Airsoft Motors

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs.

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound.

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs. 

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound. 

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs. 

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound. 

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for an upgraded AEG motor with the best price-to-performance ratio, you're looking for the Warhead Industries Base Brushless Motor! This brushless motor was conceived as a more affordable alternative to the legendary Warhead CNC Black Brushless Motor, boasting similar performance at an unbeatable price point. This, the short shaft variant, is designed for AR36, Thompson, AUG and AK AEGs. 

Like the Warhead CNC Black motor used in Bolster Armouries builds, the Base boasts an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed to keep the immense power of the Base under control. The primary difference between the Base and the CNC Black is that the base uses a cast aluminium housing instead of a CNC machined one and the stator is wound via machines while the CNC Black is hand-wound. 

The advantages of running a brushless motor are numerous, the most important of which is a far higher torque to weight ratio than conventional motors. The lack of brushes means there is less to go wrong and the motor is far quieter when running, guaranteeing a longer lifespan of smooth running performance. That said, these motors are intended for highly upgraded setups so we only recommend them for those who are confident working on AEG internals. If your custom-built beast needs an equally beastly motor to drive it, the Warhead Base Brushless Motor; Short Shaft is one of the best choices out there!

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance. 

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed. 

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance. 

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed. 

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you're looking for top-tier performance from your next AEG build, the Warhead Industries CNC Black Brushless Motor belongs inside! This, the long shaft variant, is designed for standard M4/AR-15, SMG-5, G3 and P90 AEGs and is the same motor used in Bolster Armouries custom builds, a testament to its quality, reliability and incredible performance. 

The CNC Black Brushless motor boasts a CNC 7075 aluminium housing and hand-wound stator, promising a more precise wind than machine-wound stators which translates to improved power and efficiency. To keep the immense power of the Warhead CNC Black under control, the motor is equipped with what is known as an ESC (electronic speed control) module which protects your battery, provides low-voltage cutoff and regulates speed. 

The perks of a brushless motor over conventional motors include higher torque-to-weight ratio, reduced wear and tear, reduced operating noise and reduced heat build-up, allowing you to let rip with long bursts guilt-free! If you have your sights set on the pinnacle of AEG performance, the Warhead Industries CNC Black Brushless Motor; Long Shaft is the motor you need to achieve it!

If you have had a gearbox failure and you don't fancy opening it up, the CYMA Complete Version 2 Gearbox w/High Torque Motor & ETU is a pre-upgraded and pre-wired replacement which can be installed with minimal effort and no need to solder or open the gearbox shell. As always, we recommend you have some technical experience before installing a new gearbox, but when it comes to Airsoft upgrades this is about as easy as they get.

This gearbox set is designed for M4/AR-15 AEGs and has the correct nozzle length and selector plate for the task and is also pre-wired to a Deans connector so you can benefit from a lower resistance connector for increased electrical efficiency. Also included with the set is a CYMA high torque Neodymium magnet motor, providing a very snappy trigger response and the power to handle stronger springs than a standard motor.

The icing on the cake is the pre-installed MOSFET/ETU which prevents gearbox lock-up on semi-auto, provides further improvements to the trigger response and a boost to the rate of fire. If your M4 gearbox has issues or you want to freshen up an old M4 with a brand new and pre-upgraded gearbox this set would be a fantastic choice, avoiding the messing around and getting you back to shooting with minimal effort!

A replacement O type AEG motor pinion gear, intended as a spare, replacement or upgrade component. 

This Motor Pinion Gear is an O-Type design, constructed from Steel and made for Airsoft Electric Guns to replace broken, damaged or worn parts. If Pinion Gear has lost teeth or worn down, it's only a matter of time before it stops working completely; stock up on vital spare parts like the Battleaxe Steel Motor Pinion Gear, today.

A series of Steel manufactured Motor Pinion Gears for either the TOP M60/M249 or Tokyo Marui AEG motors.

If you're working on the ultimate AEG build, the Warhead Industries Ronin CNC Brushless Motor; Long Shaft should be on your shopping list! Outdoing even the legendary Warhead CNC Black brushless motors used by Bolster Armouries, the Ronin is the absolute pinnacle of AEG motor technology, boasting improved quality magnets, a titanium shaft assembly, hard-wired spade connectors and a weight-reduced rotor. 

"Ronin" means a wandering Samurai, a reference to the Warhead Industries stator winding master, a single expert with over 20 years of winding experience who hand winds each Ronin motor personally. While the CNC Black motor also has a hand-wound stator, this is done by regular line workers and while precise, cannot match up to the efficiency and quality of the expertly wound Ronin. 

If you want your AEG shooting at its absolute best and maintaining it in the long run, the Warhead Industries Ronin CNC Brushless Motor is essential. Naturally, such a high-performance motor will require expertise to run properly and other reinforced parts to keep up. If you're the techy type and require the best brushless motor on the market, this is it!

If you're working on the ultimate AEG build, the Warhead Industries Ronin CNC Brushless Motor; Long Shaft should be on your shopping list! Outdoing even the legendary Warhead CNC Black brushless motors used by Bolster Armouries, the Ronin is the absolute pinnacle of AEG motor technology, boasting improved quality magnets, a titanium shaft assembly, hard-wired spade connectors and a weight-reduced rotor. 

"Ronin" means a wandering Samurai, a reference to the Warhead Industries stator winding master, a single expert with over 20 years of winding experience who hand winds each Ronin motor personally. While the CNC Black motor also has a hand-wound stator, this is done by regular line workers and while precise, cannot match up to the efficiency and quality of the expertly wound Ronin. 

If you want your AEG shooting at its absolute best and maintaining it in the long run, the Warhead Industries Ronin CNC Brushless Motor is essential. Naturally, such a high-performance motor will require expertise to run properly and other reinforced parts to keep up. If you're the techy type and require the best brushless motor on the market, this is it!

A Spare or Replacement Motor for Airsoft AEG which require a High Quality Motor as part of an Upgrade Build or Repair. 

If you have a damaged wire, snapped motor connector or just want to improve your electric conductivity then this pack is ideal.

A High Power, High Torque Motor, which is a great replacement for Stock or Damaged Motors. ARES have created these motors as a direct replacement for any AEG which uses a Long Shaft motor, however as this motor is designed for High Torque output, please ensure that your Airsoft AEG Gearbox is set up for High Torque operation. 

If you need to replace a worn out or damaged motor, or are simply interested in tinkering with your Airsoft AEG improve its performance, these ARES manufactured High Torque motors are an excellent choice.