NUPROL

A slab of Wave Foam for the Nuprol Large Hard Case which replaces the lower piece completely in the Nuprol Large Hard Case.

A baseball cap designed for use in Airsoft skirmishes to protect the user's vision from bright sunlight. The Cap is constructed from 100% Cotton, is coloured and has several ventilation air holes to keep your head cool in the heat of the moment.

An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries.

If you need magazines for your A&K Dragunov SVD these should fit the bill! The NUPROL 110rnd High-Cap magazine for A&K SVD is designed to work in the A&K Dragunov SVD AEG series but will not work in the CYMA or Real Sword SVDs. The magazine fits the classic SVD aesthetic thanks to its stamped steel shell complete with reinforcing ribs.

The magazine can be filled via the fill window at the top rear of the magazine and the winding wheel is located on the baseplate and needs to be wound in order to tension the magazine. 

A double magazine pouch designed to hold up to two M4 / M15 / M16 / STANAG / PMAG Magazine, and can be attached to MOLLE Compatible Rigs, Vests and Bags.

This style of magazine pouch is perfect for Airsoft skirmishers who are usually up close and personal, hiding in bushes, or for those who simply want a faster magazine reload time.

A double magazine pouch designed to hold up to two M4 / M15 / M16 / STANAG / PMAG Magazine, and can be attached to MOLLE Compatible Rigs, Vests and Bags.

This style of magazine pouch is perfect for Airsoft skirmishers who are usually up close and personal, hiding in bushes, or for those who simply want a faster magazine reload time.

If you need magazines but you also want to add a more modern look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 320 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see your BBs and with the dot texture, this mags gives a modern look to any Airsoft M4/AR15 AEG.

A Double Magazine Retention Pouch designed for WE Europe Airsoft 1911 Pistol Standard Sized Magazines. The holsters are constructed from Durable Polymer and are designed to allow the user to gain access to their Magazine and draw them as quick as possible.

This Airsoft Battery and Charger pack features the NUPROL 9.6v 1600mAh Ni-Mh Crane Battery,the NUPROL NPC-01 NiMh Battery Charger, and the NUPROL Safe Charging Bag which are perfectly matched to work with each other, a great choice for anyone new to Airsoft and looking for a battery for their gun. 

If your Airsoft gun comes with a sample 9.6v Block or Crane style battery and charger then this is one of the first things you should buy. The battery will last longer, charge better, and will be of much higher quality than the free gift battery included for testing in some Airsoft gun boxes!

A Polymer constructed Mid-Cap Magazine for AR/M4/M16 platform Airsoft Electric Guns, which holds a total of 130rnds and is a semi-transparent design with dummy rounds inside.

A LiPo battery with a universal electric pistol connection that will allow it to be used in pretty much every Airsoft Electric Pistol we can think of.

A retention holster designed to fit snugly WE Europe F226 Series Airsoft Pistols and can be attached to the users belt, and is designed to allow the user to quickly and effectively draw their pistol during combat at maximum speed, whilst still remaining safe. 

If you want to add a tactical flashlight to your Airsoft pistol, the NUPROL NX200 would be a fine choice. The NX200 is constructed from alloy, and sports a bright CREE LED with 200 Lumens output. 

The NX200 has a 20mm Picatinny rail mount built into the body, offering quick mounting and removing without the need for tools, and has a built in ambidextrous "rocker" switch, which offers both momentary and constant-on for both left and right-handed shooters. The rocker switch is placed perfectly to be activated with either the tip of your trigger finger, or your reaction hand thumb, making the NX200 remarkably intuitive to use, and easy to become proficient with. If you want to take your pistol game to the next level, the NX200 will get you there! 

Please Note: The Colour of the bronze variant has changed in our most recent batch, it is now much lighter than the images show. Please refer to the colour swatch in the "Specification" section for a more accurate representation of the new "Light Bronze" finish. Product Images will be updated shortly. 

