Valentines Day 2021: Cool bits under £50

A pouch designed specifically to house your ExFog AntiFog System and keep it settled on the back of a helmet setup. The pouch attaches via a large surface area of Velcro and has a side window to allow users easy access to the controls of the unit, whilst also allowing them to route the hoses how they wish. The main flap is secured by Velcro and has a large Velcro panel to attach name/rank slides and other morale patches.

A pouch designed specifically to house your ExFog AntiFog System and keep it settled on the back of a helmet setup. The pouch attaches via a large surface area of Velcro and has a side window to allow users easy access to the controls of the unit, whilst also allowing them to route the hoses how they wish. The main flap is secured by Velcro and has a large Velcro panel to attach name/rank slides and other morale patches.

A pouch designed specifically to house your ExFog AntiFog System and keep it settled on the back of a helmet setup. The pouch attaches via a large surface area of Velcro and has a side window to allow users easy access to the controls of the unit, whilst also allowing them to route the hoses how they wish. The main flap is secured by Velcro and has a large Velcro panel to attach name/rank slides and other morale patches.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Be safe while charging your Airsoft batteries! If it goes wrong, it really goes wrong. The NUPROL LiPo Safe Storage Charging Bag is designed to store LiPo batteries and other Lithium batteries plus their charger during the charging process, reducing the chances of damage in the event of a LiPo / Battery fire. Better to be safe than sorry!

This charging bag is the perfect size to hold a charger and a battery when charging or to store some batteries when they are not in use.

If you need maximum carrying capacity to keep pace with your heavy trigger finger, the MOLLE Triple Stacker M4/AR-15 Magazine Pouch fits the bill. This combination pouch holds 6 x M4/AR-15 magazines in open-topped pouches with elastic bungee cord retainers to keep them secure. The bungee retainers can also be adjusted or removed entirely to allow for extended magazines, a tighter fit for more security or a looser fit for faster access. 

The pouch mounts to MOLLE webbing loops found on plate carriers, chest rigs and backpacks and is ideally mounted on the front centre but can be fitted wherever you have spare MOLLE space. Constructed from 1000D Nylon,  the Triple Stacker pouch provides ample strength to handle the rigours of Airsoft skirmishing with the added benefit of increased tear resistance thanks to its high stitch density.

If you need maximum carrying capacity to keep pace with your heavy trigger finger, the MOLLE Triple Stacker M4/AR-15 Magazine Pouch fits the bill. This combination pouch holds 6 x M4/AR-15 magazines in open-topped pouches with elastic bungee cord retainers to keep them secure. The bungee retainers can also be adjusted or removed entirely to allow for extended magazines, a tighter fit for more security or a looser fit for faster access. 

The pouch mounts to MOLLE webbing loops found on plate carriers, chest rigs and backpacks and is ideally mounted on the front centre but can be fitted wherever you have spare MOLLE space. Constructed from 1000D Nylon,  the Triple Stacker pouch provides ample strength to handle the rigours of Airsoft skirmishing with the added benefit of increased tear resistance thanks to its high stitch density.

If you're looking for a speed loader with the perfect combination of capacity and portability, the Delta Armory 450rnd Speed Loader is a fine choice. Based on the original Tokyo Marui Speed Loader XL design, this loader is patterned after real steel NATO STANAG 5.56 magazines and as such, fits nicely into M4/AR-15 magazine pouches. 

This speed loader is designed primarily to load Airsoft mid-cap and low-cap magazines through its fill aperture at the top rear of the body and can be filled through the fill window on the bottom. To deploy the thumb plunger, simply pull the textured sliding button rearwards and it will pop out, ready to load. Stowing the plunger again is equally easy; simply push it down and slide the button forward to lock it in place. 

Also present on the top is a fold-out adapter for GBB pistol magazines, meaning you can load your AEG or GBB with the same loader, saving you space on your rig. An additional adapter for wider feed lips is also included, giving you plenty of options and allowing you to load almost any Airsoft gun without resorting to breaking your thumbs! If you need a speed loader to take into battle with respectable capacity and not too much bulk, the Delta Armory 450rnd Speed Loader will sort you out!

