow Wolf SW-09 PPSh-41 AEG but unfortunately won't fit the S&T version. If you're a stealthy skirmisher using a Snow Wolf PPSh-41, these magazines are essential!

An upgraded hammer is a great foundation to any upgraded AAP-01 build, especially if you are an HPA user! The CowCow SS Hammer is CNC machined from strengthened alloy with a stainless steel finish, and MAF polishing technology is applied to its exterior surfaces to reduce friction between parts and ensure smooth operation of the pistol.

The Spenca CORE™ V2 Gearbox Shell provides 8mm bushings, radiused cylinder windows to help prevent cracks, and quick release spring functionality. Perfect for starting your ultimate gearbox build! 

If you have a magazine which leaks from the fill valve, or your mag is a bit old and the valve has taken a hammering over the years, a replacement valve is the way to go. This Specna Arms valve replaces the fill valve in your magazine with a nice fresh one, complete with an O-ring to ensure there are no leaks! This valve will require a valve key to install.

If you are building out your dream Airsoft Hi-capa GBB pistol, the CowCow Stainless Steel hammer strut would be a great addition if you require an improved trigger feel and better mechanical engagement. This part is constructed from stainless steel with a titanium coating to prevent corrosion and warping. When installed into your TM based Hi-capa or 1911 GBB this part should help improve shot to shot consistency and provide longevity far beyond the original parts.

If you are building out your dream Airsoft Hi-capa GBB pistol, the CowCow Stainless Steel hammer strut would be a great addition if you require an improved trigger feel and better mechanical engagement. This part is constructed from stainless steel with a titanium coating to prevent corrosion and warping. When installed into your TM based Hi-capa or 1911 GBB this part should help improve shot to shot consistency and provide longevity far beyond the original parts.

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

This polymer constructed piece is designed to screw into your outer barrel assembly, to lock your Inner Barrel in place and removing any motion that is is able to have. This will help improve accuracy and consistency by stopping the inner barrel from wobbling as the BB travels through it. There is an option available for most major platforms, and is an absolute must-have piece for those seeking perfection in their rifles.

If you're looking for a new grip for your M4/AR-15, the SigAir MPX Pistol Grip for M4/AR-15 AEG is a great option. This pistol grip is constructed from high-density polymer and boasts licensed SigAir trademarks, perfect for realism nuts!

The MPX pistol grip has a reduced grip angle for improved comfort with short stocks and a filled-out backstrap to support the web of the hand more effectively. The set includes the grip itself, the baseplate and the baseplate screw and should be compatible with the majority of M4/AR-15 AEGs and other AR AEG grip compatible platforms. Whether you're working on a Sig build or looking for a new grip with realistic markings, the SigAir MPX Pistol Grip for M4/AR-15 AEG is ideal!

A complete upgrade Cylinder set for AEGs which includes: Cylinder, Piston, Cylinder Head, Piston head and Nozzle. Improve your air seal and shot for shot efficiency today for improved range and accuracy.

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.