RAVEN EU17 GBB Pistol w/BDS

This Gas Blowback Airsoft Pistol is an EU17 replica which comes out of the box with a Red Dot Sight installed for rapid target acquisition. The RIF is constructed with a tough Alloy slide and a high-density Polymer frame which is not only robust but offers fantastic grip even when wearing gloves. The frame can be made wider for those with bigger hands by installing the included back straps to the back of the grip.

The main feature of this series of pistols is the included Red Dot Sight which comes pre-installed at the rear of the slide, to offer rapid target acquisition, easy sight picture and most importantly: it looks absolutely amazing! The light-enhancing Ironsights have been redesigned so that they can be seen through the Dot Sight should you ever run out of battery mid-skirmish, so that you can keep on fighting. 

The Dot Sight is easily controlled from two push buttons on either side and comes with a handy tool to make adjustments to Windage and Elevation (Up/Down, Left/Right), so that you can have your pistol shooting spot on the mark. Underneath the frame, you will find a 20mm Tactical Rail which is ready for your Torches, Lasers or anything else you can throw at it. The end of the barrel features an 11mm CCW female thread which will let you install Thread Adaptors and Suppressors, should it not already be stylish enough for you out of the box!

The pistol is powered by Green Gas and throws out 0.2g BBs at 295FPS (average) with a strong recoil, even more so when you use the included CO2 conversion parts to run this pistol on a CO2 bulb (using a separately purchased CO2 magazine). The CO2 conversion is really handy for when Winter rolls in and Gas Pistols start to struggle with the cold weather; you can be sure that your pistol still fights through it where others will fail. On the underside of the frame is a trigger lock safety which is activated by pulling the black tab to the rear, which will then lock the trigger and stop the pistol from firing. 

If you love the comfort, reliability and compatibility of the G-Series pistols, but wish it was easier to install a Red Dot Sight on your slide, then the guys at RAVEN have you covered. This pistol is perfect for all weather conditions and is one of the most cost effective sidearms you can run in Airsoft.

Features

• Part of NUPROL's RAVEN series of pistols
• Integrated Red Dot Sight
• Low-light front ironsight
• Tactical Rail slot
• Alloy Top Slide
• High density Polymer frame
• Textured/stippled grip
• CO2 conversion parts included
• 24rnd Gas Magazine
• GEN 4 large Mag Release
• Strong recoil
• Good all-weather performance
• Rubber cover for sight
• Trigger lock safety
• Semi Automatic action

Package Includes

• RAVEN EU17 + BDS
• 24rnd Gas Magazine
• CO2 Conversion Parts
• Backstraps x 2

Special Instructions

The RAVEN EU Series magazine release can sometimes require bedding in when new. If you find the magazine of your EU series pistol falls out or does not lock into place, we suggest the following steps: 

• Tap the magazine on the baseplate firmly after insertion. This ensures the magazine catch engages with the cutout on the magazine to retain it properly. You can check whether this has worked or not by looking at the magazine release button. If the magazine is fully locked, the button should protrude on the left side and be flush with the grip on the right side. 
• Bed the magazine catch in. This can be achieved by locking the slide back and inserting and removing the magazine repeatedly several times. 

Please note that the sight battery is not included. The specific battery you will need is a CR2032 3V 'Button' Battery.

The externals of the replica are metal where they would be on the real world gun. This includes things like the outer barrel, handguard, and receiver. If a real world gun has polymer parts then the gun will still be marked as full metal externals, examples of this would be an M4, where the Stock and Pistol grip are always made from Polymer.