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

For all you CQB run and gunners looking for a way to store your Airsoft SMG mags, 8Fields Tactical has got you covered. Compatible with P90, UMP and SMG-5 Platforms, the pouch is belt mounted and fixed to the leg with straps so you've always got your mags to hand, secured in place with Velcro straps.

For all you CQB run and gunners looking for a way to store your Airsoft SMG mags, 8Fields Tactical has got you covered. Compatible with P90, UMP and SMG-5 Platforms, the pouch is belt mounted and fixed to the leg with straps so you've always got your mags to hand, secured in place with Velcro straps.

For all you CQB run and gunners looking for a way to store your Airsoft SMG mags, 8Fields Tactical has got you covered. Compatible with P90, UMP and SMG-5 Platforms, the pouch is belt mounted and fixed to the leg with straps so you've always got your mags to hand, secured in place with Velcro straps.

If you, like many others run the coveted PDW style stocks but find yourself needing more battery space, CYMA have got something that fits the bill. Designed for rifles such at the CM.097E and CM.041G, this stock extension unit attaches to the base of the stock and gives you roughly 3cm of additional space to house larger batteries, which allows you stay in the field longer and keep picking off those all important targets.

Constructed from tough and sleek aluminium, this extension will blend right in with your loadout and no more will you fear running low in the heat of battle.

A lightweight balaclava, designed to keep your face covered during Airsoft skirmishes or when outside in cold and harsh conditions. 

A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

This Pistol Mag/Multitool Pouch for MOLLE from 8 Fields Tactical provides the perfect solution for carrying small and strangely shaped items, such as multitools or speed loaders, but can also take pistol magazines if you require a more generic pistol mag pouch that can hold magazines of varying width. The pouch can be attached to any MOLLE equipped surface, and uses a buckle at the front to secure the pouch lid. 

This Pistol Mag/Multitool Pouch for MOLLE from 8 Fields Tactical provides the perfect solution for carrying small and strangely shaped items, such as multitools or speed loaders, but can also take pistol magazines if you require a more generic pistol mag pouch that can hold magazines of varying width. The pouch can be attached to any MOLLE equipped surface, and uses a buckle at the front to secure the pouch lid. 

This Pistol Mag/Multitool Pouch for MOLLE from 8 Fields Tactical provides the perfect solution for carrying small and strangely shaped items, such as multitools or speed loaders, but can also take pistol magazines if you require a more generic pistol mag pouch that can hold magazines of varying width. The pouch can be attached to any MOLLE equipped surface, and uses a buckle at the front to secure the pouch lid. 

This Pistol Mag/Multitool Pouch for MOLLE from 8 Fields Tactical provides the perfect solution for carrying small and strangely shaped items, such as multitools or speed loaders, but can also take pistol magazines if you require a more generic pistol mag pouch that can hold magazines of varying width. The pouch can be attached to any MOLLE equipped surface, and uses a buckle at the front to secure the pouch lid. 

If you are after a large rifle scope for your DMR or Snipers rifle, take a look at the Luneta 3-9x40 EG scope from Theta Optics! Fully adjustable and featuring a crisp Mil-dot reticle which can be illuminated red, green or blue with varying levels of brightness, the Luneta 3-9x40 is perfectly suited to long range precision.

A replacement dust cover for the top of CYMA CM.040 AK47 Variant Rifles, designed to add a top 20mm RIS / RAS Rail for the attachment of Sights and Scopes without the use of a Side Scope Mount. 

For those of you looking for a sturdier grip and improved range this vertical foregrip allows you to keep a low profile with a longer weapon at range or tougher grip when running and gunning during CQB.

For those of you looking for a sturdier grip and improved range this vertical foregrip allows you to keep a low profile with a longer weapon at range or tougher grip when running and gunning during CQB.

An unique futuristic hard Polymer lower face mask with mesh ventilation for use in Airsoft. 

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!