An extra Nuprol N96 magazine for the sniper who wants to stay in play for longer. Add a couple of these to your rig and you can hide in a bush for hours!

NUPROL's latest environmentally friendly offering into the Airsoft Market with newly designed 0.20g BBs made to be offer consistent performance and great accuracy, which Degrade and Breakdown over time after use. 

If you are looking for heavy-weight biodegradable BBs, NUPROL's RZR BBs would be a great choice! RZRs have a superb reputation for precision and tight tolerances and this version is made from a biodegradable material which means you can shoot as much as you want without worrying about cleanup afterwards. 

A replacement bulb cap, which is used to secure CO2 Bulbs in the bottom of WE EU Magazines and P&M Series Pistol Magazine. The cap is constructed from alloy, and is finished black, and features a large Allen Key hole in the bottom. 

An absolutely massive 11.1v 2000mAh Li-Ion battery in a stick configuration, which allows you to squeeze as much lifespan out of your Airsoft Electric Gun as possible, by offering a lower cost and higher power density vs. LiPo batteries.

If you are looking for magazines with a modern style for your AK rifle, this will do the trick! The NUPROL 500rnd Waffle High-Cap magazine is designed to work with AK47/74 AEGs and is a 7.62x39mm style magazine. The mag has a waffle texture on the outside to add gripping qualities and improve strength and is a wheel wound high capacity magazine which holds a 110 BBs.

The magazine can be filled via the fill window at the top of the magazine body and is tensioned using the winding wheel on the baseplate. This mag has the curve of a 7.62x39 style magazine making it ideal for AK47/AKM rifles but can be used in most standard AK styled AEGs.

A Double Magazine Retention Pouch designed for WE Europe Airsoft B92 Standard Sized Magazines, designed to allow the user to gain access to their Magazine and draw them as quick as possible, allowing for a quicker reload, making them more effective in the field. 

If you have plucked too much or your case foam has got a bit dirty, NUPROL has the cure! The Essentials Hard Case Replacement PnP Foam is sized to fit their NUPROL Essentials Rifle Hard Cases perfectly and is an easy and affordable way to breath new life into an old and weary hard case.

Those of you need some big mags for your big boy AR, the SR25, this will do the job! The NUPROL 550rnd W-Mag High-cap for SR25 is styled after a famous polymer LR magazine and is a wheel-wound high-cap. The magazine is filled using the fill window at the top of the magazine body and is tensioned via the winding wheel on the baseplate.

This magazine is compatible with the Classic Army pattern of SR25, meaning it should work in the A&K and CYMA SR25 rifles as well, but will not fit ARES/Secutor or G&G patterns. The style of this magazine is a great fit for any modern SR25 platform and has a dot textured surface for enhanced grip and strength, as well as a see-through panel on either side to help keep track of your ammo at a glance.

Designed to be attached to Rigs, Vests, Carriers as well as Belts allowing you to conveniently carry around additional shells. This is a much neater way of getting shells rather than storing them loose in pockets or in admin pouches.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design with a sound control mode, which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.

This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

If you have damaged your battery connector or you need spares for a build project, this set will sort you out! The NUPROL Mini-Tamiya Connectors Set includes 2 male and 1 female mini-Tamiya connectors with black external connectors.

The packaging states that the set includes 1 male and 2 female connectors but this is based on the external connector design. What is actually included is one connector for your gun(female) and 2 for the battery side(male), click here to see why we classify battery connectors this way.

A useful spare to have around for repairs and equally useful for scratch builds, the NUPROL Mini-Tamiya Connectors Set is a great set to have around just in case!

This is an open-top retention pouch designed for 5.56mm magazines, however, due to it being able to open up much wider, this pouch will work for 7.62mm magazines also.

This is an open-top retention pouch designed for 5.56mm magazines, however, due to it being able to open up much wider, this pouch will work for 7.62mm magazines also.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.